the haxx revolution begins

[haxx]

Okay to start my mod is in no way a MOD this here is a slow long process at building a new standard in case theory.

I am a person that bites into problems until there fixed and for that reason realize as any good techy knows many a problems will arise.

For that reason alone.......

Problem #1
I need a digital diagram for every current Form Factor to scale with the
screw holes on the MoBo indicated on the diagram.

My Email addy to send these to is hax-x@hotmail.com

thanx in advance

[haxx]

My second problem is cooling the PSU's I will be using.

I know that liquid cooling a PSU is much more difficult and i know some of reasons.

If anyone has any first hand info please post away.

[AKA_RA]

depending on how powerful they need to be, you might just be able to get one thats already water cooled. considering how dangerous powersupplies can be, this is one of the few occasions where i think buying it instead of making it is a forgivable sin.

[haxx]

thanx for the response

were as i have not decided on the electronics yet i have o idea what my total power consumption will be.

i would also like it to be applied to any PSU

[GT40_GearHead]

do you wanna water cool a standard psu

[sirkillalot617]

i wouldnt advise watercooling your psu as when i tested it when i worked in a internet server room it leaked and blew up the psu almost frying the company cat it would be safer using fans

[GT40_GearHead]

http://www.bit-tech.net/modding/2006...se_mod/10.html
this is the type of psu that one could say that it was made for w/c

[haxx]

ok so im getting input here.

I wasnt sure i would on the psu's

So far in the meantime ive come across an idea as to how to water cool the PSU's by passively sending the heat through pipes to a water cooled blok.

No diagrams or solid info as of yet though.

And GT40_GearHead i really like the possibility of using these german supplys
as they will be small enough to make my custom box about 1/10 smaller.
thanxs for the link.

[TheGreatSatan]

http://www.bit-tech.net/modding/2006...se_mod/10.html
this is the type of psu that one could say that it was made for w/c

250Watts won't be good for anyone.

Can you at least describe what idea you have for the case design? Are you gonna buy a case and modify the layout or are you gonna go from scratch?

[Silenced_Coyote]

He hasn't give us the idea yet but he said he would be posting soon.

From his other thread, he said that the project will be a full case build, not a mod. So it sounds like it will be from scratch.