Tonight, Ive been working the skull,Setting up servos,Adding and change out some cables.Measuring lip wires and eyes with the test skin.
Next weekend will run a new skin.Will setup the oven this weekend.
Thank you Guys
Gary Willett
WILLETTFX
Tonight, Ive been working the skull,Setting up servos,Adding and change out some cables.Measuring lip wires and eyes with the test skin.
Next weekend will run a new skin.Will setup the oven this weekend.
Thank you Guys
Gary Willett
WILLETTFX
AMD 3000 64
MSI K8T NEO
6600GT
1GIG 3200DDR CORSAIR
http://members.tripod.com/garywillettmonsters/index.htm
This week Ive been editing video and looking for my DAM allen wrench LOL.
From start teeth,eyes,sculpt,molding,foam,molding core,casting skull to where am at now 315 mims.
I will edit this 315 down.This is a ruff edit and I have some more to film.
Will run the 3th foam skin this weekend.
Thanks
Gary
AMD 3000 64
MSI K8T NEO
6600GT
1GIG 3200DDR CORSAIR
http://members.tripod.com/garywillettmonsters/index.htm
This is a eyelid test .I like the test so I shot video .
This is only a test with 2nd skin ,The video is short 7 sec.
Click here to watch eyetest06
The 3nd skin will be ran this weekend .
Thanks
Gary
AMD 3000 64
MSI K8T NEO
6600GT
1GIG 3200DDR CORSAIR
http://members.tripod.com/garywillettmonsters/index.htm
Started on the ears this morning , Alot more sculpting to do on them.
These ears will NOT move on the animatronic.
Thanks
gary
AMD 3000 64
MSI K8T NEO
6600GT
1GIG 3200DDR CORSAIR
http://members.tripod.com/garywillettmonsters/index.htm
2 New skins , These skins came out ,Great!!!
Saturday skin
Sunday skin
Foam Rubber
337 gms. base 337
67 grams foaming agent 404
33 grams curing agent 437
30 grams flow 467
24 grams gelling agent
4 gram ammonia
9:30 mims
1. Speed #1 - 1 minute (to blend all components)
2. Speed #12 - 3 minutes : blend all 8:30 ADD 4 gram ammonia
3. Speed #3 - 4 minutes : refine
4. Speed #1 - 30 seconds : refine
5. Speed #1 - 30 seconds : ADD GELLING AGENT (take the full 30 seconds)
6. Speed #1 - 30 seconds : Backturn the bowl
7 loaded mold
8 gelled in 8 mims.
Thanks
Gary
AMD 3000 64
MSI K8T NEO
6600GT
1GIG 3200DDR CORSAIR
http://members.tripod.com/garywillettmonsters/index.htm
AMD 3000 64
MSI K8T NEO
6600GT
1GIG 3200DDR CORSAIR
http://members.tripod.com/garywillettmonsters/index.htm
Thanks Guys
Gary
AMD 3000 64
MSI K8T NEO
6600GT
1GIG 3200DDR CORSAIR
http://members.tripod.com/garywillettmonsters/index.htm
The support pipe is also be used to thread the power and controller cable inside the pipe.
I dont know yet if its going to be this high. The computer case will be below and
the support pipe will be painted flat black. This will give me the floating head effect over the case.
Testing the skin.
There is work to do on the skull , Making sure everything is right.Will be a computer test movement on the 1st
floor sevros ,Then the 2nd floor servos and then the skin will be painted and fitted on the skull.Then ear work & hair work.
Been working with some sound software for its voice. I think you guys are going to like it.
More later
Gary
AMD 3000 64
MSI K8T NEO
6600GT
1GIG 3200DDR CORSAIR
http://members.tripod.com/garywillettmonsters/index.htm
Sound FX test My Animatronic project's Voice
This is my voice with sound software .
Click here to watch TBCSvoice-animatronic-test
gary
AMD 3000 64
MSI K8T NEO
6600GT
1GIG 3200DDR CORSAIR
http://members.tripod.com/garywillettmonsters/index.htm
1st FLOOR-SERVOS MOVEMENT TEST
Click here to watch Animatronic-Test-110506-1st-FLOOR-SERVOS
Well , What do you guys think?
Thanks
Gary
AMD 3000 64
MSI K8T NEO
6600GT
1GIG 3200DDR CORSAIR
http://members.tripod.com/garywillettmonsters/index.htm