TRIBALOVERKILL, "Blackout" [Archive] - Page 5

tribaloverkill

08-24-2007, 09:16 PM

This is a big update. We've got major SIGNAGE HERE PEOPLE!!! My god this thing cam out great,....

Aug-24-2007

Started making some wiring management. Ran these things through the router until I reached 1/4". Then I drilled holes all the way down them to run wires through.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_1-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_1-800.jpg)

Ran them through the router again. I got them just above 1/8". I got nervous and stopped. I'll sand the rest of the way.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_2-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_2-800.jpg)

The sides with the holes gets glued down.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_3-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_3-800.jpg)

Kinda like this.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_4-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_4-800.jpg)

I ended up breaking one so I broke them all up into groups of 8 and two 5's I think? This worked out fine.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_5-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_5-800.jpg)

You just slide the wires through:) I rounded the holes too using a file so it easier to get the wires through.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_6-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_6-800.jpg)

I drilled holes for the LED's.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_7-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_7-800.jpg)

I didnt know that LED's were tapered. Didnt know you could install them like this. I'll have to remember this for when I make more reservoirs:)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_8-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_8-800.jpg)

They just make surface on the other side.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_9-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_9-800.jpg)

Pretty:)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_10-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_10-800.jpg)

Time to wire the LEDS!!! I went out and bought wire and resistors. I got a 47ohm for series of 3 LEDs and a 220ohm for a single LED. This is going to be tight!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_11-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_11-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_12-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_12-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_13-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_13-800.jpg)

Preview,...
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_14-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_14-800.jpg)

YEA!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_15-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_15-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_16-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_16-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_17-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_17-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_18-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_18-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_19-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_19-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_20-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_20-800.jpg)

tribaloverkill

08-24-2007, 09:17 PM

So cool looking!!!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_21-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_21-800.jpg)

Dirty walls:\
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_22-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_22-800.jpg)

Back of the panel lit up.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_23-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_23-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_24-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_24-800.jpg)

Behind the tinted acrylic. I noticed something,....
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_25-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_25-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_26-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_26-800.jpg)

With the window off the letters,....
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_27-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_27-800.jpg)

With the window on the letters. You see how the tinted window is enhancing the glow effect. It's like reflecting it back to the panel of something. Very cool.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_28-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_28-800.jpg)

These are all with the window on,...
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_29-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_29-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_30-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_30-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_31-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_31-800.jpg)

So,... all the wiring again. I happen to like the way all the wiring looks, lol. I think it looks cool.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_32-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_32-800.jpg)

The studio is wrecked!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_33-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_33-800.jpg)

Heres one series of 3 and one single. The series has a 1/2 watt because the store only had 1/2 watt 47ohm resistors. The other is a 1/4 watt because thats what I had. The 1/4 watt is plenty.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_34-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_34-800.jpg)

Clamped for soldering. You know the clamp acts as a heatsink too. always try and isolate your components behind the clamp.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_35-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_35-800.jpg)

Very nice:)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_36-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_36-800.jpg)

My series.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_37-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_37-800.jpg)

God I love this heatshrink! It works so good!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_38-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_38-800.jpg)

Fits there like so.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_39-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_39-800.jpg)

Lit up.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_40-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_40-800.jpg)

Wham. All of them installed.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_41-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_41-800.jpg)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_42-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_42-800.jpg)

Behind the text.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_43-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_43-800.jpg)

Making two very small bus bars out of some small diameter copper pipe. I flattened it and then folded it over so its a nice little bar. I flattened the S@#$ out of it.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_44-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_44-800.jpg)

tribaloverkill

08-24-2007, 09:18 PM

10 holes.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_45-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_45-800.jpg)

I know someone asked me what bus bars are for. This is what they are for. That looks so cool.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_46-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_46-800.jpg)

Looks like a friggin weld! LOL.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_47-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_47-800.jpg)

Ready to go!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_48-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_48-800.jpg)

Power source.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_49-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_49-800.jpg)

Hot glue for final step. I'm going to let this heat up. In the mean time,...
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_50-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_50-800.jpg)

Access hole into the pump tower where the connection will be made to power up the back panel. Once I have this panel on, I wont have to remove it ever again.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_51-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_51-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_52-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_52-800.jpg)

Here you go. I hot glued any exposed metal. I dont want anything touching them!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_53-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_53-800.jpg)

All done.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_54-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_54-800.jpg)

Installed.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_55-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_55-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_56-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_56-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_57-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_57-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_58-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_58-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_59-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_59-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_60-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_60-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_61-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_61-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_62-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_62-800.jpg)

OH MY GOD THIS LOOKS SO GREAT!!! It looks like a capsule or something. Not just lit up text on a side panel,... omg I am so loving this.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_63-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_63-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_64-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_64-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_65-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_65-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_66-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_66-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_67-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_67-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_68-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_68-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_69-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_69-800.jpg)

So yea! Stupid question but what you think! I still have to tweak the cover on there a bit buts it's done. All my LEDs are fine. They were just under powered. Some of them just seem to respond better with less power. this I dont know why. Going back to the studio now. I was in there for 29 hours. I think thats the longest I have been in there at one time.

tribaloverkill

08-24-2007, 09:18 PM

Wallpaper(1600x1200):
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_17-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_17-1600.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_20-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_20-1600.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_21-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_21-1600.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_29-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_29-1600.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_30-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_30-1600.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_42-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_42-1600.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_59-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_59-1600.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_61-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_61-1600.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_67-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_67-1600.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_69-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-24-2007/Aug-24-2007_69-1600.jpg)

The boy 4rm oz

08-24-2007, 09:36 PM

Mate awesome, insane, great. You have done a great job with the whole thing. Now get it all together lol.

tribaloverkill

08-24-2007, 09:42 PM

Mate awesome, insane, great. You have done a great job with the whole thing. Now get it all together lol.

Not ready for that. I have other stuff to do first.

The boy 4rm oz

08-24-2007, 09:47 PM

Well anyway you have done a great job.

FrooP

08-24-2007, 10:01 PM

tribaloverkill

08-24-2007, 10:03 PM

dude.... you know i saw awesome mods before... but this thing... i cant find any words for that.. im so Friggin speechles... dude you got so awesome skillz
i would give you a gazillion reps for that it is just incredible awesome :eek:

Thanks guyz! I have to figure out whats next! I think I will work on the radiator tower now. Finalize that a bit more.

tribaloverkill

08-26-2007, 01:17 AM

Ok,... didn't tweak the mobo rear cover. All I have to do really is sand down some washers a bit that I using along with some 1/8" spacers. They are a bit taller then they are suppose to be. Maybe a 1/32"? I dont know. Instead,....

Aug-25-2007

First,... before putting away all the soldering stuff,... I had to make this this. Been wanting make this for a while. More Uv LEDs to better light up the stuff I make. The one LED flashlight wasn't really cutting it.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_1-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_1-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_2-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_2-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_3-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_3-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_4-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_4-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_5-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_5-800.jpg)

See:) Much better:)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_6-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_6-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_7-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_7-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_8-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_8-800.jpg)

Now. Back to the radiator tower:) My goodness. This thing brings back memories. I made this thing like 2 years ago!!! More then 2 years ago!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_9-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_9-800.jpg)

Taking it apart.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_10-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_10-800.jpg)

This thing is using 8-32 bolts. They have to go. I think im going to be ordering some button head hex 6-32's now.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_11-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_11-800.jpg)

The canopy cover. This thing is so damn cool.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_12-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_12-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_13-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_13-800.jpg)

Old school. I used these slightly rounded nuts to center the posts. Going to do something better then this.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_14-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_14-800.jpg)

Gawd,... this just looks so hardcore to me! Rock friggin solid looking. Damn.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_15-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_15-800.jpg)

Almost there.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_16-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_16-800.jpg)

tribaloverkill

08-26-2007, 01:18 AM

Heatercores from danger den.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_17-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_17-800.jpg)

LOL! Look at all these! Look at all the nuts and washers!!! I'm going to load this rad tower up with threadserts now. Will make this thing that much better and easyier to put together.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_18-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_18-800.jpg)

I used 1/8" angle aluminum?!?!? What was I thinking! HA HA HA. This thing is a tank. I swear. You guyz would have to hold it and understand what I mean. Not because it's heavy but because its like tight soild sturdy.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_19-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_19-800.jpg)

All the aluminum.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_20-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_20-800.jpg)

Acrlyic. I'm going to have to use my polishing skills to finish off those edges:)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_21-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_21-800.jpg)

Cant forget these!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_22-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_22-800.jpg)

So nice. It's amazing. But I can see the transformation from what I was to what I am now. Meaning I was accurate back then but looking at this thing,... I can see places where I "settled". I'm not going to try and fix anything, maybe just tweak or adjust a bit but thats it.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_23-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_23-800.jpg)

Look at this! It was a Lian-Li under all the tape! So pretty! and clean!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_24-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_24-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_25-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_25-800.jpg)

This has to go too. Not the bracket, the reservoir. I have to make a custom reservoir for this machine.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_26-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_26-800.jpg)

I love this bracket,....
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_27-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_27-800.jpg)

Ewwwwwwwwww,...
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_28-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_28-800.jpg)

Sanded all of the aluminum down to 80grit. Oh,.... I did mention that I'm going to polish all this out right? LOL:)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_29-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_29-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_30-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-25-2007/Aug-25-2007_30-800.jpg)

The boy 4rm oz

08-26-2007, 04:55 AM

2 years is a long time lol. Gives you time to reflect though.

Crazy Buddhist

08-26-2007, 05:55 AM

So yea! Stupid question but what you think!

Yeah .. down to your usual low standards

Matthew

ps useful rule in life: don't ask the stupid questions: you get the stupid answers :D

tribaloverkill

08-29-2007, 12:34 AM

What up people! Update.

