Page 1 of 4 1234 LastLast
Results 1 to 10 of 32

Thread: Australian Modding Supplies Guide

  1. #1
    I come from a land down under. simon275's Avatar
    Join Date
    Jun 2006
    Location
    Sydney, Australia
    Posts
    3,075

    Default Australian Modding Supplies Guide

    So you are an Aussie and you want to get your hands on modding gear that are mates in the US are tinkering with then here are a few stores to spend your hard earned money in.

    ===Places in Australia===


    http://www.pccasegear.com.au/

    PC Casegear are the most well known and established modding suppliers in Australia. They sell modware such as mesh as well as watercooling kits, case lighting and window kits

    (Ship Australia wide, Melbourne pickup during business hours)

    -------------------------------------

    http://coolpc.com.au

    Cool PC

    Sells cases, pc modding gear and also modding gear for consoles as well. Along with geek gadgets and wear. They also have a range caffeine products for those long nights at the lan.

    (Ships Australia wide Pickup from Durack in also Queensland available)_

    Thanks to Sting for this one

    -------------------------------------

    http://www.gamedude.com.au/

    Game Dude

    Sell large amount of cooling products and computer hardware.

    (Ship Australia wide, Have stores in Brisbane)

    -------------------------------------

    http://www.anyware.com.au

    Are suppliers who supply to computer stores Australia wide. They seem to supply quite a few modding supplies. Send them an email and see if they supply any where near you.

    -------------------------------------

    Dick Smith Electronics http://www.dse.com.au sell some modding supplies made by flexiglow. www.flexiglow.com.au

    Only the Dick Smith Powerhouses sell the modware they have lit up fans, cold cathodes, el wire and if you are lucky an acrylic case.

    (Stores Australia wide)

    -------------------------------------
    Leading Edge Computers

    http://www.leadingedgecomputers.com.au/index.jsp

    For those that live in the country side and want to get their mits on some modware then Leading Edge Computers will be able to supply the basics case, cathodes and fans.

    (Stores Australia wide check the website for a store near you)

    -------------------------------------

    ===Other Stores in Australia===


    -------------------------------------

    For models and paint check out Hobbyco. With stores in the city and at Rhodes and Macarthur Square.

    -------------------------------------

    If you are looking for Acrylic, and mesh. Try looking for industrial suppliers in your area (Try the yellow pages).

    Some trophy stores use Acrylic and you may be able to get some off them.


    -------------------------------------

    Bunnings Warehouse sells some of this material from time to time

    (Australia Wide)


    -------------------------------------

    If are looking for paint either try your local hobby stores such as Hobby Co http://www.hobbyco.com.au/ which has three stores in Sydney.

    (Ships Australia Wide, Three stores in Sydney)

    -------------------------------------

    If you want a large amount of paint. Try automotive stores (Yellow Pages Time).

    -------------------------------------

    You can buy perspex from your local glazier. (Yellow Pages)
    (From Bucko)

    -------------------------------------

    ===International Stores===

    Not a lot of modding stores overseas ship to Australia.

    One store which has good prices and ships internationally including Australia. Is Performance PC's http://www.performance-pcs.com. They have one of the largest range of modding supplies in the world even! I have bought from them. There shipping prices are good value to.

    (Ship to Australia)

    A large number of international ebay sellers are selling all mod ware to Australia. Just remember you are dealing with individuals not companies so don't buy mod ware from Honest Yuri who has a feedback of 1. http://www.ebay.com.au. Also to pay people for your goods you will need to use paypal http://www.paypal.com to pay people securely.

    Hope this helps any fellow Australian modders in there quest to make their case a work of art.
    Need a sig

  2. #2
    Paradox Sausage DaveW's Avatar
    Join Date
    Nov 2005
    Location
    Scotland, UK (NOT England)
    Posts
    5,550

    Default Re: Australian Modding Supplies Guide

    I've stickied this thread Simon, it's great. +Rep.

    Don't know why you locked it though?

    -Dave
    Quote Originally Posted by jdbnsn
    Ideas are just knowledge soaked in alcohol.
    Quote Originally Posted by jdbnsn
    Did I just get in a Volvo? Volvo's don't have guns!

  3. #3
    I come from a land down under. simon275's Avatar
    Join Date
    Jun 2006
    Location
    Sydney, Australia
    Posts
    3,075

    Default Re: Australian Modding Supplies Guide

    If any Aussies out there know of some good stores that sell computer modware just post in here and I will add it to the list.

    (Thread unlocked)
    Need a sig

  4. #4
    I come from a land down under. simon275's Avatar
    Join Date
    Jun 2006
    Location
    Sydney, Australia
    Posts
    3,075

    Default Re: Australian Modding Supplies Guide

    Updates!
    Need a sig

  5. #5
    Austral Alien
    Join Date
    Jan 2007
    Location
    Newcastle, NSW, Australia
    Posts
    2,194

    Default Re: Australian Modding Supplies Guide

    For perspex, also try a glazier. I buy all my from my local glass supplier.
    Quote Originally Posted by Crimson Sky View Post
    hahaha..."Wacky"
    -Wackello Capello

  6. #6
    Fresh Paint
    Join Date
    Jul 2007
    Location
    Perth, Western Australia
    Posts
    26

    Default Re: Australian Modding Supplies Guide

    Hello all,

    Bit new here so hello everyone. CoolPC also sell alot of UV reactive stuff, as well as fans, el wire, fan controllers and other bits and bobs.

    www.coolpc.com.au

    Excellent thread btw was looking for a list of aussie suppliers

    cheers
    Last edited by Sting; 07-24-2007 at 09:20 AM. Reason: forgot to say thankyou :)

  7. #7
    I come from a land down under. simon275's Avatar
    Join Date
    Jun 2006
    Location
    Sydney, Australia
    Posts
    3,075

    Default Re: Australian Modding Supplies Guide

    Cheers for that Sting.

    Added

    +rep
    Need a sig

  8. #8
    Fresh Paint
    Join Date
    Jul 2007
    Location
    Perth, Western Australia
    Posts
    26

    Default Re: Australian Modding Supplies Guide

    hey again everyone,

    Got another one for you Simon, www.gammods.com.au.

    The sell alot of stuff from MNPCTECH as well as some watercooling stuff and those damn sexy Bulgin Switches (thats how i found about about this site).

    They are in Balgowlah Heights, NSW and ship worldwide by the looks of it, but i dont think they have pickup.

    I'm going to be keeping a look out for more site to help with this thread.

    Keep up the good work everyone.

    Cheers

    __________________________________________________
    The HQ08 is finally coming alive

  9. #9
    I come from a land down under. simon275's Avatar
    Join Date
    Jun 2006
    Location
    Sydney, Australia
    Posts
    3,075

    Default Re: Australian Modding Supplies Guide

    That is Awesome Sting you have made my day. I live pretty close to there. I am definably gonna get in contact with these guys. +rep
    Need a sig

  10. #10
    Kittens!! <3 Cymae's Avatar
    Join Date
    Jun 2005
    Location
    Brisbane, Australia
    Posts
    567

    Default Re: Australian Modding Supplies Guide

    PC Case Gear and DSE have failed me for the last time. They're annoying to buy from and their customer service stinks more than poo on a stick.

Similar Threads

  1. Aero's Guide to Modding Part 1- Design
    By Aero in forum General Tips Tricks & Tutorials
    Replies: 16
    Last Post: 11-16-2007, 11:21 AM
  2. Australian Modding Supplies
    By Ronyx in forum Hot Hardware Deals
    Replies: 2
    Last Post: 01-05-2007, 11:37 PM
  3. Aero's Guide to Modding Part 2- Materials
    By Aero in forum The Rookie's Nook
    Replies: 10
    Last Post: 12-29-2006, 04:49 AM
  4. Modding a case - need newbie tips ^^;
    By Nagoshi in forum Modding Q&A
    Replies: 24
    Last Post: 04-12-2006, 04:36 PM
  5. Maximum Pc guide To PC hardware hacking??
    By weirdguy in forum The Chatterbox
    Replies: 6
    Last Post: 10-04-2005, 05:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •