Honey Roasted Peanuts Ingredients: Salt; Artificial honey roasting agents; Pressed peanut sweepings.
Bod you should get a 9800GTX/GTX+ to run as a single card PhysX engine . I have seen it done before with Tri GTX280's, oh and they were eVGA cards also .
Project: Elegant-Li *NEW*
Project: Alpha FINISHED
Project: LEXA Revival FINISHED
Project: LEXA FINISHED Bit-Tech MOTM Nominee October 08
So I've been trying to see how I can run the tubing to/from the radiators, through the floor and up
to the reservoirs and blocks. Using Sketchup, I went through different configurations, but came
to realize I just don't have enough room under the floor. This is due to a blatant miscalculation on
my part at the very beginning of the build: I simply cut the holes in the side panels too large.
As you can see in this pic, the mesh boxes are so tall, they block the radiator ports.
Even with 90° elbow fittings, I don't think I can make it work.
So, aside from obtaining two more side panels and cutting the holes again, which would mean re-doing all the edging and window cutting,
I have a possible solution, depicted below. The top pics show the mesh boxes as they are now, and the bottom pics show the proposed solution.
What do you guys think? Any other ideas that may work better?
Honey Roasted Peanuts Ingredients: Salt; Artificial honey roasting agents; Pressed peanut sweepings.
I think the second design is a bit better for your waterflow
Arctic Cat * Maximum Security * Cribbage Board * Rockin Case * Armor Redux
Tempest SXR * Power House * Red Comet * ICHIWZ * Acrylic Headphone Hook
Continuing sponsorship support from PCBoard.ca
Yeah I agree. Both ideas would work and the first would be neater (in a way). The second idea would be better for your water flow but you need to make the mesh boxes again .
Project: Elegant-Li *NEW*
Project: Alpha FINISHED
Project: LEXA Revival FINISHED
Project: LEXA FINISHED Bit-Tech MOTM Nominee October 08
could you use something like this`?
http://www.koolance.com/water-coolin...product_id=695
dont have a better idea than that you have i think:/
is that a 120.9 raddy on your case, or are you just happy to see me?
METO V.1
METO V.2
METO V.3
PC-Beto
Project M8 [WIP]
but... i cant help to think. i almost got into trouble cooling my phenom quad, and a single gfx card with a 360 raddy. how are you gonna cool an intel extreme and 3 gpu´s :O honestly i dont think that the 3 raddy´s can handle it:/
is that a 120.9 raddy on your case, or are you just happy to see me?
METO V.1
METO V.2
METO V.3
PC-Beto
Project M8 [WIP]