oh 4*4 isn't so bad at all. I was thinking like 12*12 or something large in that range. In that case I doubt you will need to do much to touch the image up. Laser etching is certainly an option but there is a lot of soft detail there that I think will be lost and it is more expensive. You should try this just for kicks, make two transparencies, one with the heavy details and the other with the shading. Then mount them on opposing sides of a Plexiglas sheet to see if the separation gives the image more depth.
"At the midpoint on the journey of life, I found myself in a dark forest, for the clear path was lost..." -Dante Alighieri
Also, if you're really interested in laser engraving, give TLHarrel a pm, he does a great job and very affordable, especially for 4x4"
It scales up pretty nicely actually, here it is a 4 inches square (roughly).
Here is what you could do to separate the depth...
]
"At the midpoint on the journey of life, I found myself in a dark forest, for the clear path was lost..." -Dante Alighieri
Those look great...
And when I get some money I'll send him a PM. Good lookin out!
Ok here's a pic of the airflow setup.
I know it doesn't make much sense, but it seems to be cooling VERY efficiently. My Athlon 64 x2 4800+ 2.5ghz is overclocked to 2.7ghz (not much, I know, but I don't want to go far due to crap power supply) idles at 26-29C, and under load (iTunes and modern warfare 3) goes up to 36-39C. So not bad temps at all, I think . What say yalls
Looks fine. Thats a normal setup. Front in, back out and top out.
Sweet, thanks. Any possible improvements?
Improvements?
"At the midpoint on the journey of life, I found myself in a dark forest, for the clear path was lost..." -Dante Alighieri