Results 1 to 9 of 9

Thread: molex pins & Crimpers - Male & Female

  1. #1
    Fresh Paint
    Join Date
    Jun 2005
    Posts
    2

    Default molex pins & Crimpers - Male & Female

    Hello All,

    I’m new to this forum. I’d like to shorten up some of the leads from my power supply, and I’m looking for a place to buy molex 4 pin connectors, both male and female and the correct crimper. I’m also looking for the 3 pin fan connectors and crimpers. I’ve been on the web and have found the molex site and others but it is a little confusing. Does anyone have a good place that they buy stuff that they can recommend.

    Thanks in advance,

    Brian

  2. #2
    ATX Mental Case
    Join Date
    Jun 2005
    Location
    Pittsburgh, PA
    Posts
    120

    Default Re: molex pins & Crimpers - Male & Female


  3. #3
    Fresh Paint
    Join Date
    Jun 2005
    Posts
    2

    Default Re: molex pins & Crimpers - Male & Female

    Hi Timmer,

    Thanks for the reference to the Xoxide site. I got some stuff from them before and I have my Power Supply decked out in the nice green connectors. However what I'm looking for is the male and female connectors that you find on the wire leads when you take them out of the plastic. The four wires have a conector crimped onto each of them.

    What I'd like to do is trim some of my power supply wires back a bit and crimp on new male and female connectors.

    Thanks again,

    Brian

  4. #4
    Water Cooled Xato's Avatar
    Join Date
    Mar 2005
    Location
    Sydney
    Posts
    611

    Default Re: molex pins & Crimpers - Male & Female

    I see what you mean, thats probly something you are more likely to find at a local electronics store.

  5. #5
    Water Cooled Xato's Avatar
    Join Date
    Mar 2005
    Location
    Sydney
    Posts
    611

    Default Re: molex pins & Crimpers - Male & Female

    What you could do if you like, is cut the wires to the desired length, slide some heatshrink on one side, solder the wires togethor... and heatshrink it for a nice insulated seal. It may look odd, but if you do it right near the molex it wont look too out of place. Cable sleeving would cover it up even better...
    But Recrimping would be the best way to go, if you can find the tools.

  6. #6
    Case Wizard
    Join Date
    Mar 2005
    Location
    In a box w/ highspeed internet
    Posts
    753

    Default Re: molex pins & Crimpers - Male & Female

    You could check out mousers on line catalog and look up molex.. or as stated before

    Local Radioshack

  7. #7
    ATX Mental Case Dgephri's Avatar
    Join Date
    Mar 2005
    Location
    PDX, OR
    Posts
    171

    Default Re: molex pins & Crimpers - Male & Female

    Jameco.com

  8. #8
    Water Cooled
    Join Date
    Mar 2005
    Posts
    742

    Default Re: molex pins & Crimpers - Male & Female

    you wont need male connectors because theres only females on a psu. you can desolder the existing ones, bend the flaps back, cut the wire and solder back, or you can get new ones if you want. http://www.bigfootcomputers.com/Merc...y_Code=600.3.5
    this is what you will need $0.6Cad for a set

  9. #9
    ATX Mental Case
    Join Date
    Nov 2005
    Location
    In the middle of the San Francisco Bay
    Posts
    168

    Default Re: molex pins & Crimpers - Male & Female

    www.frozenCPU.com they have lots of the molex connectors. also if you live in the west there is a store called Fry's Electronics. they have lots of pretty much everything you can find a store at www.frys.com

Similar Threads

  1. Removing Molex Plugs Tutorial
    By gaz_the_chav in forum Electronics
    Replies: 9
    Last Post: 11-18-2006, 11:42 AM
  2. Female Molex Pin Removal with out the tool.
    By specialsteve in forum Electronics
    Replies: 15
    Last Post: 07-16-2005, 03:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •