Battlefield 2 L.A.N. PC.

[danthegeek]

I have a sketchup for the top panel and lid configuration

The speakers are to the right and a storage panel for wires to the left

A closer look at the panel

And a closer look at the logo for the top. The part in white will be cut out of the top piece and frosted plexi will be added. I will use white leds to make it glow.

Thanks again

[mercerman318]

its supposed to be "due" not "do". The Design looks great though, good work

[dfigravity]

Originally Posted by danthegeek

The part in white will be cut out of the top piece and frosted plexi will be added. I will use white leds to make it glow.

And the great ideas keep coming...I love this mod.

[thehilitereel]

With the C4 trigger, you added the Spec-Ops kit to the case, throw in a Medic emblem on the side somewhere?

[Drum Thumper]

Originally Posted by thehilitereel

With the C4 trigger, you added the Spec-Ops kit to the case, throw in a Medic emblem on the side somewhere?

Sorry, had to do this:

Greatest. Show. Ever.

/end hijack.

Seriously, I second the medic symbol.

[danthegeek]

Well I did a little bit of work on the case today. I did have to stop when the drill slipped and I cut my finger to the bone. But anyways some pics are what you guys want so here you go.

I mounted some 90 degree angled aluminum on the inner part of the case for some support and for the top panel to have a place to mount to.

Heres an overall picture of the case so far.

On the front panel you can see were I cracked the bondo from moving the face plate back. It wasnt straight enough and a little more bondo will have it looking pretty again.

I bet you cant guess how many rivets are in this case so far.


The answer is : 42 and im not done yet. . I still have to rivet the hinges, latches, MB tray, hard drive cage, DVD rom cage, etc. Uhh

Anyway, I took the idea you guys thew in into consideration. But instead of having just the one class I came up with this.

This panel will display the overall kills and deaths for all of the classes in my account. I will just have to find an LCD and someone who can program very well. If not Ill just paint the current stats when the case is almost finished.

[chaksq]

Originally Posted by danthegeek

I did have to stop when the drill slipped and I cut my finger to the bone.

Ouch that sounds painful, are you allright?

The case is looking very good right now!

[elbarto241]

wow, sketchup models are looking LEET!
hope you didnt hurt yourself 2 badd with that drill?
how did it happen?i dont c how u can hurt yourself drilling unless your in an awkward position.....

[danthegeek]

Im ok now that I took some good pain killer. It happened when I was drilling out a rivet on a 90 degree steel bracket. I didnt have enough room for pliers so I used my hand . I didnt have my hand over the rivet, just next to it but, the drill poped through the hole because I was using to much pressure and I hit My hand at full speed. Thats an 18 volt Dewalt as fast as it will spin. So I hit my middle finger and I started oozing blood. Dumb me, I wiped it off on my pants and wrapped it in masking tape so i could keep working. After about an hour the tape was soaked a dripping and I had blood everywhere. So I got some peroxide and cleaned it out. Thats when i noticed I went to the bone, I could see my insides, and I think I cut the tendon because I cant bend it well. Oh well, just anther story.

[Omega]

I want pictures of your finger.