Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Help....beep codes?

  1. #1
    Anodized
    Join Date
    Jun 2007
    Location
    MD
    Posts
    62

    Question Help....beep codes?

    ok so i just finished the final build of my pc last night at 1:50 in the morning...i was wondering does any one know what " beep--(aprox 7 sec of silence then) 5 quick sequential beeps" mean for a Award Bios from pheonix technologies..thier site wasent help...i have yet to connect a screen i will do that tonight...i just wanted to get the word out there so yea...please help im an uber nub...


    "Live your life well, for it will be short"
    -Unknown..

  2. #2
    Keepin' it Metal .Maleficus.'s Avatar
    Join Date
    Jun 2006
    Location
    The Dairy State...
    Posts
    3,347

    Default Re: Help....beep codes?

    RIP Bucko

  3. #3
    KinderGarden for OS slytherock's Avatar
    Join Date
    Nov 2006
    Location
    Montréal
    Posts
    1,383

    Default Re: Help....beep codes?


    Anyone who think a computer is sexy need to #$? and fast

  4. #4
    Anodized
    Join Date
    Jun 2007
    Location
    MD
    Posts
    62

    Default Re: Help....beep codes?

    yea i had foudn that too maleficus...but in the past bouple of years awardand pheonix merged so now is award bios by pheonix technoligies


    "Live your life well, for it will be short"
    -Unknown..

  5. #5
    Anodized
    Join Date
    Jun 2007
    Location
    MD
    Posts
    62

    Default Re: Help....beep codes?

    by memory error do u think it bad ram or error in installation


    "Live your life well, for it will be short"
    -Unknown..

  6. #6
    KinderGarden for OS slytherock's Avatar
    Join Date
    Nov 2006
    Location
    Montréal
    Posts
    1,383

    Default Re: Help....beep codes?

    Can be one or the other...
    award bios by pheonix
    Quote Originally Posted by Award Bios website
    Beep Codes

    *

    The only AwardBIOS beep code indicates that a video error has occurred and the BIOS cannot initialize the video screen to display any additional information. This beep code consists of a single long beep followed by two short beeps. Any other beeps are probably a RAM (Random Access Memory) problems.

    Anyone who think a computer is sexy need to #$? and fast

  7. #7
    Anodized
    Join Date
    Jun 2007
    Location
    MD
    Posts
    62

    Default Re: Help....beep codes?

    Quote Originally Posted by slytherock View Post
    Can be one or the other...
    award bios by pheonix
    sigh...i hope when i get home today its as simple as removing the RAM and putting it back in....when i installed it i followed the instructions of magazines, my book on build a pc, and the mobo manual...i opened the white tab things on the side lined up the mem and pushed down (i had aligned it with the key thing) it took a good amount of force...is that normal...li was using cosair XMS RAM?


    "Live your life well, for it will be short"
    -Unknown..

  8. #8
    Keepin' it Metal .Maleficus.'s Avatar
    Join Date
    Jun 2006
    Location
    The Dairy State...
    Posts
    3,347

    Default Re: Help....beep codes?

    Yep, that's normal. For me anyways. Unless you did something wrong putting the RAM in, you probably have a dead stick
    RIP Bucko

  9. #9

    Default Re: Help....beep codes?

    It shouldn't take too much force, of you had problems getting both sides to click in, check your key again.
    If you can boot past the beep codes, download memtest86 and test your ram to make sure it's good.

  10. #10
    Anodized
    Join Date
    Jun 2007
    Location
    MD
    Posts
    62

    Default Re: Help....beep codes?

    cool ill try that when I bring my monitor down...jw, maleficus so if i have a bad stick (i bought them in pair) do you know if corsair warentys usually cover bad sticks???


    "Live your life well, for it will be short"
    -Unknown..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •