PROJECT: Quake3 (reborn)

[fiendskull9]

Hey all!

This is the new worklog for my quake3 project,

the last project i did, i wasnt proud of, so i stripped it down, and im starting again.

the goals have changed :

Gloss black and Cold Blue scheme
Dual blue cold cathodes inside
Stealthed CDROM, with button rerouted to custom front bezel
Front bezel will be customized (switch board and LED's)
Side frosted window, with worn look
The entire scheme will have a worn look, but still slick.

------------------------------------------------

Im also wiring in a switch for the cathodes, to add the the main switch board.

---------------------------------------------

Ive got a video with the cathodes wired up to the switch when i get the damn camera USB cable

-clay

STAY TUNED

[fiendskull9]

LIGHTS WIRED VIDEO

Heres the video of the new switch wired in

im going to extend the wires and sauder it to the switch (not just screwed in)

http://fiendskull9.frih.net/mod/lights.mov

-clay

[fiendskull9]

FINAL LED IDEA

-----------------------

Im going to wire up the old CCFL switch to some LED's to a male molex

The leds will be mounted on some strips of acrylic vertically mounted on the window side of the case.

heres the diagram

im buying the LED's tommorow hopefully, and ill throw some pics up when finished

-clay

[fiendskull9]

2ND COAT OF PAINT!
---------------------------

After wetsanding with some 800 grit, i sprayed on the 2nd coat!

----------------------------

Im going to menards today to pick up some more spraypaint (im tired of paying 15 bucks for 2 cans at tru value!)

-clay

[fiendskull9]

Just got done with all the saudering~

I now have -

Stealthed CD drive, with re-routed external button, to be mounted on bezel

LED pci bracket, with switch, and molex connector (i hope this works, those damn LEDs were 4 bucks!)

Cold Cathodes with toggle switch to be mounted on bezel...

-clay

[fiendskull9]

CAMERA BROKE!
so no pics until we get new one
-----------------------------

I did the rubbing compound today (turned out nice, one panel is a little iffy, might redo)

and i did the Quake3 logo etch on the window, and just glued the window on, and its drying.

---------------------------

Im going to wire everything in tonight

------------------------

I have no idea if this box will even be up and running, because the guy we bought the Mobo off of on ebay (although he has 99.9% positive) ****ed us over...

its been 3 weeks, and weve emailed him numerous times asking for invoice on payment...

if anyone is willing to sell a dual P3 (hell, even single p3) mobo for like 20-30 bucks, please email me!


-clay

[Nagoshi]

EBay.com is the best for mobos... altho good P3 mobos are $$$, if you are lucky you can find one at $10...

[fiendskull9]

These pics are horrible

Ill get pics in the sun, wheres theres not so much dust, and better light

-clay

[Nagoshi]

OMG! Couldnt you resize them to a decent resolution at last? 2576x1932.... the Quake3 etching is taking all my screen place.. and Im using 1280x1024... We cant even see it...

[crenn]

Hmmm.... Those edges don't look great (for the window), unless that is the look you're going for. If it isn't, grab a file and use it on them. Some repainting would also help if you did this. But overall nice work.