Water Alien Rebirth - From Brazil

[pedrofilho]

Front panel hinges removing:

yours,

Pedro Torres.

[pedrofilho]

I´ve ordered the coolermaster musketeer 3 black, it´s pretty beautifull, take a look:

Olha ela aí...

See you soon,

Pedro Torres.

[Spawn-Inc]

looks nice. is that a vacuum tube?! how much does one of those go for?

[pedrofilho]

looks nice. is that a vacuum tube?! how much does one of those go for?

It´s about 40.00 usd. The vacuum tube is vintage kind and will compose the front panel acessories, adding sound fuctionality to it.

This valve works as an attenuator and have lower power cosumition.

It will close the black-hole left behind by the old DVD-RW which is broked.

See you soon,

Pedro Torres.

[pedrofilho]

As the alien movemet appears around 20´s with relativity theory from Einstein, i decided to put some vintage stuff on this case and do a sephia, black and white, paint job.

Tomorrow i´ll place two more leds do iluminate de top alien, as it is today:

Yours,

Pedro Torres.

[pedrofilho]

Started the air reservoir to the airbrush:

Tomorrow i´ll put the air valve on the botton and if everything works i´ll do the texture of the oposite side and start to paint the case

See you soon,

Pedro Torres.

[Spawn-Inc]

wow... nicely done. +rep i was going to say i hope it can hold the pressure but your using a tire pump. i use an air compresser at 110+psi

[pedrofilho]

wow... nicely done. +rep i was going to say i hope it can hold the pressure but your using a tire pump. i use an air compresser at 110+psi

Yes, i am using a tyre pump today i removed the old hose witch was broked in last attempt to use it for painting purposes.

Also, i did the hole on the bottlom of the bottle and tomorrow i´ll put the car kind valve.

Thank you for your nicely coment !

Watch this:

See you !

Pedro Torres.

[Airbozo]

wow... nicely done. +rep i was going to say i hope it can hold the pressure but your using a tire pump. i use an air compresser at 110+psi

You use 110 psi? My air brush is only rated at 50?!?! (never used this airbrush yet, it was a gift...)


BTW, Intrigued by this so +rep!

[pedrofilho]

You use 110 psi? My air brush is only rated at 50?!?! (never used this airbrush yet, it was a gift...)


BTW, Intrigued by this so +rep!

Mine works up 55psi. This reservoir i´ll give a continuous flux of air without the oscilations from pump.

Last time i used it the hose of pump do not supported the pression and blows, for this reason, tomorrow i´ll change the hose for another more resistent.

Thanks for your visit and nice coments.

Best regards,

Pedro Torres.