Aug-28-2007

Ok,... this is how I install thread-serts. I'm using 6-32 thread-serts which require a 7/32" hole. Done.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_1-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_1-800.jpg)

Now,... When you go to push in the thread-sert, you should be able to push it in with your thumb up to the knurls I believe their called. In the pic I was not able too. All you have to do is file just a bit and try again. Try not to file to much so that it goes all the way in effortlessly. It's not THAT bad but its not good. Like resistor's,.... thread-serts have a tolerance too. Some are bigger then others. Not by much,... but when you go to stick some of them into the holes you drilled,... you will see what I mean.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_2-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_2-800.jpg)

This is ideal.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_3-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_3-800.jpg)

Now,...using something like this socket which is JUST big enough to fit over the thread-sert,....
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_4-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_4-800.jpg)

You whack it like this! This pushs the thread-sert all the way in. You do this so the knurls kind of cut their way in. They help keep the thread-serts from spinning in the hole. Try not to hit to hard for you will dent up your aluminum.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_5-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_5-800.jpg)

Make sure you get it in all the way too. After you drill your holes you should sand away the burr from the hole because it could keep it from being pushed in all the way.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_6-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_6-800.jpg)

A thread-sert is really two piecess. It only starts off as one piece. Once you go to set it the top piece breaks off and get pushed or pulled into the lower piece expanding the lower piece around your aluminum keeping it in place. But this does not keep the top piece or what is not the inside piece from coming out. Thread-serts really only work from one side. The side we're looking at in the picture is not that side. The screw goes in through the other side pulling another piece of aluminum to this piece of aluminum,... pulling the top/ inside piece of the thread-serts towrads the aluminum. You get me?
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_7-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_7-800.jpg)

Heres the lower piece before expansion. You see the gaps around the lower piece? That gets filled up when the lower piece is expanded.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_8-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_8-800.jpg)

These are set/expanded.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_9-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_9-800.jpg)

Heres the other side. this is the side where the bolt gets inserted.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_10-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_10-800.jpg)

Dont forget to rethread them. With all the banging to set them,... the threads are totally F'ed up. When rethreading them.... make sure you use a bit of cutting oil or something on the tap and blow off the metal shards after each tap. You dont want to dislodge the inside piece of the threadsert. Chances are you will loosen up a few. If this happens,... install new one. After you remove the old,... the hole you drilled will be a bit stretched out. Try and use the biggest thread-sert of the size your using for the second time around. Remember what I said about threadsert tolerance? Find the biggest ones to use for this situation. MAKE SURE YOU RETAP THEM STRAIGHT TOO!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_11-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_11-800.jpg)

With a little bit of sanding they actually look pretty nice.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_12-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_12-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_13-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_13-800.jpg)

WhaLAA! This one is done.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_14-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_14-800.jpg)

Lets start putting this thing back together with the thread-serts now.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_15-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_15-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_16-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_16-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_17-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_17-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_18-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_18-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_19-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_19-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_20-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_20-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_21-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_21-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_22-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_22-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_23-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_23-800.jpg)

tribaloverkill

08-29-2007, 12:34 AM

Now,... I need spacers for my posts. I dont feel like using those sheetrock anchors this time around. I got out my good ole mitre saw. Hooked to the vaccuum to keep from making a mess.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_24-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_24-800.jpg)

Using the wood as a stop block. Its about 1/2" fromt eh blade.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_25-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_25-800.jpg)

There you go. 1/2" strips of 1/4" acrylic.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_26-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_26-800.jpg)

Yea,... the vaccuum is a real big friggin help,...
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_27-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_27-800.jpg)

I sent the strips through again and ended up with these.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_28-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_28-800.jpg)

I need holes through the center so I set up this jig so all I have to do is put them in and drill! I can drill three at a time. The board on top keep the pieces from riding up the bit one I pass though the last one. The almuminum strip is just making up for the 1/16" gap at the top thats it.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_29-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_29-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_30-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_30-800.jpg)

Done. Drilling that is.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_31-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_31-800.jpg)

Loading them up on these 8-32 bolts.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_32-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_32-800.jpg)

Done.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_33-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_33-800.jpg)

Very nice.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_34-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_34-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_35-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_35-800.jpg)

Time to polish them. So nice.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_36-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_36-800.jpg)

This is how I polished these. I spun them at 2170rpm.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_37-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_37-800.jpg)

I used rubbing compound and a,...... paper towel to polish them. You see how the aluminum wipes off onto the paper towel? This goes the smae for the wheel. It has to be cleaned off because you cant polish with it. I swear I had this paper towel smoking at one point, LOL. So were my fingers:(
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_38-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_38-800.jpg)

Very nice.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_39-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_39-800.jpg)

The old spacers. ICK.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_40-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-28-2007/Aug-28-2007_40-800.jpg)

SgtM

08-29-2007, 01:12 AM

I like Tribaloverkill.. he makes shiney stuff..

Seriously man, this thing is looking soooooo good. A big thumbs up for the creativity on those spacers. +rep.

