[Project] Modularis Evolution - it begins... updated daily!!

[x06jsp]

are you using split-loom or regular casing? also, see if theres an alternative to the molex connectors thats smaller and less noticable, to help keep things clean :)

I will be using tubing so it is fully encased but i may have to split it down the back so its unnoticeable.

And im not sure what else i would use really i think ill just stick with molexs so i dont have to buy anything else :D


Josh

[x06jsp]

Well as i said i am back with another update :D

and i started by marking up the acrylic to cut the acrylic accents
http://i88.photobucket.com/albums/k173/jingerjosh/modular321.jpg

and cut them
http://i88.photobucket.com/albums/k173/jingerjosh/modular319.jpg

and then got to sanding and polishing them
http://i88.photobucket.com/albums/k173/jingerjosh/modular320.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular322.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular323.jpg

i didnt have time to do the fourth one so i will do that tomorrow and get them mounted so that i have finished another module :D

Josh

[DonT-FeaR]

nice...

good luck man im loving this case so far..

[The boy 4rm oz]

How many of the modules have you made now?

[x06jsp]

nice...

good luck man im loving this case so far..

Thanks mate


How many of the modules have you made now?

I have completed the motherboard module, the dvd module, the hdd module and am very near to finishing the psu module and then i will be finishing off the rad module then the pump/res module (i cant finish it yet as i dont have the money to buy the res i want....

then i just have to make all the supports and join it all together and then off to paint it goes :D

Josh

[The boy 4rm oz]

So only 2 and a bit left to go. fantastic work.

[DonT-FeaR]

nice... love it

[x06jsp]

So only 2 and a bit left to go. fantastic work.

Yep :D

Josh

[x06jsp]

Hey guys update time :D

I got the last bit of acrylic for the psu housing polished
http://i88.photobucket.com/albums/k173/jingerjosh/modular324.jpg

I then got them all mounted
http://i88.photobucket.com/albums/k173/jingerjosh/modular325.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular326.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular327.jpg

All my completed modules so far
http://i88.photobucket.com/albums/k173/jingerjosh/modular328.jpg

I then got the other bits of acrylic for the rad housing polished up
http://i88.photobucket.com/albums/k173/jingerjosh/modular329.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular330.jpg

And mounted
http://i88.photobucket.com/albums/k173/jingerjosh/modular331.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular332.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular333.jpg

Tomorrow i will be making and mounting the front and back of the rad housing.

Josh

[The boy 4rm oz]

The modules look really good stacked together.

[DonT-FeaR]

yeah looks great man nice work

[x06jsp]

The modules look really good stacked together.


yeah looks great man nice work

Thanks guys :D

Josh

[XcOM]

man i would hate to try and lift that when its full of water!

looking sweet dude

[x06jsp]

Lol yer its gunna be very very heavy when all the water is in there ....

Thanks

Josh

[p0Pe]

think i missed it, but did you plan to actually modulize the different modules so that you could take f.x the hdd module of? and connect it again fairly easyally?:D

[The boy 4rm oz]

Yeah the whole thing will come apart into the seperate modules.

[SXRguyinMA]

this thing gets better and better!

[x06jsp]

Thanks Guys and yer the modules could come apart after unscrewing the supports but i wouldnt ever need to really...

There should be another medium - large update this eve

(including a decorative knife/letter opener that i got bored and started making )

Josh

[p0Pe]

how are you gonna seperate the watercooling sections? by quick connectors?

[x06jsp]

I will hopefully be making a junction that will be able to be shut off so i can remove diff parts of the loop its hard to describe so you will just have to wait and see if i do it... lol

Josh

[p0Pe]

as loong as you dont use thoose quick connectors:P they will kill your flow

you can see what i mean in this vid:

http://tosed.dk/billeder/DnA/flowtest/DnA.rar

[x06jsp]

Well im back for another update :D

I started off today by cutting new front and back end pieces for the rad housing
http://i88.photobucket.com/albums/k173/jingerjosh/modular334.jpg

I then got them mounted up
http://i88.photobucket.com/albums/k173/jingerjosh/modular335.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular336.jpg

And then i grabbed some mesh and cut it to size
http://i88.photobucket.com/albums/k173/jingerjosh/modular337.jpg

I then marked the hole i need to make on the rad housing
http://i88.photobucket.com/albums/k173/jingerjosh/modular338.jpg

Took it apart
http://i88.photobucket.com/albums/k173/jingerjosh/modular339.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular340.jpg

and then cut
http://i88.photobucket.com/albums/k173/jingerjosh/modular347.jpg

I still need to file that down so i will get that done first thing monday morning :D

And i also got a bit bored so i decided to start on a decorative dagger thing (it wont be used as a dagger!)
Initial cut
http://i88.photobucket.com/albums/k173/jingerjosh/modular342.jpg
I then started to give it a bit of a sharpen (note i wont be able to sharpen this properly as it is alu not anything like stainless steel allthough i am thinking of buying some so i can make a proper dagger of my own :D

How it is held
http://i88.photobucket.com/albums/k173/jingerjosh/modular344.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular345.jpg

I will probably cut 2 bits of black acrylic to put either side of the handle aswell

And thats it for today :D

Josh

[The boy 4rm oz]

Put a pump in every module lol, will save your flow problem haha.

Rad box looks great. Also that knife is cool, I should try it myself some day.

[mittelmeier]

Your case is coming along nicely. And the knife/letter opener is a cool idea. +rep.

[x06jsp]

Put a pump in every module lol, will save your flow problem haha.

Rad box looks great. Also that knife is cool, I should try it myself some day.

Thanks mate i will hopefully be buying some decent stainless steel so that i can make some better daggers :D


Your case is coming along nicely. And the knife/letter opener is a cool idea. +rep.

Thanks mate :D

[DonT-FeaR]

letter opener.... you get bored to ey??? lol make a real knife from an old file, be sharp as and really strong.... nice work tho

[x06jsp]

letter opener.... you get bored to ey??? lol make a real knife from an old file, be sharp as and really strong.... nice work tho

Lol nah im buying some stainless steel at some point :D and using that instead

Josh

[DonT-FeaR]

ah ok what evah :) i just know that files are good....

[x06jsp]

lol yer im sure they are :D

Ill have another update tonight hopefully :D

Josh

[THRASHER2]

Bring on the updates :banana:

[DonT-FeaR]

yea agreed

[x06jsp]

Bring on the updates :banana:

lol i will have one later :D

Josh

[DonT-FeaR]

waiting...

[x06jsp]

Ok midday update :D there may be an update later but i dont know yet

i started where i left off last week and filed down the cutout on the rad housing
http://i88.photobucket.com/albums/k173/jingerjosh/modular348.jpg

and then i mounted the mesh so that the rad housing is finished apart from the struts for the rad
http://i88.photobucket.com/albums/k173/jingerjosh/modular349.jpg

I then took a break to bake this for my family its an apple crumble :D i love em that will be devoured tonight after tea
http://i88.photobucket.com/albums/k173/jingerjosh/modular350.jpg

i then moved on to the pump housing and got the front mounts mounted to the module
http://i88.photobucket.com/albums/k173/jingerjosh/modular351.jpg

then i fitted the front
http://i88.photobucket.com/albums/k173/jingerjosh/modular352.jpg

then i mounted the back
http://i88.photobucket.com/albums/k173/jingerjosh/modular353.jpg

finished
http://i88.photobucket.com/albums/k173/jingerjosh/modular354.jpg

the only bits i have to do on the modules is cut the cable management and the tubing holes and then on the pump/res housing i have to cut the front panel for the res im using but i cant do that yet as i cant afford the res... buttttt that is it and other than that i just have to make supports :D

so im nearly there now
Josh

[The boy 4rm oz]

You should try making your own res mate, your good with the plastics. Coming together really well.

[x06jsp]

yer but im using an aqua tube and i dont have the machinery to work on a nice thick tubular res :D

Thanks

[DonT-FeaR]

ok that was a cool update except the apple crumble bit... there goes ya man hood lol jokes.... food is always good....

[x06jsp]

LOL apple crumble is amazing :D

Thanks

[rendermandan]

Hope you baked enough to share!

[SXRguyinMA]

lookin nice :up:

[x06jsp]

Hope you baked enough to share!

Lol yer just for my family though :D


lookin nice :up:

Thanks mate :D

And i have cut 25 of the 56 rectangles of black acrylic that i need for the 14 supports so i will try and get the rest done tomorrow and maybe some of the 42 green bits :D then all i neeed to do is glue them and shape it and then bolt it together then i just need some money for the watercooling parts and a switch :D then i can get it painted and finished :up

Josh

[The boy 4rm oz]

Awesome, can't wait to see those feet made. It's gonna take you a while lol.

[DonT-FeaR]

oh god...

42 and 56 pieces... = 98 - 25 = 73... have fun.... and have a few breaks or you will get a painfull cramp...

[mittelmeier]

Looking good. That's a ton of pieces left to cut, no doubt they'll look great when there done.

[x06jsp]

Awesome, can't wait to see those feet made. It's gonna take you a while lol.

Lol a little while :D thanks


oh god...

42 and 56 pieces... = 98 - 25 = 73... have fun.... and have a few breaks or you will get a painfull cramp...

Lol yer a lot and then i have to angle all of them on both sides then glue then sand then polish so a while


Looking good. That's a ton of pieces left to cut, no doubt they'll look great when there done.

lol yer hopefully :D

Josh

[DonT-FeaR]

Good luck and gods speed :)

[x06jsp]

Ok well on with todays update :D

I started this yesterday but hey,

I started off by getting out my tile cutter
http://i88.photobucket.com/albums/k173/jingerjosh/modular355.jpg

and attempting to cut the acrylic straight it didnt really work
http://i88.photobucket.com/albums/k173/jingerjosh/modular356.jpg

So i then used the score and snap technique that i learned from syrillian and its very very effective
http://i88.photobucket.com/albums/k173/jingerjosh/modular357.jpg

So i was quickly able to do these yesterday
http://i88.photobucket.com/albums/k173/jingerjosh/modular358.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular359.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular360.jpg

Then this morning i got the rest of the 56 black pieces done :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular361.jpg

so now i just need to do the 42 green bits and then i will be ready to start the proper work on them :D

Josh

[DonT-FeaR]

gees... thats alot of plastic... i should really learn that technique...

i think i know it but...


good work

[The boy 4rm oz]

Now that's a lot of plexi.

[x06jsp]

gees... thats alot of plastic... i should really learn that technique...

i think i know it but...


good work

Thanks all you need to do is take a stanley knife or something similar (i used a chisel as i couldnt find my stanley :D

measure where you need to cut then use the ruler as a guide along the line for the first few goes (go lighter to start with) then go over it quite a lot and when you have a relatively deep groove (i think mine were about 0.5-1mm deep on 3mm bits you will need a bit more for 5mm up) then place the main bit of plexi on a table or bench or whatever hold that down (line it up so that the score line is right up on the edge) then push down quite hard on the smaller bit you are breaking off and there you go sometimes it needs quite a bit of force :D

Hope this helps


Now that's a lot of plexi.

Lol well i have used nearly a hole sheet of black acrylic on this case so far (100cmx60cm :D lol)

and by the time i have done all the green i will have used 1.5 sheets of that :D

Josh

[The boy 4rm oz]

Lol well i have used nearly a hole sheet of black acrylic on this case so far (100cmx60cm :D lol)

and by the time i have done all the green i will have used 1.5 sheets of that :D


Now that's a lot of weight lol.

[x06jsp]

Now that's a lot of weight lol.

Lol yer :D

Josh

[x06jsp]

Very very small update today

i bassically only got just over an hour to do work soooo i managed to get 24 out of the 42 bits of green cut out (enough for 8 of the 14 supports) so here are the 2 photos the second is all the bits to make up 8 of the supports just thought i would show how much acrylic there is there lol
http://i88.photobucket.com/albums/k173/jingerjosh/modular362.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular363.jpg

Thats it for today i will get the rest cut tomorrow morning and then start gluing :D

Josh

[The boy 4rm oz]

Just one question, I dunno if you have mentioned it before. What thickness is the plexi you are using?

