-
Re: Project: NLM.
And some shots threw the window, this part is just AWESOME, and even better IRL.
The grill with the fan behind… Looks sweet to. I’m going to remove the sticker
Lets have some shot:
Thats it. Hope you liked it. Comments are more than welcome! Btw. I’m not done yet, a lot off details need to be worked out. (also important stuff as hdd and pump ^^)
Last edited by jdbnsn; 02-25-2012 at 03:57 PM.
-
Re: Project: NLM.
Update 23 – HDD Part 1 @ Thursday the 10th April 2007.
Intro
Eh, not much time, so as soon I get some more time I’ll mod the harddisk. I want to cut NLM in the hdd cover, and mount some plexi on it. But we don’t want dust in the harddisk right? So I constructed this “hdd dismount boks” inspired from the spiderman case. In the next update there’ll be some actually modding, just hang on
The funny part
This it the harddisk, a 80gb Maxtor disk.
We’ll need a box, the only one I could find was this one.
My legoooo
Now the case’s ready.
Okay, here’s the top.
Then I cutted some plexi, I want to see what I’m doing
Some marking-up.
Some compass-sawing, and I got this nice hole
I need to fill this, I want absolutely NO dust into the case.
That’s good.
Last edited by jdbnsn; 02-25-2012 at 03:59 PM.
-
-
Re: Project: NLM.
Update 24 – Feets Part 1 - Design @ Friday the 18th April 2007.
Intro
Ey guys! Finally I’ll have some spare time! In this weekend I’ll make the feets! I’ve also been modding on my harddrive, I just want to have everything in the next hdd update (including testing and mounting) so you’ll have to wait a little. Buuut, in the next update I’ll properly bring you a little teaser
Oh back to the feets, I did some sketchup (sorry it’s my first attempt, hope the irl letters will be a little more round )
I have to do 2, one in the front and one in the back. But you’ll see later!
The funny part
The is one of the sides. You can read on the picture, what the holes in top are for.
And here again, just so you can see the letters a little more easy.
This is the other side, as you can see it’s similar to the other side, so you’ll be able to read NLM from both sides
The two black parts will be done in 5-8mm alu (don’t know yet, have to check out the workshop) They are separated by a 5mm thick frosted piece of acryl. It gives a totally thickness on 15-20, and that’s perfect They’ll be about 16-18cm long (don’t know yet, I cant remember the size of the bottom eh)
The plexi will light up, and there be light IN the letters, bet that effect is going to be awesome.
I’ll start on the feets tomorrow, right now I have some English homework to do. Cya later guys
Last edited by jdbnsn; 02-25-2012 at 04:01 PM.
-
-
Re: Project: NLM.
But lets take a look at the case:
And with som light:
The last picture, shows how all the plexi edges will look when I add the leds.
What do you think? Comments are welcome!
Last edited by jdbnsn; 02-25-2012 at 04:05 PM.
-
Re: Project: NLM.
Update 26 – Feets part 3 @ Thursday the 31st May2007.
Intro
Wee, ready with another update! Well, first off, I would really like more light to come out from the holes, so need to mount a cathode under, or fix some leds or so. I’ll find out.
Tomorrow i start soldering leds, we need some light in it right? . I think when the fridge’s in again, the tubing make it look less sqared.
The funny part
All right, here we start, a 50*50mm alu piece.
First thing to do on the alu piece: mill down one of the corners.
Then mill down the fist side!
Last part to mill.
That’s what I’m talking about baby.
Then some cutting.
Done and perfect
This is the way the mounting works, hope you can see the idea The holes fit with the holes in the bottom plate.
Last edited by jdbnsn; 02-25-2012 at 04:06 PM.
-
-
Re: Project: NLM.
That's it. From now of the threat will work as a normal worklog. Still a long way to go, stay tuned
-
Re: Project: NLM.
welcome jegerjon!
i followed this thing over at bit tech...i love this case..youve done a wonderful job on it
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules