for the screen use a psone screen nice and cheap and easy to use. and for the program use samurise. It is easy to program sure someone could make you what you need
for the screen use a psone screen nice and cheap and easy to use. and for the program use samurise. It is easy to program sure someone could make you what you need
You guys are crazy. Ok if you want pics Ill warn you, Its not a grusume as before. Butterfly stitches work great for these type of things.The pics kind of blurry but, you can see where the bit went in on the right and exited on the left. The scratched part is were I yanked my finger away and ripped the skin. Trust me when I say it was oozing. Ive never bleed like that before.
(I cant believe Im filling my work log with junk .)
I woulda cussed for a couple minutes, cleaned it up and wrapped it up with something then got back to it
not sure how bad this would look, but how about a little chalk board there instead of an lcd screen? or maybe a printed picture of your favorite map in the game? ...
Well Iv ordered A few parts that should be in this week.
The first parts I ordered was an on/off key to disable the remote start and the on/off switch on the case. This way I can keep tabs on everyone .
I also ordered some switches for the on/off and reset.
danthegeek.
Hey where did you get that ignition? Im making a Car-themed case mod and need a car-like ignition...
-Indybird
My Reviews
Logitech G25 // Razer Barracuda AC-1 // Gateway FHD2400 // Logitech G9 & ID Grip // Xbox 360 HD-DVD
Scythe KAMA-Meter // Sceptre X20WC
Key Start/Arm
Theres the link. They have all different kinds to chose from, just scroll down and you will see them. They are cheap to, just be careful of the $7 shipping.
That key lock/switch is pretty cool i may include it in my first mod
- Computer-Geek
Ok, I have some real updates for everyone. I got a good hour of work into this case today.
I re-cut the angled aluminum for the top plate support. The edges almost line-up but its good enoughh for government work .
I also made the top plate for the case. That was probably the easiest part of all so far. My measurements were nearly dead on and I didn't screw up with the dremel once. I still have to trim the back plate to be flush with the top and I also have to drill the holes for the screws to secure the top.
Closer Look- Front
Back
I also took a pic with the door next to the case so you can get the idea of what it will look like.
I also bought a new toy today. I got the cut-off wheels EZ-Lock kit. Let me tell you, I will never go back to the old discs. Not only does it take 2 seconds to put on a new wheel, but they last alot longer as well. Im talking 3-4 times loger.
Well thanks for looking at my mod, I plan on attaching the front and raer doors tomorrow so dont stray far .
-danthegeek