[x06jsp]

Just one question, I dunno if you have mentioned it before. What thickness is the plexi you are using?

Its 3mm thick mate :up:

Josh

[The boy 4rm oz]

Thanks. I thought it looked a bit thinner than the stuff I am using. I wish I had 3mm but the school only had 4mm, well most of it was 4mm.

[x06jsp]

Yer 3mm is good for this kinda stuff :D

[x06jsp]

Woop midday update guys :D

i started out by cutting the rest of the green pieces and ended with this
http://i88.photobucket.com/albums/k173/jingerjosh/modular364.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular365.jpg

And i have just started gluing bits together to make the supports
http://i88.photobucket.com/albums/k173/jingerjosh/modular366.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular367.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular369.jpg

Thats it so far i will be gluing more after ive eaten but i will show you how many i get done :D

Josh

[The boy 4rm oz]

I admire the amount of effort you put into your plexi work.

[x06jsp]

Thanks mate :D

Josh

[x06jsp]

Ok well here is the rest of the update :D

I continued gluing...
http://i88.photobucket.com/albums/k173/jingerjosh/modular370.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular371.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular372.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular373.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular374.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular375.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular376.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular377.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular378.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular379.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular380.jpg
That there is 1.5 hours worth of gluing :D lol fun day!

and this is roughly how they will be arranged :D
psu+hdd
http://i88.photobucket.com/albums/k173/jingerjosh/modular381.jpg
Rad on top of pump/res
http://i88.photobucket.com/albums/k173/jingerjosh/modular382.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular383.jpg

hdd on top of psu again :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular384.jpg

and thats it for today. ill be back next week to do more

Josh

[The boy 4rm oz]

Cool, feet for everyone. I like how the modules "balance" on the feet, really unusual.

[x06jsp]

Thanks mate :D

josh

[Chaos Theory]

then i mounted the back
http://i88.photobucket.com/albums/k173/jingerjosh/modular353.jpg


I've got that drill too:D
It's awesome 8)
Works way better then most drills they sell these days.

Great Mod BTW!

[grevaeg]

Great job this far dude, looking awesome ^^

God... would have had a psychic breakdown if i had to cut so many similar pieces of plexi...

[x06jsp]

Thanks guys :D

Josh

[x06jsp]

Hey guys im back with another update :D

I decided this morning that i would make the supports a bit simpler so i am not drilling holes in them and they are a slightly different shape but it like it and it means that i can just about cut them on my scroll saw then i just need to use my belt sander to flatten them down

http://i88.photobucket.com/albums/k173/jingerjosh/modular385.jpg

http://i88.photobucket.com/albums/k173/jingerjosh/modular386.jpg

and then i got them polished (ill get better macro shots another day
http://i88.photobucket.com/albums/k173/jingerjosh/modular387.jpg

i then drilled and tapped them.
http://i88.photobucket.com/albums/k173/jingerjosh/modular388.jpg

attached the first
http://i88.photobucket.com/albums/k173/jingerjosh/modular389.jpg

And the rest
http://i88.photobucket.com/albums/k173/jingerjosh/modular390.jpg

Then after a while i had this done :D rad,pump/res and mobo
http://i88.photobucket.com/albums/k173/jingerjosh/modular391.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular392.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular393.jpg

Thats it for today so i will hopefully get at least the next four done tomorrow and i hope to have these supports completed by thurs then i need to make the support that runs between the rad and hdd housings to hold the dvd housing.
then i need to wait for money so that i can buy my cable management stuff then i just need to get it painted and its done :D

Josh

[The boy 4rm oz]

This is looking sooooo good, keep up the excellent work mate.

[x06jsp]

Thanks mate :D

Josh

[x06jsp]

Hey guys well i have got the hdd mounted to the psu housing :D

support before polishing after sanding
http://i88.photobucket.com/albums/k173/jingerjosh/modular395.jpg

and polished
http://i88.photobucket.com/albums/k173/jingerjosh/modular394.jpg

Attached to the psu housing
http://i88.photobucket.com/albums/k173/jingerjosh/modular396.jpg

And attached to the hdd housing :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular397.jpg

so there we have it all i have left for these supports is putting feet on the psu housing and then joining that double section to the rest of it then i just have to make the supports for the dvd housing then all fabrication is done :D :D

And i maybe be able to buy some of the stuff for cable management this week/next week

Josh

[The boy 4rm oz]

I am really looking forward to seeing this completed.

[x06jsp]

Thanks mate :D and it shouldnt be too long depending on money :D

Josh

[mittelmeier]

Looking good. I can't wait to see it all assembled either. + rep for all the fab work.

[x06jsp]

Looking good. I can't wait to see it all assembled either. + rep for all the fab work.

Thanks mate :D

Neither can i.

Unfortunately i wont have the supports finished on thursday as i have got a full spinal mri scan on that day so ill have it finished on friday.

josh

[x06jsp]

Well guys im back with yet another update :D

So i got the four supports that will be the feet of the psu housing :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular400.jpg

http://i88.photobucket.com/albums/k173/jingerjosh/modular401.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular402.jpg

Marking out where i want them to go
http://i88.photobucket.com/albums/k173/jingerjosh/modular403.jpg

Mounted
http://i88.photobucket.com/albums/k173/jingerjosh/modular404.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular405.jpg

This is how far i am now the only bits i need to join are the supports between the psu and the mobo :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular406.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular407.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular408.jpg

and i had a bit more time soooooo i cut and polished the supports that will be going between the psu and mobo :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular409.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular410.jpg

And i will mount them on friday.

Josh

[The boy 4rm oz]

Almost all done now. You have come a very long way in a very small amount of time. Excellent work.

[x06jsp]

Thanks mate :D but there is still alot to buy :D but yer its been quite quick for such a huge project :D

Josh

[SXRguyinMA]

lovin it! :up:

[x06jsp]

Thanks mate :D

Josh

[Yeticorn]

I've actually been silently following since day one as a guest of this lovely forum, and I must say that I am impressed with the origonality and the professional effeciency of the project. Well done!

[x06jsp]

Thanks for the comment Yeticorn and im honoured that you joined to post this comment :D

Josh

[Yeticorn]

No prob, I can't wait to post pics of my own project once school slows down. In the mean time, I'll keep an eye on this thread :D
/sub

[x06jsp]

Thanks and i look forward to seeing your project :D

Josh

[DonT-FeaR]

just the motherboard module alone will turn heads wanna make me one? lolvery nice

[x06jsp]

Lol ill make anyone bits as long as they pay :D

Thanks mate

Josh

[pheany]

That thing looks amazing. You definately have done a great job sticking to the original design. Cant wait to see it in action :-)

[DonT-FeaR]

how much??? a module...

[x06jsp]

That thing looks amazing. You definately have done a great job sticking to the original design. Cant wait to see it in action :-)

Thanks mate :D good to see i have managed to get another member to join and post :up:


how much??? a module...

Pm me and we can work something out...

Josh

[x06jsp]

Well guys another update and its a goodun :D

All the last acrylis supports drilled
http://i88.photobucket.com/albums/k173/jingerjosh/modular411.jpg

and secured to the mobo housing
http://i88.photobucket.com/albums/k173/jingerjosh/modular412.jpg

and then secured to the psu housing :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular413.jpg

then i polished up another rectangle of acrylic
http://i88.photobucket.com/albums/k173/jingerjosh/modular414.jpg

and cut the rod of arylic i had into two
http://i88.photobucket.com/albums/k173/jingerjosh/modular415.jpg

and then secured together along with a bit of alu angle
http://i88.photobucket.com/albums/k173/jingerjosh/modular416.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular417.jpg

and attached to the hdd housing
http://i88.photobucket.com/albums/k173/jingerjosh/modular418.jpg

angle and acrylic then attached to the rad housing
http://i88.photobucket.com/albums/k173/jingerjosh/modular419.jpg

woop
http://i88.photobucket.com/albums/k173/jingerjosh/modular420.jpg

then layout
http://i88.photobucket.com/albums/k173/jingerjosh/modular421.jpg

and secured
http://i88.photobucket.com/albums/k173/jingerjosh/modular422.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular423.jpg

and i can just about lift it!! lol its heavy and i have to get a board for it to sit on so i will barely be able to lift the case alone when its done lol!

Now there really is only wiring and painting to do :D

Hope you like this update i know i do!

Josh

[The boy 4rm oz]

I must say that looks bloody beautiful. Yeah it looks heavy lol. My guessing is 25-30kg for the entire thing empty. When it's on the board, painted and full of hardware and water cooling gear it will probably be around 50kg lol. I think you may win the award for the heaviest PC on the forum lol.

[x06jsp]

lol i dont think its quite that heavy its just cus its bulky aswell :D

josh

[SXRguyinMA]

simply beautiful :up:

[x06jsp]

Thanks mate :D

[mittelmeier]

That's awesome. +rep

[x06jsp]

Thanks :D and rep back at ya :up:

Josh

[DonT-FeaR]

wow.... thats like this coolll 8 (turn on side)

[p0Pe]

I think you may win the award for the heaviest PC on the forum lol.

i would think that the dude that build a case out of granite(?) (stone lol) would beat that:D

i barely cant lift my case too.. and thats 35 kilo:P

looking awsome btw dude! really cant wait to see the whole thing painted and wired. hope you will do as nice a job on the wirering as you´ve done on the case itself!

[The boy 4rm oz]

True. I forgot about the granite case lol.

[SXRguyinMA]

yea that granite case was a monster, although my armor with LCS is pretty damn heavy too!

[x06jsp]

Thanks for all the posts guys :D and yer i saw that granite case on another forum and it was ridiculously heavy :D

Josh

[DonT-FeaR]

ive never seen that one!?!??!?!


good work josh

[Yeticorn]

Superb idea and execution! Still subscribed and can't wait to see what this thing is gonna look like when it's all painted up and ready for action.

[x06jsp]

Thanks guys :D

Josh

[SXRguyinMA]

ive never seen that one!?!??!?!


good work josh

here ya go then :D

http://www.thebestcasescenario.com/forum/showthread.php?t=12059

[DonT-FeaR]

kool thanks ill read it now...

[x06jsp]

Hey look more room :D (it looks like there is less than there is in the pic trust me there is more :D)
http://i88.photobucket.com/albums/k173/jingerjosh/modular424.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular425.jpg

And i dont need to buy a board anymore my dad found me one Just gotta chop it a bit.
http://i88.photobucket.com/albums/k173/jingerjosh/modular427.jpg

my p4 extension cable
http://i88.photobucket.com/albums/k173/jingerjosh/modular428.jpg

I then drilled the hole for my power button that i havent been able to buy yet
http://i88.photobucket.com/albums/k173/jingerjosh/modular429.jpg

and i made up a mounting plate
http://i88.photobucket.com/albums/k173/jingerjosh/modular430.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular431.jpg

And then i tried out my thinner cable with a normal molex extension (not very pretty but it works :D)
http://i88.photobucket.com/albums/k173/jingerjosh/modular432.jpg

Josh

[The boy 4rm oz]

You better be getting a green ring bulgin switch lol. That would look sweet.

[x06jsp]

Lol yer im getting a black switch with green ring :D

Josh

[x06jsp]

Another small update :D

i cut out 2 rectangles of black acrylic
http://i88.photobucket.com/albums/k173/jingerjosh/modular433.jpg

Polished
http://i88.photobucket.com/albums/k173/jingerjosh/modular433.jpg

and then put one with the green its going with
http://i88.photobucket.com/albums/k173/jingerjosh/modular435.jpg

it needed a bit of filing down to be uniform
http://i88.photobucket.com/albums/k173/jingerjosh/modular436.jpg

and in place:D
http://i88.photobucket.com/albums/k173/jingerjosh/modular437.jpg

I got started on the second one and i just need to polish it up now and i will show that one installed tomorrow :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular438.jpg

Hope you liked it

Josh

[rendermandan]

dude your steeling all my ideas.