The boy 4rm oz

08-29-2007, 08:15 AM

I was looking for an idea for how to make spacers, I think I may have found one that works for me. I was going to use motherboard standoffs but they look tacky, the acrylic ones look good though. An excellent and shiny job once again.
+rep

kingstog

08-30-2007, 12:00 AM

+rep for the worlds shiniest mod

tribaloverkill

09-01-2007, 01:50 AM

Argh,... want to finish this radiator tower before I have to go back to work.

Aug-31-2007

Bling,................... BLING!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_1-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_1-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_2-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_2-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_3-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_3-800.jpg)

The edges of the sides were polished too seeing that they will be very visible.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_4-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_4-800.jpg)

I did that with this buffing wheel I altered,.... It's very firm so it's ideal for polishing edges.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_5-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_5-800.jpg)

You guyz have no idea of how much of a pain in the arse it was to polish all that. No becaue it's a lot but because of the weird shapes. I destroyed the studio polishing those things. I have never seen this place so trashed in my time here! All of this black fuzzy soot everywhere!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_6-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_6-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_7-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_7-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_8-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_8-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_9-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_9-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_10-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_10-800.jpg)

So i clean the place up good. This is what I have now. I need to finish the windows now.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_11-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_11-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_12-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_12-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_13-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_13-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_14-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_14-800.jpg)

I even cleaned up the office / storage area too:)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_15-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_15-800.jpg)

Windows! Have to finish these,...
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_16-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_16-800.jpg)

Bad pic but that edge has to go.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_17-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_17-800.jpg)

tribaloverkill

09-01-2007, 01:50 AM

HA HA HA,... your probably thinking,... what the hell are those! Well,.... as I was sanding the edges/corners of the OLD windows,... I managed to scratch the ****e out of them. I layed them directly on the table and you know whats next. they were just scratch,... there were gouges! I didnt feel like sanding them down and polishing them. so im making new ones.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_18-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_18-800.jpg)

This time I'm doing the corners and edging the right way:)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_19-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_19-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_20-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_20-800.jpg)

TA DAH! You do all the corners first and then,....
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_21-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_21-800.jpg)

... do the edges.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_22-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_22-800.jpg)

Wham. Perfect. I still have to drill holes and polish the edges.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_23-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_23-800.jpg)

Look how nice. Just needs some light sanding and polishing.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_24-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_24-800.jpg)

Preview.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_25-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_25-800.jpg)

These little windows were not scratched but still,... I am making them again because the screw holes are a bit to close to the edge. Agreed?
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_26-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_26-800.jpg)

Canopy. The canopy frame is polished on both sides:) Reason being because the towers main shell is polished. I dont want to reflecting the ugly underside of the canopy:)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_27-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_27-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_28-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_28-800.jpg)

Damn thats just to cool.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_29-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Aug-31-2007/Aug-31-2007_29-800.jpg)

AUGUST IS OVER:( Time to go back to work. This means that I wont be spending as much time in the studio as I was this past month. Actually it might just be a bit slower in the studio then it was before I went on vacation. Reason being that I have to bust my arse to pay off my bills. I was presented with an oppertunity to help pay off my bills REALLY quick. Or atleast as a lot faster. I have to really bust my arse though. I will try and get as much time in the studio as possible. Blackout and is just about nearing completion, kinda. It's sure does feel like it! It's almost done. I want to get it done right away. But bills come first as you all know. I'm going to shower and go back to the studio to finish these windows OH! Remember the stock grills I was using for the fans? Not using those. I making my own to match the ones on the case. I have to do that too! Damn.

The boy 4rm oz

09-01-2007, 02:03 AM

Yeah your right, that does look cool. Windows look great as always and that polishing is fantastic, great job.

Scotty

09-01-2007, 04:01 AM

Bills suck, and so does work.
But as long as you keep going and don't give up it'll all be good.
And so far this thing is smokin'

tribaloverkill

09-02-2007, 09:16 AM

Ok the radiator tower is alomst done. I just have a few more things to do.

Sep-01-2007

Putting it back together just to take the next few pics,...
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_1-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_1-800.jpg)

Canopy,....
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_2-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_2-800.jpg)

Made these as a temp solution.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_3-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_3-800.jpg)

They are going to help keep the post bolts errect. "UH Huh hu hu huuh,... he said errect"
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_4-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_4-800.jpg)

The posts slide right over them. I had to loosen the a bit. I cant turn the bolts with the rounded nut wrenched on there. I have cheese head hex bolts coming in the mail. They will make installing the tower to the case a lot easier.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_5-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_5-800.jpg)

Eye candy,...
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_6-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_6-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_7-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_7-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_8-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_8-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_9-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_9-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_10-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_10-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_11-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_11-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_12-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_12-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_13-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_13-800.jpg)

