Taking a little longer than anticipated to do the feet, what a surprise.
Filing / Weren't the same as each other which I expected with them being complex-ish & only doing a partial template. / Clamped them both together & filed them to be the same or at least very similar.
Pretty nice I think after a few swipes of the drum sander on 240 grit.
Tried doing the small pieces the same way by clamping them but they are too small to do that so I first tried to grind them down on the disc sander, didn't seem a great idea so fixed up a massive vice which was wasting away in the back yard so I could file properly, I used a little of the grinded angle as a guide for what angle I needed to file at & then finished off on the disc sander, these small pieces were far more work than the bigger triangle pieces but all parts are now ready to fix together.
I then got my drum sander on the go in the drill press to make all visible edges a bit nicer, they still need more finishing but they are quite nice now, the smaller pieces mount upside down to how they are in the pictures.
I'll try to complete the feet tomorrow, careful bit of drilling, cut a few rods & it should be a pretty simple process, would have done it in this session but I was feeling wasted so called it a day.
Sound card came today.
Found another place which had the extra drum sanders in stock, a rocking horse specialist shop so I cancelled with the one I been waiting about 2 months for & bought from the new place, should have them soon hopefully.