LOL, Looks great though.

but seriously, stop steeling my ideas. :)

[SXRguyinMA]

lookin wonderful man!

[Yeticorn]

Still diggin' it, still following. Nice touch with the acrylic on the supports there.

[DonT-FeaR]

yea sweet touch looks like 30% better...?? 100% :)

[The boy 4rm oz]

The devil is in the details my friend.

[x06jsp]

dude your steeling all my ideas.

LOL, Looks great though.

but seriously, stop steeling my ideas. :)

Lol no idea stealing here :think: and thanks :D


lookin wonderful man!

Thank you :up:


Still diggin' it, still following. Nice touch with the acrylic on the supports there.

Thanks :D


yea sweet touch looks like 30% better...?? 100% :)


The devil is in the details my friend.

Thanks guys :D and yer i was thinking i wanted to just set the small details apart from other mods :up:

more later on.

Josh

[x06jsp]

On with the next update :D

i got the second support for the dvd housing polished up
http://i88.photobucket.com/albums/k173/jingerjosh/modular439.jpg

and mounted
http://i88.photobucket.com/albums/k173/jingerjosh/modular442.jpg

i then measured the bits of cable i will need going from the psu housing with string this isnt all of the cables either and it is about 7 meters worth of cable (which means i need nearly that of tubing for just these bits...i have ordered 4! lol)
http://i88.photobucket.com/albums/k173/jingerjosh/modular440.jpg

p4 cable extended to 1.13m (tested aswell :D)
http://i88.photobucket.com/albums/k173/jingerjosh/modular441.jpg

and sleeved
http://i88.photobucket.com/albums/k173/jingerjosh/modular443.jpg

Thats it so far :D

Josh

[SXRguyinMA]

keep it up :up:

[The boy 4rm oz]

So it begins lol. You have lots of cabling to do lol.

[x06jsp]

Thanks guys :D

and yer quite a lot!

[Yeticorn]

Good luck gettin them wires in order and of course stealthed and lookin pretty. I wouldn't want that job. XD

[x06jsp]

Thanks mate and it gives me something to do during the day so its all good :D

Josh

[DonT-FeaR]

yea... i kinda find it relaxing..... until it doesnt work...

[x06jsp]

Lol yer that and the fact that i dont have a decent proper job lol i do 2 hours cleaning every evening at my old college and thats it!

Josh

[x06jsp]

Well on with yet another update :D

I took on board some suggestions about making the mounting plate of the dvd drive smaller and got on with that today.

First i had to cut some longer bolts to go in place of shorter ones that were holding the green and black bits to the rods as the short ones were now too short. and i removed the protective wrapping that was on the rods
http://i88.photobucket.com/albums/k173/jingerjosh/modular444.jpg

I then shortened one side of the dvd mount
http://i88.photobucket.com/albums/k173/jingerjosh/modular445.jpg

And then i did the other one and mounted the dvd housing notice how now you can hardly see the mounts compared to the massive sheet :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular446.jpg

I then removed the protective bits that were on the mounts
http://i88.photobucket.com/albums/k173/jingerjosh/modular448.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular449.jpg

My tubing hasnt arrived today so hopefully it will arrive tomorrow....

And thats it :D

Josh

[The boy 4rm oz]

That mounting system looks really good. From a distance it looks like the module is floating above the rest of them, cool.

[x06jsp]

Thanks mate and yer that was the idea :D

Josh

[p0Pe]

why not use green acrylic to the mount underneath the feats of the cd rom module? IMO that would look cooler than transparrent:D

[DonT-FeaR]

yea i was thinking that but its his choice :)

[The boy 4rm oz]

Making them green would ruin the whole "floating" module theme that he is trying to create.

[mittelmeier]

That's looking great. Using green would look good in the light imo but the clear will look amazing in the dark with the case lights on. Can't wait to see the next update.

[DonT-FeaR]

yea i reckon hey.... gunna be sweet

[x06jsp]

why not use green acrylic to the mount underneath the feats of the cd rom module? IMO that would look cooler than transparrent:D


yea i was thinking that but its his choice :)


Making them green would ruin the whole "floating" module theme that he is trying to create.

Theboyfromoz has got it perfectly right :up: i wanted to use clear so it looks more like its floating :D


That's looking great. Using green would look good in the light imo but the clear will look amazing in the dark with the case lights on. Can't wait to see the next update.

Thanks :D

yea i reckon hey.... gunna be sweet

Yer it will be sweet :D lol


Josh

[DonT-FeaR]

yea i didnt realise that....

whats the need of the legs then??

[x06jsp]

lol i wanted it to look like it was standing up floating not just floating as a box :D

Josh

[DonT-FeaR]

rodger...

lol updates are welcome btw :)

[x06jsp]

Lol thanks and im waiting on my tubing to come.... it will hopefully be here very soon :up:

Josh

[x06jsp]

And on with the update :D

well here is my tubing
http://i88.photobucket.com/albums/k173/jingerjosh/modular451.jpg

And the first section cut long enough with the p4 connector through
http://i88.photobucket.com/albums/k173/jingerjosh/modular452.jpg

I then cut the holes in the front of the psu housing
http://i88.photobucket.com/albums/k173/jingerjosh/modular453.jpg

and then all the holes i will need in the back plate including watercooling holes
http://i88.photobucket.com/albums/k173/jingerjosh/modular455.jpg

and here is the first hose through the p4 connector (it is not secured yet as i have to wait for the case to be painted before i can secure it)
http://i88.photobucket.com/albums/k173/jingerjosh/modular456.jpg

Then i cut more hose there is the p4 connector one, the one for the atx cable and one for a dual molex that will then plug into 2 extensions that will go from the mobo housing to the rad and pump housing as power for the fans and pump
http://i88.photobucket.com/albums/k173/jingerjosh/modular457.jpg

I then cut one for the sata power cable for my dvd drive
http://i88.photobucket.com/albums/k173/jingerjosh/modular458.jpg

front of the psu so far
http://i88.photobucket.com/albums/k173/jingerjosh/modular459.jpg

and here is an image from the back to show you whats going on so far :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular460.jpg

Crazy huh :D

I have worked out i need about 5 more meters of tubing that i will have to wait untill the end of the month to get as i am out of money :(

And thats it for today as always comments :D

Josh

[SXRguyinMA]

this things going to look sweet +rep for the crazy ideas on this build! :up:

[x06jsp]

Thanks mate :D

Josh

[mittelmeier]

That tubing looks crazy in a good way. +rep

[x06jsp]

Thanks mate :D

Josh

[The boy 4rm oz]

That is looking so so good. The black tubing was a fantastic idea.

[x06jsp]

Thanks mate :D and yer it looks alot better than cables just going everywhere

Josh

[985323]

Hey great looking mod, just wondering why paint it? it looks fine un painted, would look better if you just polished the metal a little, good way to save a little too...

but thats just me

[Yeticorn]

Man, like I said before, I wouldn't want the cable management job you have ahead of you, but props for even taking it on :D

[DonT-FeaR]

good luck mate :)

[x06jsp]

Hey great looking mod, just wondering why paint it? it looks fine un painted, would look better if you just polished the metal a little, good way to save a little too...

but thats just me

Thanks :up:

No in the flesh it deffinitely needs paint :D and trust me when you see the paint you will be happy i got it done :D


Man, like I said before, I wouldn't want the cable management job you have ahead of you, but props for even taking it on :D

Lol thanks :D


good luck mate :)

Thanks

Josh

[DonT-FeaR]

+rep

[x06jsp]

Thanks mate :D i will deffo have an update on monday as i got my new tubing and wire today

Josh

[DonT-FeaR]

SWEET update!!!! lol im happy... update k go :)

[Acey]

At this stage... WOW... tubes give it a 'good messy' look and I figure this is one of the most hardware heat-isolated module. +rep

[x06jsp]

Thanks mate :D

Josh

[Karbon Killa]

That looks sick. Love the cable management idea. Tubing looks great. Another cool idea would have been the braided shower hose stuff. +Rep

[x06jsp]

Thanks mate :D

Josh

[x06jsp]

Update time :D

First the wire and tubing that arrived on saturday
http://i88.photobucket.com/albums/k173/jingerjosh/modular461.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular462.jpg

The tubing for the molex for the hdds
http://i88.photobucket.com/albums/k173/jingerjosh/modular463.jpg

All the sata tubing done aswell 2 from the hdd housing and 1 from the dvd housing both to the mobo housing.
http://i88.photobucket.com/albums/k173/jingerjosh/modular464.jpg

and the pci e power tubing
http://i88.photobucket.com/albums/k173/jingerjosh/modular465.jpg

and from the back
http://i88.photobucket.com/albums/k173/jingerjosh/modular466.jpg

the starting of the tubing tamer
http://i88.photobucket.com/albums/k173/jingerjosh/modular467.jpg

polished
http://i88.photobucket.com/albums/k173/jingerjosh/modular468.jpg

so good that you can see all the way through perfectly :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular469.jpg

marked out for holes
http://i88.photobucket.com/albums/k173/jingerjosh/modular471.jpg

and one of the holes cut
http://i88.photobucket.com/albums/k173/jingerjosh/modular470.jpg

Thats it so far (more tomorrow)

Josh

[mittelmeier]

That looks nice. I can't wait to see the tubing tamer complete and in place with the tubes, that should add a nice touch.

[x06jsp]

Thanks mate :D

josh

[Yeticorn]

Gonna be SUH-WEEETT once everything is organized. Heck it looks great right now, I can't wait!

[SXRguyinMA]

:stupid: I dont even know what else to say :up:

[The boy 4rm oz]

Looking really cool. That clear plexi tube brace will make it look a whole lot neater. I am using some chrome 2 piece plastic ones for my visible cables. Shame the hole size will only accommodate regular PSU cables.

[jdbnsn]

This is turning out fantastic dude! Can't wait to see the finished product.

[x06jsp]

Gonna be SUH-WEEETT once everything is organized. Heck it looks great right now, I can't wait!

Thanks mate :D


:stupid: I dont even know what else to say :up:

Thanks


Looking really cool. That clear plexi tube brace will make it look a whole lot neater. I am using some chrome 2 piece plastic ones for my visible cables. Shame the hole size will only accommodate regular PSU cables.

awesome :D


This is turning out fantastic dude! Can't wait to see the finished product.

Thanks :D

Josh

[x06jsp]

Woot another update

I started by drilling the last holes for the tamer
http://i88.photobucket.com/albums/k173/jingerjosh/modular472.jpg

and a test fit
http://i88.photobucket.com/albums/k173/jingerjosh/modular473.jpg

And i like it like this soooo i will be using it :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular474.jpg

Secured
http://i88.photobucket.com/albums/k173/jingerjosh/modular475.jpg

I then cut out a rectangle of green and tried it out
http://i88.photobucket.com/albums/k173/jingerjosh/modular477.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular480.jpg

I like it :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular479.jpg

I then did a bit more cabling
The single sata power cable for the dvd drive
http://i88.photobucket.com/albums/k173/jingerjosh/modular478.jpg

and the dual for hdds
http://i88.photobucket.com/albums/k173/jingerjosh/modular476.jpg

and thats it for today :D

all thats left to do before paint is the cutout for the res :D as i can do the cabling while its being painted :D

Josh

[The boy 4rm oz]

I must say that green piece of plexi looks good on the tube tamer but wouldn't it look better without it, going with the whole "floating" theme and all.

I'm not saying you should remove it, it looks fantastic. Just a suggestion.

