Please post all your comments and suggestions!!!
Please post all your comments and suggestions!!!
AMD 4000+ 2.4GHz OC'ed 2.71GHz
2GB Dual Patriot DDR400 OC'ed to 502MHz 2CL
ASRock939-Dual SATAII
400GB Seagate SATAII 16MB Cache
EVGA 8800GTS OC'ed 113 BIOS Clock
3DMark03: 25021 (All Default Settings)
3DMark06: 6993 (All Default Settings)
Cuttin' It Close!!!
AMD 4000+ 2.4GHz OC'ed 2.71GHz
2GB Dual Patriot DDR400 OC'ed to 502MHz 2CL
ASRock939-Dual SATAII
400GB Seagate SATAII 16MB Cache
EVGA 8800GTS OC'ed 113 BIOS Clock
3DMark03: 25021 (All Default Settings)
3DMark06: 6993 (All Default Settings)
Nice job so far. Dam it must have been 11 at night when you did your last post in the states. Any way good cutting so far. needs a lot of cleaning up with a file. Hopefully you haven't cut the edge to close but I don't know how thick the metal is from the pictures.
Also who is this we business are you working on the case with a mate?
Need a sig
Well, we lost the screw that held in the cutting blades for the dremmel, so it looks like were done for the night until we can run to walmart in the morning... please stay tuned, because we should get all the holes cut by tomorrow!
AMD 4000+ 2.4GHz OC'ed 2.71GHz
2GB Dual Patriot DDR400 OC'ed to 502MHz 2CL
ASRock939-Dual SATAII
400GB Seagate SATAII 16MB Cache
EVGA 8800GTS OC'ed 113 BIOS Clock
3DMark03: 25021 (All Default Settings)
3DMark06: 6993 (All Default Settings)
yep.. we started at 11:25pm in the states, and were done at 2:28am this morning because we lost the bit... so i figure in about 9 or 10 hours we will start posting again... me and my friend are doing this case together pretty much to just have something to do.... i am still kinda confused on what color fans i should use... i thought since i wont have a side panel, i could just go with black fans all around and throw 4 12" green cold cathodes... but i just don't know....
AMD 4000+ 2.4GHz OC'ed 2.71GHz
2GB Dual Patriot DDR400 OC'ed to 502MHz 2CL
ASRock939-Dual SATAII
400GB Seagate SATAII 16MB Cache
EVGA 8800GTS OC'ed 113 BIOS Clock
3DMark03: 25021 (All Default Settings)
3DMark06: 6993 (All Default Settings)
Again welcome to the forums. A modding team pretty cool. Soo who gets the finished case?
Need a sig
You have the same case as me lol except the front of mines is different . I will be watching this . good job on the cuts you did so far Also welcome to the forums
- Computer-Geek
i get to keep the final product. i am going to swap out my current case for this one when i get it finished. I really want to see how cold i can get my processor and 8800gts without watercooling... i just woke up so it will be about 2 hours from now until we get started again...
AMD 4000+ 2.4GHz OC'ed 2.71GHz
2GB Dual Patriot DDR400 OC'ed to 502MHz 2CL
ASRock939-Dual SATAII
400GB Seagate SATAII 16MB Cache
EVGA 8800GTS OC'ed 113 BIOS Clock
3DMark03: 25021 (All Default Settings)
3DMark06: 6993 (All Default Settings)
Just got back from walmart! Putting on the blades, getting ready to start cuttin!
AMD 4000+ 2.4GHz OC'ed 2.71GHz
2GB Dual Patriot DDR400 OC'ed to 502MHz 2CL
ASRock939-Dual SATAII
400GB Seagate SATAII 16MB Cache
EVGA 8800GTS OC'ed 113 BIOS Clock
3DMark03: 25021 (All Default Settings)
3DMark06: 6993 (All Default Settings)