-
Re: C&C GDI Powerplant PSU mod
Great looking and concept. +rep. Best of luck for the 2nd round, mate!
-
Re: C&C GDI Powerplant PSU mod
Originally Posted by
Drum Thumper
you tease!
-
Re: C&C GDI Powerplant PSU mod
With two perforated strips and and some pieces of metal ....
.. I made this little ladder ....
Somewhere around here.
Here you see where I attached the power entree and the on/off switch.
Used some wooden sticks...
To make a small girder.
Here they come.
`
And for all the fans and LEDs to be connected, I have a used these connectors.
Last edited by jdbnsn; 03-05-2012 at 01:09 AM.
-
Re: C&C GDI Powerplant PSU mod
lookin good
-
Re: C&C GDI Powerplant PSU mod
Nice.
-
Re: C&C GDI Powerplant PSU mod
Originally Posted by
Drum Thumper
you tease!
-
Re: C&C GDI Powerplant PSU mod
Thanx guys, much appriciated.
Now we are coming rapidly to the end;
Just a small detail in between. This is a door.
Just 12 mm wide, coated with sticky aluminum foil.
Using a real warning decal as an example, I created a mini version for my mini door.
Coated the whole case in a few layers of primerpaint.
Added more details, I first drilled two holes in the cooling tower.
And with some wire and nuts I made a double pipe and mounted it against the tower.
The bottom edge of the fence with black and yellow warning tape.
To "age" the mod, I airbrushed some of the tower surfaces.
To make it more realistic I used this Scotch-Brite to add more weathering.
With sandingpaper and Scotch-brite I tried to make it look more worn.
To try out the electronics, I hotwired the green wire to Earth.
The electricity to the switch soldered and finished with mesh.
The last time the case is open, here you see everything neatly meshed.
Last edited by jdbnsn; 03-05-2012 at 01:11 AM.
-
Re: C&C GDI Powerplant PSU mod
So far this looks amazing! +rep
-
Re: C&C GDI Powerplant PSU mod
looks great!
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules