[Worklog] White Timantti (mITX MoD) ~ Smasher

[Smasher]

White Timantti

Integrate performance, cooling and beauty in the smallest space possible, not impossible.
We begin this project with this ideology.
Go through this worklog developed displays neatness, sobriety, extreme beauty and a model ever seen. (So far)
Named White Timantti (White Diamond in Finnish) highlighting the earliest described

The project would be as follows (Not finished design, as it progresses will be modified and go up photos of the scheme)

Without further ado, I proceed to present our sponsors. Thank you very much!

We started the project with MDF Laminated.
As always, the photos speak for themselves.

Terminations curves at the edges:

Surprise! Ahah

Da ModderSuperstar

Next week I go over advancements! Greetings!

PS: Any idea to make the I / O back panel? (Structure which hold the pci-e, inputs / outputs motherboard, etc)

[Smasher]

Well I bring you more developments! The Slim DVD cover:

Fixing of all parties:

Hope you like in a few days I go more progress!
Greetings!

[OvRiDe]

I like it! Looking forward to seeing it progress

[Smasher]

Came watercooling!

Stay tuned for updates!

[Smasher]

Well after a while I went back to study the project and leave you some progress, excuse the poor quality of the images, I have no good camera!
Support HDD. Thanks to Mr. Magerakis for the idea!

Then it goes putty.

Power button

Cutting shrink, all the same size.

The victim…

And missing cables. In the week update! Greetings!

[Twigsoffury]

What are you going to cover the wood with?

that 3m Carbon fiber vinyl would look really sharp. Especially with some recessed SMD strips and frosted acrylic or something!

[Smasher]

Well, here we stay last time… Presentation of the components to make the cuts, holes and final measurements

Lets start flexing like Millon Dólar PC Style!!!

Working Area… a bit disordered, but I order it every one or to days

Your opinion:

Here I will make a break to show you what will be the deposit; the liquid runs through the deposit and will be cooled by a TEC (Peltier) with a cooper block… There are some missing modifications, such as a guide to parse the input and the output of the fluid.

This is an old Cooper block that imade for a Microproc. WC. It has the middle modification for the acrylic tube.

After stick it with special acrylic glue, we check for leaks with liquid at rest;

As a Chrystmas present, www.pcmodd.com.ar brought to the project the WC fittings

This is the test I’ve made with the Peltier cell, cooper block in touch with the fluid at the “cold side” of the Peltier, and a sink + cooler to chill out the “hot side”.
The results were pretty good, at first, the temperature increased with the water at rest, then, I moved the water at the reservoir and this are the results.

Frozen Water!!!

Making atest,i checked that the Cooper blockwith the cell needs an insulation to avoid condensation… Also, I had an issue with a molex, the cables were very thin so they overheat… talking with “masbuskado”, he told me the solution… Thick cables to dissipate the heat.

Aftersome tets, we still making changes; a hole to pass the radiator hose  Deposit

With the “fresa” and the Dremel 4000’s complement, this is a piece of cake thing

No its time to set the bomb to the box, Using pop rivets, modifying it and making it bagel, it’s a good choice to make bagels to wood.

www.facebook.com/SmashModding !

PSU Fan Paint

PSU Fan Grill. Later we will see the draft design.

Now the Fan Radiator support!

If you have any advice, opinión (positive or negative) I read the comments. See You Next Time !

[SXRguyinMA]

looking good!

[NightrainSrt4]

Love it! Keep up the good work.

[jdbnsn]

excellent design!!