ok, here we go...
I finished doing right side of the turbine tube:
Here is a close up:
Then I moved to the other side:
Here it is finished.
The glow wire on the window side will follow the shape of the window and be concealed by a trim ring. I still have to add a little detail to its surface and I can't install it untill I get it painted:
Speaking of paint. I started to mask off the 3 light bars on the tube. I had to cut a long strip of masking tape to a very thin piece, so I used my stripe cutter from my Airplane modeling days.
here is a piece of mask on the top section:
I finished the other 2 sections with mask and now its ready for paint.
My son's birthday is tomorrow so I probably won't get anything done untill after he goes to bed, So I may or may not have another update tomorrow night.
Later,