This tower is something else. First,... it's heavy! Holy hell its heavy. But,... i kinda like it:) It's like,... I cant explain it. I said this before,... its like heavy rock solid. You guyz would have to hold it to understand what I mean. Its like a unit. So cool. In the future though,... have to lighten thing up a bit. Might start working with 1/32" aluminum for shell and covers. Not sure. Anyways,... you see the tube panel flipped over? Well,... this is the side thats suppose to be facing out. I have to polish this side now. No big deal. Now,... what about dem grillz? They have to go right? I mean,... they look good as hell with the polished aluminum, but I made my own grillz elsewhere on the case. These dont fit in you know what I mean? So,...
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_14-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_14-800.jpg)

Going to make new ones:) Kinda like this:) I jhave to make an acrylic spacer like I did for the others but,... im going to ask even though i'm sure I know what you all are going to say. I know what I want too. Should the acrylic spacer should be tinted or green? I used tinted for all the other grillz. I ask about the green because under the wheel I use green as spacers for the wheels remember? I'm thinking tinted. i plan on loading up the rad tower with green LEDs to give it some of the green that the case has. Yea. Im thinking tinted. What you about you?
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_15-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_15-800.jpg)

These will be the grillz. Cut this from a panel of aluminum I got from a scrap yard. Seriously neeeds some sanding...
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_16-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_16-800.jpg)

80 grit @ I believe 1560rpm.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_17-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_17-800.jpg)

Right after polishing with a buffing wheel,...
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_18-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_18-800.jpg)

Right after polishing with a polishing pad thingy,...
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_19-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-01-2007/Sep-01-2007_19-800.jpg)

So yea. Things I still have to do for this tower before its totally complete,... install LEDs, which will require some kind of acrylic mounting brackets or something. I have to make some kind of bracket to hold in place the chrome shower hose that will pass from the case to the rad tower. The shower hose will be used to pass wires to and from. And lastly,... I want to cut the hose barbs down just a bit and then install new hoses. After that I think thats it?!?!? Will be time to move on to something else. Either I'll continue working on the PSU after I buy more shower hose or,... I think I will design a custom blackout reservoir;) I know what I want too:) Anyways,... I have to friggin work tonight, EEEEWWWW. OH! Forgot to tell you guyz,... my car is F@#$ed! Car was knocking while driving. Took it to the machanic and he said its the tranny. 4th and 5th gear are done PLUS, both CV joints are shot, engine mounts and worn out, needs new exhaust,...I think thats it?!? The car is only worth like $500 in ok condition. So I am going to just donate it to charity or something. Im back to driving my gas guzzling pick-up truck. Life just keeps getting better and better:) Well atleast I get to sleep in my bed now. I slept in my bed like twice during august. I slept on the friggin floor of the studio for an entire month?!?!? Geeez.

The boy 4rm oz

09-02-2007, 10:04 AM

Now isn't that just the sex lol, fantastic job haha. Sucks about your car buddy, same thing happened to my mates.

hogan

09-02-2007, 02:57 PM

tinted!!

Ap1thy

09-02-2007, 09:29 PM

hah both cv joints nice... good thing it didnt just stop moving on ya then

<3 the case too

The boy 4rm oz

09-03-2007, 03:08 AM

That's what happened to my friend, rear wheals locked up and he slid into a tree lol.

b4i7

09-03-2007, 03:20 AM

if its broke, mod it :D

Scotty

09-03-2007, 05:48 PM

....

I don't think there is anything i can say to describe how friggin awesome that is... ok well there's some words to describe it lol

Crazy Buddhist

09-05-2007, 03:42 AM

... The canopy frame is polished on both sides:) Reason being because the towers main shell is polished. I dont want to reflecting the ugly underside of the canopy:)

amazing and inspiring work as always

kingstog

09-05-2007, 08:02 AM

This was the first weblog I ever subscribed to, like a year ago, can't wait to see it finished but kinda want it to go on forever too. I LOVE THIS MOD!

tribaloverkill

09-06-2007, 01:14 PM

ARGH! Finally! UUUUUUUUUPDAAAAATE! This update is being dedicated to Teyber:)

Sep-03-2007

My rad tower grills.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_1-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_1-800.jpg)

Nice, STRAIGHT, grooves.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_2-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_2-800.jpg)

My aluminum is polished, taped, and as you can see I made my marks right on the tape. I then used a razor to cut away the tape exposing the areas that will be cut way with the scroll saw.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_3-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_3-800.jpg)

I used this:) Its square:) My aluminum sheets that im using for the grill are pretty damn square so I can use the edges to draw straight lines with the square.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_4-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_4-800.jpg)

I used a ruler to mark lines every 1/8".
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_5-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_5-800.jpg)

I used these, a tack hammer and a center punch to punch little pits where I want to drill.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_6-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_6-800.jpg)

I punched as close as I could to the end so that when I drill,... the drill will cut out that end. I do this because it's one less end to cut out.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_7-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_7-800.jpg)

The drill bit shold only be a bit bigger then the blade your using. It really doesnt matter as long as the bit does not touch the tape! Your center puch might be off just enough so that when you drill,... it might touch the tape! DONT DO THIS! Use a bit thats big enough to just get the blade through.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_8-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_8-800.jpg)

You see how much slack I have just in case my punches are a bit off center?
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_9-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_9-800.jpg)

Now its time to drill.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_10-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_10-800.jpg)

You see how I have that bit close to the edge like that? Thats so that theres more table around the hole your drilling. When you push down on the aluminum to drill it out,... it bows a bit. Drill like this helps prevent this. Bowing can lead to the bit walking the surface, crooked holes if you drilling through several thin sheets at once.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_11-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_11-800.jpg)

I have to make several holes so I want the bit very close to the aluminum so I dont have to pull down as much on the lever to make all these holes. It s quicker.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_12-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_12-800.jpg)

Done.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_13-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_13-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_14-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_14-800.jpg)

This is the other side of the aluminum. You need to file and sand this bur away before you continue to work with the aluminum. The aluminum does not sit flat on the table with this stuff on here like this.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_15-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_15-800.jpg)

A uni-bit. Going to use it to drill the larger holes for the tread-serts.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_16-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_16-800.jpg)

Same thing as the drill bit. You want it close to the edge so the aluminum is supported. Also,... with a uni-bit it helps to set the depth so you can drill to far. I have mine set at 7-32 for the serts.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_17-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_17-800.jpg)

All done. Time to cut but first,....
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_18-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_18-800.jpg)

:)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_19-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_19-800.jpg)

Yum.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_20-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_20-800.jpg)

Ok,... im going to time myself. I have to cut out 38, 3-3/4" x 1/8" grooves. 1:15am and I'm still workin!!!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_21-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_21-800.jpg)

tribaloverkill

09-06-2007, 01:17 PM

Done.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_22-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_22-800.jpg)

Now this is ideal.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_23-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_23-800.jpg)

I saved time but leaving these ends looking like this. Several seconds each groove. These little things I left behind file away faster then I can cut them away. Plus I have to file that end clean anyways.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_24-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_24-800.jpg)

You see how I did NOT touch the tape. In some places I left more aluminum and in others I just brushed right up against it but did not cut through it. It wasn't really rushing to do this. I think I may have been rushing a bit but I tried not to. I wanted to see how long it would typically take me.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_25-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_25-800.jpg)

Again,... this end is easy to file away.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_26-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_26-800.jpg)

So,... #1 took 42 minutes. Lets do #2 and compare.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_27-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_27-800.jpg)

Start time,... yes I took a small break. LOL. Was trying to drink my coffee before it got completely cold.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_28-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_28-800.jpg)

Done?!?!?
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_29-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_29-800.jpg)

What a dirty mess.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_30-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_30-800.jpg)

The second one was faster? This is weird because I wasn't anywhere near rushing this time. My head was in the clouds actually. I was very comfortable cutting this panel while during the first one I was worried about the time. Didnt worry about the time for this one. So,... I saved a lot of time relaxing:) 1 hour and 19 minutes of total cut time.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_31-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_31-800.jpg)

Time to file.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_32-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_32-800.jpg)

Here's the backside. As you can see they are pretty straight:)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_33-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_33-800.jpg)

Ummm yea;)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_34-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_34-800.jpg)

These are the 3 files I use to make these grills. The thinnest one to get the second thinnest one in there. The largest to finalize the grooves. It's a finer cut and I use it to kind of make sure the grooves are all just about the same width.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_35-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_35-800.jpg)

Three different thicknesses.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_36-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_36-800.jpg)

tribaloverkill

09-06-2007, 01:18 PM

Almost done. I just got done filing with the tape side towards me. I removed everything I didnt cut away. I filed to the tape basically. This doesnt mean the grooves are perfectgly straight though. To make sure they are I will turn it around and file from the other side using the biggest file. The tape will hinder you from seeing certain things. You have to look at the actual aluminum to see if they are straight. Eyeball it.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_37-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_37-800.jpg)

This is complete. Just need to clean it up a bit.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_38-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_38-800.jpg)

Nice and perfectly straight:)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_39-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_39-800.jpg)

Nice but still not done:) Oh by the way,... filing takes a S@#$ A#% long time. So be prepared to duke it out.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_40-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_40-800.jpg)

Very nice. All the holes line up!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_41-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_41-800.jpg)

Heres both of them just about done.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_42-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_42-800.jpg)

Took a break and carved this into my table. LOL. I like it. Looks scary.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_43-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_43-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_44-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_44-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_45-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_45-800.jpg)

Before I round the edges of the grills I want to make these first. Done.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_46-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_46-800.jpg)

Sanded the edges round first. All I have to do if buff them out now. No need to wetsand. The buffer to eat all those scratches up quick. Even that slip of the razor you see there. Its not deep so it will come out quick.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_47-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_47-800.jpg)

Their all done.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_48-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_48-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_9-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_49-800.jpg)

FRIGGIN A MAN!!! WHAHOOOOOO!!!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_50-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_50-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_51-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_51-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_52-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_52-800.jpg)

Look at that! You cant see the fans! Thier right in front of us too! Their not covered!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_53-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_53-800.jpg)

Cool ehh?
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_54-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_54-800.jpg)

I just got the hex bolts in the mail. So im goign to open it back up and install some LEDs and the hoses. I'll close it up and thats it! Time to move on to something else.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_55-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Sep-03-2007/Sep-03-2007_55-800.jpg)

xRyokenx

09-06-2007, 01:44 PM

As in finished with the mod altogether? Wow... 104-105 pages, lol. Looks good though, I'll give it a more thorough look when I get home.

tribaloverkill

09-06-2007, 01:46 PM

As in finished with the mod altogether? Wow... 104-105 pages, lol. Looks good though, I'll give it a more thorough look when I get home.

Nope,... just the Rad Tower my friend:)

b4i7

09-06-2007, 01:49 PM

TO those look tons better than the ones before

xRyokenx

09-06-2007, 01:49 PM

Oh, lol. Well, I guess there's another 45 pages at the least. :p

Cool mod though...

The boy 4rm oz

09-06-2007, 08:44 PM

Fantastic as always.

alphastryk

09-07-2007, 01:40 AM

looking great as always

Scotty

09-07-2007, 03:44 PM

very nice again.

SgtM

09-09-2007, 04:21 AM

WOW TO! Incredible work as always man. +rep.

Blackout

09-10-2007, 07:13 PM

oioi tribal looks like things are going awsomly as per usual, i must ask though what is it you do as a job i ask this because A, to work them hours on this project you either have a really understanding bos or dont have a boss atall lol! and B, you are super super talented and should do this for a living, oh and what does the future hold for this case when its completad, will it be for your use or will it be purely a show piece used for shows by you and your sponsers?

tribaloverkill

09-10-2007, 07:51 PM

Dude I work at hospital as a nurses aid. Why? I dont know. for the longest time I didnt know what I wanted to do for a career. I've been a nurses aid for like 8+ years now. Now that I found what I really want to do as a career,... I'm on it;) I work nightshift. Most of time I am tired as hell. When I am tired I can not think. All of the cool stuff you seen this past month I did while I was on vacation. I was on vacation for the entire month of Aug. Blackout is going to be my work hoarse eventually. At first I will take it to a few events and show it off. Give you guyz a chance to see it in person. After that it will be used to do some gaming and mostly work, processing pics, updating etc. I dont really have a sponsors right now. ACRyan is more like a partner as oppose to being a sponsor. I will try and get some sponsors towards the end of blackout. I will need hardware for it. After blackout is when I begin my journey,...

jdbnsn

09-10-2007, 09:03 PM

I forsee no problems obtaining sponsorship for that thing. Also, may I have it?

crenn

09-11-2007, 05:40 AM

Shotgun! :P

Blackout

09-17-2007, 03:29 AM

Greco101

09-30-2007, 07:34 PM

God damn, I haven't looked at this project in a while. Any idea about how much you have into this project so far? Hours? $ of Materials?

tribaloverkill

09-30-2007, 07:57 PM

God damn, I haven't looked at this project in a while. Any idea about how much you have into this project so far? Hours? $ of Materials?

I dont know how many hours,... how about years? Started this in Jan 2005. It really didnt take me that long though. I have been working on it on and off since then. I know there was a period of like 6 months a while ago that I didnt touch it. I just posted new stuff in LEVO.

Greco101

10-01-2007, 04:27 PM

Damn, that would have been some interesting information for the magazine I'm sure it will be in. Maybe on your next build, keep a log of everything? Beautiful so far man... can't wait to see it finished.

p0Pe

10-11-2007, 02:44 AM

yeah:D... what are you gonna do with the case afterwards?

tribaloverkill

10-11-2007, 02:55 AM

yeah:D... what are you gonna do with the case afterwards?

I'm going to make appearances with it, enter it into contests,.... the whole nine yards. I bought all the shower hose I need for blackout I just got it in the mail the other day. 10 chrome shower hoses!!!

p0Pe

10-11-2007, 05:37 AM

nice:D... get going with them then! :p.. cant wait to se more updates!... this is godlike

The boy 4rm oz

10-11-2007, 06:39 AM

I want pics lol.

tribaloverkill

10-11-2007, 06:44 AM

I actually got a lot of stuff in the mail,... a load of stuff from acryan to try out and use. I still have more stuff I need from them. I got UV blue hose for blackout, aluminum rods, o-rings, copper rods, nylon rods, lathe bits, more acrylic rods and tubes,... whatelse? I cant remember. The hose.

The boy 4rm oz

10-11-2007, 06:47 AM

Sounds good, can't wait.

tribaloverkill

10-08-2008, 04:51 PM

Welcome back! Time for some Blackout goodness,.... now, where was I?

