DIY Radiator Stand

[Fuganater]

So I'm going back to the acrylic idea. 1/4" is more than thick enough to handle the weight of the rads. + I will have rad grills made to give it some more strength.

Here are some more pictures.

The new feet. I'm 100% sure these will keep it sanding.

And the cutouts for the rads.

I got replies for the aluminum and just having the main pieces cut will cost over $140 so alu is out.

I just sent some emails to plexi companies to get work done. Hopefully I'll have a reply tomorrow.

Cheers till then.

[Fuganater]

So Delvie's Plastics Inc will cost me roughly $30 in materials and the do NOT have the capability to cut the main piece. I'm still waiting for a reply from Estreetplastics to see what they can do. Worst come to worst I do all the cuts myself.

[Aldersan]

You might have to, judging from the pics. Either way, that's not a bad price and the cutting wouldn't be too difficult if you took your time.

[Fuganater]

I'm gonna order a template from MNPCTECH. They have a nice laser cut reusable template.

Need to get some 3.120 rad grills made now.

[Aldersan]

Talk to TL!

[Fuganater]

Just sent him a PM

[Aldersan]

What kind of design were you thinking for this?

[Fuganater]

I like the MNPCTECH ones. I was thinking something like that but the middle fan grill will say "fugatech-mods" maybe.

[Aldersan]

Ahh I see, should look good!

[TLHarrell]

PDF of grill designs available for you, Fuganater.

Fugatech 3x120mm Radiator Grilles- Test.pdf (Mediafire)

They're printed full scale to a 24"x36" sheet, 6 different designs. You can zoom in on them and print just what's displaying at 100% scale and see exactly what they'll be like when done. Only spent the time to trim up one of them, but you get the idea.

Edit: Pic on the next page.