ok. got the ok from the accountant to possibly buy something Monday. I measured the CPU mounting and it looks like it may fit.
ok. got the ok from the accountant to possibly buy something Monday. I measured the CPU mounting and it looks like it may fit.
On Backup:: CPU- Q9300 Stock HS/F :: MB- Intel board :: RAM- 4 GB Corsair Dominator DDR2 1066 (2x2GB) :: GFX- 8800GS HDD- 320GB OS; 1x2TB Storage :: ROM- DVD-ROM :: PSU- Antec 48W :: OS- Win7 x64 :: CASE- CM Centurion 590 :: MON- Dell 1708FP :: MOUSE- Logitech G5 ::
Hope it works out. Awesome price for a CPU block that's brand new.
Definitely. It looks like the mounts are 2.5" diag. and about 2" from outer edge of mounting post to outer edge of mounting post. If that is the 2" they are measuring, I would be good there.
The problem I might run into is the short side is only about 1.75" from outer edge to outer edge of mounting post. Amazon had it listed as 2"x2".
On Backup:: CPU- Q9300 Stock HS/F :: MB- Intel board :: RAM- 4 GB Corsair Dominator DDR2 1066 (2x2GB) :: GFX- 8800GS HDD- 320GB OS; 1x2TB Storage :: ROM- DVD-ROM :: PSU- Antec 48W :: OS- Win7 x64 :: CASE- CM Centurion 590 :: MON- Dell 1708FP :: MOUSE- Logitech G5 ::
When you get the block, if you can post up dimensions I'd much appreciate it. Hole patterns, block interface location, inlet/outlet centers, etc. I'm gonna need some blocks for TRON: Legacy.
I have a hammer! I can put things together! I can knock things apart! I can alter my environment at will and make an incredible din all the while! -Calvin
If I get it. I am having second thoughts with the dimensions. I will definitely post pics though. If i order and can't use, would you buy it from me?
**update**
well, hope i don't fail again.
ORDERED::::
OCZ block
AS5
USB-3.5MM audio jack
On Backup:: CPU- Q9300 Stock HS/F :: MB- Intel board :: RAM- 4 GB Corsair Dominator DDR2 1066 (2x2GB) :: GFX- 8800GS HDD- 320GB OS; 1x2TB Storage :: ROM- DVD-ROM :: PSU- Antec 48W :: OS- Win7 x64 :: CASE- CM Centurion 590 :: MON- Dell 1708FP :: MOUSE- Logitech G5 ::
Depends if it fits what I need it for. Not sure if it'd work or not, but need real dimensions to verify. Definitely interested in learning more about it due to it's price.
I have a hammer! I can put things together! I can knock things apart! I can alter my environment at will and make an incredible din all the while! -Calvin
NP, I figured that. lol no sense in buying something if it doesn't fit. oh.. wait.. that is what I might be doing. lol Per Amazon tracking, expected eta Mar 2 due to free supersaver shipping. I'll throw a ruler in with some pics for dimensions once I get it.
On Backup:: CPU- Q9300 Stock HS/F :: MB- Intel board :: RAM- 4 GB Corsair Dominator DDR2 1066 (2x2GB) :: GFX- 8800GS HDD- 320GB OS; 1x2TB Storage :: ROM- DVD-ROM :: PSU- Antec 48W :: OS- Win7 x64 :: CASE- CM Centurion 590 :: MON- Dell 1708FP :: MOUSE- Logitech G5 ::
Well i pm'd a guy over at another forum selling one of these- http://www.sidewindercomputers.com/swmcqupo2x.html
Since I just registered to pm them, I hope it went through. They require 50 posts before posting in their FS/FT thread.
On Backup:: CPU- Q9300 Stock HS/F :: MB- Intel board :: RAM- 4 GB Corsair Dominator DDR2 1066 (2x2GB) :: GFX- 8800GS HDD- 320GB OS; 1x2TB Storage :: ROM- DVD-ROM :: PSU- Antec 48W :: OS- Win7 x64 :: CASE- CM Centurion 590 :: MON- Dell 1708FP :: MOUSE- Logitech G5 ::
Might have found the vga cooler. Need to double check measurements though.
Thanks to the xspc link i found the cooler, then searched and found it for sale.
http://www.frozencpu.com/products/14..._X20CHIP2.html
On Backup:: CPU- Q9300 Stock HS/F :: MB- Intel board :: RAM- 4 GB Corsair Dominator DDR2 1066 (2x2GB) :: GFX- 8800GS HDD- 320GB OS; 1x2TB Storage :: ROM- DVD-ROM :: PSU- Antec 48W :: OS- Win7 x64 :: CASE- CM Centurion 590 :: MON- Dell 1708FP :: MOUSE- Logitech G5 ::
Not bad. Nice price.