[x06jsp]

Na i dont mind the tubing not looking like they are floating :D i like it with more than without :up:

Thanks

Josh

[The boy 4rm oz]

Yeah just by looking at the pic I am growing fonder of the result lol.

[x06jsp]

Lol thanks :D

Josh

[SXRguyinMA]

love it! :up:

[x06jsp]

Thanks :D

josh

[mittelmeier]

Awesome! :up::up:

[x06jsp]

Thanks mate :D

josh

[985323]

:eek: wow thats all i can say is wow

[x06jsp]

Lol thanks :D


Josh

[x06jsp]

Only a small update today but an update nonetheless :D

I worked on making a second tamer for the stray hose going the other side of the psu housing so here it is :D

http://i88.photobucket.com/albums/k173/jingerjosh/modular483.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular482.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular481.jpg

I have to say i do love the look of 1cm acrylic polished up :D

And i also counted how many m4 bolts i have used on this project and its 253!!!!!

Thats it unfortunately.

Josh

[The boy 4rm oz]

This is really turning out well.

253 bolts!!! WOW that is a lot lol.

[x06jsp]

lol thanks mate yer it is :D

[mittelmeier]

Wow, 253 bolts?! That's insane. your case is coming along nicely.

[x06jsp]

thanks :D

Josh

[x06jsp]

midnight sparkle my girlfriends project is starting tomorrow so look out for it :D

Josh

[DonT-FeaR]

wow.

[x06jsp]

Lol thanks mate :D

and guys good news i managed to get a sales job that is extremely well paid for what it is so i will have plenty of money for modding :D

Josh

[Liquid_Scope_99]

Looking great man +rep glad to hear about the new job and modding funds

[DonT-FeaR]

Woooooo

[x06jsp]

Thanks guys :D

Josh

[Yeticorn]

Aw man, looks great. Love what you did with both the tamers by adding the green to the front. Really mimics the look of the whole project really well.

[x06jsp]

Thanks mate :D

midnight sparkle the mod for my gf will be up sooon :D

Josh

[DonT-FeaR]

look 4ward to it

[x06jsp]

Well guys a bit more stuff arrived

Cables
http://i88.photobucket.com/albums/k173/jingerjosh/modular484.jpg

and my vandal resistant switch (i love the decent click it gives :D gives it a quality feel)
http://i88.photobucket.com/albums/k173/jingerjosh/modular485.jpg

http://i88.photobucket.com/albums/k173/jingerjosh/modular486.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular487.jpg

the only problem is the sata connectors are a bit too wide to fit through the tubing it may go with a lot of persuasion so ill just have to cross that pridge when it comes to it :D

Josh

[SXRguyinMA]

Lookin good :D

[mittelmeier]

Switch looks great on there!

[Yeticorn]

I'm diggin the location/style of the power button, nice choice.

[The boy 4rm oz]

Power switch looks hot mate.

[DonT-FeaR]

agreed looks fresh man ... very cool

[x06jsp]

Lookin good :D


Switch looks great on there!


I'm diggin the location/style of the power button, nice choice.


Power switch looks hot mate.


agreed looks fresh man ... very cool

Thanks guys :D

I do like it aswell so allll is goooood :D

Josh

[x06jsp]

Well guys i got my res :D

so here you go
http://i88.photobucket.com/albums/k173/jingerjosh/modular488.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular489.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular490.jpg

:D

I like it

Josh

[mittelmeier]

That's a sick looking res. How much fluid does it hold?

[The boy 4rm oz]

Is that and Alphacool CapeCool res? (or whatever they call them. They don't hold much fluid but they look damn awesome.

[DonT-FeaR]

get 50 of em ... join them all togther and have a super res :)

[The boy 4rm oz]

get 50 of em ... join them all togther and have a super res :)

Would absolutely kill the flow rate though. Plus each one costs about $50AUD without fittings ($2-$4AUD each) or the mounting plate which costs anywhere between $15-$20AUD.

[DonT-FeaR]

:( ya rek'd mah dream Jase .... ya bully!~! lol

looks cool as tho

[x06jsp]

Lol thanks guys :D its an ac alutube res :D not sure how much fluid not much but it looks good and yer this with postage without tubing fittings was £28

Josh

[Acey]

Huh? Is that enough for the fluids?

[The boy 4rm oz]

Looks to me that the loop will be fairly long anyway cos he has to connect the main module to the rad module. I am guessing that a smaller res would probably work just fine cos there will be lots of fluid in the lines.

[x06jsp]

Dont worry there will be plenty of fluid the res isnt necessary but it looks good :D

Josh

[mittelmeier]

That res looks good outside the case and I'm sure it will look insanely awesome once you place it in the case. Can't wait.

[DonT-FeaR]

yea... looks great.

[x06jsp]

Thanks guys :D

[gramatton]

Just found this mod last night and i just have to say, ......wow.

You've completely deconstructed the computer case as it is know and created something new.

Truly amazing. Can't wait to see it finished.

[x06jsp]

Thanks mate :D

Josh

[x06jsp]

Update time :D

I started off today by cutting the 4" hole in the front of the res/pump housing for the res
http://i88.photobucket.com/albums/k173/jingerjosh/modular491.jpg

i then got it drilled and tapped and fitted the res
http://i88.photobucket.com/albums/k173/jingerjosh/modular492.jpg

mounted
http://i88.photobucket.com/albums/k173/jingerjosh/modular494.jpg

i then decided to see what it would be like with the pump in there aswell and it looks fine to me plenty of room :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular495.jpg

I am contemplating whether to do a window in the side of this module so you can see inside. and also im considering wether to cut some green to go ontop of the front facia of the res..

and also it is starting to look like i may have to paint these cases myself as i cant get hold of my airbrush artist and i cant afford another guy as my guy was doing them as a favour but oh well it just means i will have to miss out on the green metallic flakes.

Josh

[DonT-FeaR]

:( wait longer?? coff up the cash :) lol looking nice man

[blueonblack]

I am contemplating whether to do a window in the side of this module so you can see inside. and also im considering wether to cut some green to go ontop of the front facia of the res..

