Digital Camouflage is the wave of the future. All the Armed Forces are using it now.
This technique can be used for any color of digi camo.
What you need:
- Basic airbrush set up
- Shelve liner, really cheap at Wal Mart
- Masking Tape
- Primer, White base color, Transparent Black, Transparent White, Blue, and Clear-Coat
Here's the airbrush colors.
First Step. Prepped the mouse by priming, sanding, then I used White spray paint for the base.
Then I used the free-hand stencil I made from the shelve liner, to start airbrushing. But first let's look at how I made the Stencil.
The stencil is just random patterns cut out of the shelf liner. I took care to keep the cuts at the corners of the squares to keep the pattern looking blocked off on all the edges. Then I filled in most of the area with masking tape, once again taking care not to mess up the blocky pattern.
Then I laid down the first 2 colors, Transparent Black, then Grey (made from mixing the Transparent Black and Transparent White).
Then I did one more layer with a Blue Grey color(made from mixing the Transparent Black, Transparent White, and Candy Blue)
Then I clear coated it and viola. Here's how it came out.