I know I did post this a while ago, but it seems like we cleaned the forums and it was supressed, and Im decided to do it but I need tips. Might as well post it there in the case someone else is wanting to do it. Ive got two circuits types that are said to working. Here are the links.
http://www.ovelha.org/pasteler0/2005...blinking-leds/
This one is using a TIP31, but is said to get fautly and won't blink after a while.
http://www.runtimeerror.net/blinky/index.html
This one uses resistors and a 9V battery as power supply.
Which one would you recommend, I dont mind getting the components since I know a guy who can get about anything for cheap.
As I said, some people are complaining (in the comment section) about the TIP31 not working after a while, and the resistor scheme (second link) seems to work better (by looking at the video) but I don't like the 9V battery. If possible, Id use power from a 5/12V Molex, or 5V from the USB (cause I might be doing a project with my USB memory stick, look in the mod help section).
Basically, Id build a pair of one of these circuits, each one built on a separate channel (one left, one right) so I will have the best visual effect. But Im currenly trying to find a way to perfect them. The resistor scheme would be perfect, if combined to a molex or USB, is there a way to do it? And would it works as well as on the 9V battery? Thanks!