Oct-08-2008

I was here! I left off here. Installing chrome shower hose wire sleeving. As you can see I got all new shower hose. I want my hoses to match. Stupid me forgot to buy new shower hose for the HDD enclosure. Damn. I'll have to buy some more. I'll buy from the same place. S@#$ better match. This stuff isnt cheap.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_1-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_1-800.jpg)

Here's the old hose where I left off. Have to remove them.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_2-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_2-800.jpg)

I have to dremel away the pins I used to fasten the hoses in place.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_3-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_3-800.jpg)

Thats was easy enough.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_4-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_4-800.jpg)

The bracket. I have to make another one of these for the HDD rack.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_5-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_5-800.jpg)

New hose, old hose. The new hose shrinks when its loose while the old hose expands. The new hose is nickel plated brass where the old hose is steel.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_6-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_6-800.jpg)

Have to cut all the new hoses in half.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_7-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_7-800.jpg)

Done. They are all about the same. Some of the hoses are expanding a little bit. Thats why they seem longer.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_8-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_8-800.jpg)

I drill holes in the ends fro the pins. Drill through this hose was easy seeing its brass.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_9-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_9-800.jpg)

Here are some pins I had left over from the last time. It's not enough though. I need more. I made these using the left over stem of a pop rivet.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_10-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_10-800.jpg)

I made them using this mold I made a while ago.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_11-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_11-800.jpg)

Pretty obvious how it works. I clamp it in the vise and smash away!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_12-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_12-800.jpg)

Put the stems in the mold. Make sure they are touching the bottom. Then you clip them like so,...
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_13-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_13-800.jpg)

Like this. Make sure they are not to long. But not to short.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_14-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_14-800.jpg)

Then you smash them in. I wish it was as easy as smashing them in because you cant just smash em in. You have to kind of work them in. Hammering around the tip in circles. Moving is down into the mold. Just smashing it will make it bend over and be all sloppy.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_15-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_15-800.jpg)

Done.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_16-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_16-800.jpg)

Pins in hoses.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_17-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_17-800.jpg)

So cool. Better than tape or glue:)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_18-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_18-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_19-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_19-800.jpg)

I use this in the vise for,...
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_20-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_20-800.jpg)

.

tribaloverkill

10-08-2008, 04:54 PM

This. Now I just hammer in circles aroudn the tip until it forms a mushroom on top locking the hose in place.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_21-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_21-800.jpg)

Like so.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_22-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_22-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_23-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_23-800.jpg)

So damn cool.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_24-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_24-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_25-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_25-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_26-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_26-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_27-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_27-800.jpg)

So whats next? I would like to wire up the PSU but I have to ask. Whats a good PSU these days? For a really beefy computer? Assuming I was able to get some sponsors to donate the latest and greatest,... whats kind of PSU whould I have for all that? I want SLI and the whole nine yards. I have a OCZ 520w PSU right now. What do you think?
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_28-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_28-800.jpg)

In the mean time I think I'll polish this out. It's time.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_29-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_29-800.jpg)

ZAP!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_30-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_30-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_31-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_31-800.jpg)

By far teh best polishing I have done yet. I used ONLY a 5" felt polishing disc on my drill press at 2100rpm with some high gloss polishing compound. I stop at 220grit sanding. Do you know that I was able to polish out 220 marks within seconds with this setup?!?! Seconds!! I could not believe how fast it was! Took no time whatsoever. And it by far did the best polishing I have ever done. I wont be using the table grinder anymore:)
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_32-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_32-800.jpg)

Pump mounting arms. Just installing them for the hell of it. I need new pumps anyways.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_33-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_33-800.jpg)

Polished back panel.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_34-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_34-800.jpg)

Pump covers.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_35-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_35-800.jpg)

Together again. How sick is that!
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_36-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_36-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_37-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_37-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_38-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_38-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_39-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_39-800.jpg)

Seeing that it took no time whatsoever to polish,... its time to repolish all the old stuff.
http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_40-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_40-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_41-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_41-800.jpg) http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_42-180.jpg (http://www.tribaloverkill.com/studio/worklogs/Jan-01-2005_blackout/Oct-08-2008/Oct-08-2008_42-800.jpg)

Blackout's end is near approaching. It's so close that I am not sure as to whether or not I should start seeking hardware. I dont want to get hardware to soon because around here,... s@#$ happens and I dont want to keep the sponsors waiting. Plus I have to figure out what I'm going to do with blackout. I want to keep it as my main processing station because I need a new computer with mucsle for all my pic, video, and 3D modeling. The pc im using now is crap. The thing is that I need to get this thing around so people can see it in person. the sponsors need their exposure. I think I will keep going without hardware for now. Keep doing as much as I can without it all. I still haver to make a reservoir for Blackout too. That I will not reveal until Blackout is completed. I will keep it covered so you cant see:) I have to buy more chrome shower hose, watercooling tube(I can probably get that for free), some micro tactile switches for teh VFD, LCD, and optical drives, I have to buy two new optical drives, I need metal chromed RCA plugs!?!? I think thats what I wanted to get. I will be using those for the LEDS. S@#$ I still need to make brackets to mount all the LEDS. Damn,... ok. I have a lot more to go. Till next time. Which will be soon. I am waiting for the heat shrink tubing to finish Borealis. I need it for Blackout too. Till next time. Peace.