1971 Dodge Super Bee Mod

[TheGreatSatan]

I bought a 10 inch UV cathode from AutoZone. These are brighter than ones made for PC's.

I got out a spare molex

Then I cut off the end and separated the 12V from the ground.

I did the same with the molex

Then soldered them together.

And it works!

So I put it in the case.

Next comes the engine/processor mod. I bought an 80mm blow hole funnel and a 120mm to 92mm fan adapter.

I slid one into the other....

And cut away the excess.

Then screwed it back to the heatsink.

Finally, I used silicone to bond the engine top to the structure.

[Nostradamus]

sorry but red cable in molex is 5V

[TheGreatSatan]

Yeah, I just figured that out too. I thought it seemed a little dimmer.

[Shikimaru]

oh dear, looks good mate

[TheGreatSatan]

So I started loading the OS

[jordy_wd]

Looking good, I like the lighting in the case, not too much, not too little...but just enough to create a brilliant effect for a briliant case

[TheGreatSatan]

Here's the final pics. I did add a stripe to the bottom of the keyboard.

[nil8]

That's really sweet TGS. Good job. I really like how well the top and front panel compliment each other.

[NamesAreUseless]

The motherboard arrived today. (The second one I bought)

if you look at the cans in the picture u can see its mountain dew an a bawls drink
the case in the pic looks like a chieftech case

[TheGreatSatan]

Send to completed logs...