you should bring it anyway! i might be bringing my OPP csae without a comp inside (atleast a working one )Well I wont be done in time for the NJ show
you should bring it anyway! i might be bringing my OPP csae without a comp inside (atleast a working one )Well I wont be done in time for the NJ show
OPP Transformers Case / Dangerously 1337 / Hell's Regect
Its a 2 1/2 hour drive. Its a little far just to show a work in progress. When is the next show around the baltimore and philly area?
EDIT- What do you guys think about bullet holes? Should I thow a couple in or leave it the way it is. I would cover the holes in plaxi and have the red lights shine through.
Idea??
Oh, if you have any suggestions on hole placement pm me a pic..
I bought some milliput putty from ebay to fill all of the unneeded holes in the side of the case. Hopefully it will be here soon and the temperature will cool off a bit outside so i can get rockin on this case. Im really starting to get excited about this again.
-danthegeek
danthegeek
Keep modin' !!!
This is mod I like ones. Let's Kick it !
As I see this bullet holes were shoped, right?
Not to bad. But also not to awesome.
I think that u should make ones when u finsh this. It's to ealier to get them in ur project. IMHO .
Keep goin' man. I like it.
EDIT
I would rather to kick it in real then goin' with bullet holes. Realy. Ram it, smash it maby.
It would look like from real first front line. Real Battlefield should bring it to U.
Thats my thoutghs .
Code:ar -r God
I gotta say, my first thoughts were to go for real bullet holes as well. I dont know about where you are, but here they even have places where you can rent a fully auto machine gun...
I continued work today on the receiver for the remote start.
I started by taking some 3 pin connectors from old fans and wiring them to the receiver. I did this so I can easily disconnect it from the power and motherboard.
I then started to sand, primer, and paint the receiver box and the front cover of the switch box.
I didnt get much done today sense it was raining outside most of the day. Well, tomorrow some more interesting stuff. I start on cutting the front bezel and the front fan hole.
are u going to th NJ show at all? we need as many TBCS members as we can get!
just bring your armour case!
one member down -> many more to go
OPP Transformers Case / Dangerously 1337 / Hell's Regect
Today i only had time to cut the front hole for the 120mm front fan.
I traced an outline and made my ruff cut first
I then cleaned it up with the dremel, sandpaper, and the marked the spots to drill the holes for the screws.
I ended by primer and painting the edges of my cut and the front fan grill. I havent decided if I will keep it green or paint it black. The green seems to blend in and make it seem like it is built in.
Ill post a small update later of the fan installed once it has dried. And what color should I paint the fan; black or green?
-danthegeek
Heres a few pics of the receiver box and the switch box
The switch box with its new paint.
The receiver
I made a sticker and took some sand paper to it and the cover to make it look worn.
-danthegeek
why not go for a 140 mm fan?, and it should be black... think it would look to green with a green fan as well
is that a 120.9 raddy on your case, or are you just happy to see me?
METO V.1
METO V.2
METO V.3
PC-Beto
Project M8 [WIP]