For what it's worth, I say hell yeah on the window. Nice work! +rep
________
ECIGARETTE FORUM (http://vaporizer.org/forum/electronic-cigarettes/)

[Acey]

Lookin good so far. Tear those paper off the plexi so we get more details haha. What theme you gonna a.b on it?

[x06jsp]

Thanks guys :D

yer i will be doing a window :D

no i dont have the money to coff up for the painting....

and i was just going to have it black with green metallic flakes in the clear but seeing as i cant get hold of my airbrush guy i am just going to go for a flat black, which should still look awesome :D

Josh

[mittelmeier]

The flat black will look nice on there. +rep

[x06jsp]

Thanks mate :D

Josh

[DonT-FeaR]

should still looks great...

flat... hmm y not gloss??

[x06jsp]

I like the look of flat :D it should give the alu a kind of stealth look and the acrylic should accent it nicely :D

Josh

[DonT-FeaR]

yea thats true FLAT it is!!! lol cant wait to see it

[The boy 4rm oz]

The pump and res look great mounted, nice work.

May I suggest a satin finish?

[x06jsp]

Satin is pretty much a flat black...

Thanks mate :D

Josh

[The boy 4rm oz]

Flat is no gloss, satin is a slight sheen, pretty much the same but slightly different. You can get pretty good effects by mixing the two. I used flat black on LEXA and probably wont use it again, I prefer the satin, slightly glossy look, tastes change lol.

[overmark]

On the front page, congratulations

[markkleb]

should still looks great...

flat... hmm y not gloss??
one other thing when painting panels is Flat is much easier to create an even shade, when using gloss it can be a bit tricky to keep an even coat (without streaking)

[The boy 4rm oz]

Congratz on the front page mate, you deserve it.

[DonT-FeaR]

congrats...very deserving man... well done

[mittelmeier]

gratz on the front page.

[Thorn]

Congratulation on the front page !

[x06jsp]

Thanks guys it means a lot :D

Josh

p.s. update in a few :D

[x06jsp]

Update time :D

Well i got to work on the facia of the res mount today

So first things first is was to disassemble the res
http://i88.photobucket.com/albums/k173/jingerjosh/modular496.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular497.jpg

I then drew around the original mount
http://i88.photobucket.com/albums/k173/jingerjosh/modular498.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular499.jpg

And if anyone was wondering what i look like on a normal cold day in the south of england here you go :P
http://i88.photobucket.com/albums/k173/jingerjosh/modular501.jpg

After a while of cutting i have this
http://i88.photobucket.com/albums/k173/jingerjosh/modular502.jpg

And drilled and assembled
http://i88.photobucket.com/albums/k173/jingerjosh/modular503.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular504.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular505.jpg

And thats it for today i will hopefully get my mini window done on the pump/res housing tomorrow

Josh

[SXRguyinMA]

looks sweet :up:

[x06jsp]

Thanks mate :D

Josh

[mittelmeier]

That really makes the res blend in with the rest of the mod. Looks great!

[x06jsp]

Thanks :D

Josh

[TheMainMan]

Just read through all 49 pages so far and without hesitation subscribed and repped. Phenomenal job man, can't wait to see it finished!

[DonT-FeaR]

that looks sweet man... nice job

[x06jsp]

Thanks guys it means alot :D

Josh

[x06jsp]

Another update for you lovely people :D

I marked out the area for cutting on the side panel of the pump housing
http://i88.photobucket.com/albums/k173/jingerjosh/modular506.jpg
and the acrylic
http://i88.photobucket.com/albums/k173/jingerjosh/modular507.jpg

acrylic cut
http://i88.photobucket.com/albums/k173/jingerjosh/modular508.jpg

and after more cutting and filing i have the side panel cut
http://i88.photobucket.com/albums/k173/jingerjosh/modular509.jpg

and mounted
http://i88.photobucket.com/albums/k173/jingerjosh/modular510.jpg

and also i found some satin black left over from ages ago along with some primer so i thought i would just test it out this is with 1 coat of each and the only prep was a very quick rub down with some 320g sandpaper it turned out pretty much perfect :D but its very hard to photograph
http://i88.photobucket.com/albums/k173/jingerjosh/modular511.jpg

Thats it for today unfortunately

Josh

[mittelmeier]

Nice window. That color paint will look awesome on there.

[x06jsp]

Thanks mate :D

[The boy 4rm oz]

The window looks cool, nice shape. The satin paint looks good, run with it.

[DonT-FeaR]

paint looks sweet nice job man

[x06jsp]

Thanks guys :D

I am deffo gunna go with the satin :D i may start doing one or two of the modules (if i have enough paint that is) next week

Josh

[DonT-FeaR]

ill look forward to it

[The boy 4rm oz]

Sweet, can't wait to see you start painting those modules.

[x06jsp]

thanks guys more good news aswell i am starting 'black barracuda' in just over a week :D

Josh

[DonT-FeaR]

:O another mod :) sweet

[x06jsp]

Yer i cant wait to get started on it :D

Josh

[DonT-FeaR]

i cant wait for you to get started on it either

[x06jsp]

Update time :D

Well today i started painting the case with what little paint i have available atm.... which wasnt much not even enough to finish the dvd drive but its going well and when i can get some more then i will get the case painted and it will be finished (untill i can get the watercooling for it... ill mainly let the photos do the talking for this update.

http://i88.photobucket.com/albums/k173/jingerjosh/modular512.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular513.jpg

(this looks very bumpy but thats just because i had only just sprayed like 5 seconds before the photo and its not nearly as bumpy so dont worry :D)
http://i88.photobucket.com/albums/k173/jingerjosh/modular514.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular515.jpg
http://i88.photobucket.com/albums/k173/jingerjosh/modular516.jpg

and this is where i got to not perfect but i will keep going till it is :D
http://i88.photobucket.com/albums/k173/jingerjosh/modular517.jpg

Josh