Acrylic Case PC & 360

[j00 60t PwN3d]

Hi, I just want an opinion on what you guys think of my first finished projects.
The picture of my computer is kind of old and it looks a little bit better now, I cleaned up all the wires and added the WD Raptor and a DVD-RW Drive. Thanks.

[p0Pe]

what have you done to it, what have you moddet, and would you plz post some more pics.. cant see much on thoose.

otherwise looks ok, hope to se more pics

[Collinstheclown]

Looks like a clear Xbox360 case with red talismoon fans, or the red twilight flow, with red ROL. Looks very nice, good job.

Also looks to be a very red PC in an acrylic case. Me thinks you need a bit of cable management in there. Otherwise good job. I also have the red Saitek, good KB.




-CollinstheClown

[Mitternacht]

Welcome to the forums.

You have the Samsung drive in that 360, now I'm jealous. They have better covers than the Hitachi drives. Looks good though.

I have my own 360 Elite mod, Drei sechzig.

[j00 60t PwN3d]

I decided to change the way my PC is being cooled, I ordered a lot of new stuff. I should have it next week, so I will post some pictures next weekend. There should be about 540 cubic feet of air being moved inside my case every minute once I am done with it. There will be only 5 or 6 fans on when I turn on my computer and the other ten or so will be remote controlled. So if I will be just browsing the web it will be nice and quiet, and when I am playing a game all the fans will turn on for maximum cooling at 540 CFM.

* * * THE RED BEAST * * *

HARDWARE
Asus P5LD2-VM Motherboard
Asus PhysX P1 Processing Unit
Intel Pentium D 830 3.0GHz (Overclocked to 3.3GHz)
Western Digital Raptor Hard Drive (36GB, 10,000 RPM, 16MB, SATA-150)
4 x Corsair 1024MB DDR2 667MHz Memory (4096MB)
XG Vortec 600 Watt Power Supply (100% Aluminum Alloy Housing)
XFX GeForce 7600 GT Fatal1ty (4 Heatpipes, 36 Fins, Aluminum Heatsink)

COOLING
4 x Ultra Aluminum Memory Cooler
6 x 80mm Aluminum Mesh Fan Filter
8 x Thermaltake Forged Copper BGA Heatsink
8 x Zalman Aluminum VGA RAM Heatsink
Thermal CPU Heatsink Fan Duct
Zalman Copper VGA Heatsink (100% Copper, 2 Heatpipes, 160 Fins, 80mm Fan, 39 CFM)
Zalman Aluminum Hard Drive Cooler with 11 Heatpipes
Zalman Aluminum Northbridge Chipset Heatsink with 20 Fins
Thermaltake Tower 112 CPU Heatsink (100% Copper, 59 Fins, 6 Heatpipes)
5 x 80mm UV Red Translucent Fan - 32.5 CFM (162.5 CFM)
2 x 80mm Vantec Tornado Fan - 84.1 CFM (168.2 CFM)
1 x 120mm UV Red Translucent Fan - 84.3 CFM
Vantec Spectrum PCI Fan Card - 29.5 CFM
Corsair Dominator Memory Airflow Fan - 28.2 CFM
Ever Cool Hard Drive Cooler - 28.3 CFM

TOTAL: 540 CFM, 275 Fins, 23 Heatpipes, 20 Heatsinks, 16 Fans

[j00 60t PwN3d]

It's all done. The remote turns on one of the vantec tornado fans, a second fan in the back, and the cold cathode light. I organized my wires the best I could but everything is such a tight fit that I cant even stick my hand in there anymore. I should have gotten a full sized case. Also the pictures after the remote show you what gets turned on with it.

[Darth Dad]

How about some pics with room lights turned on. I can't see whats going on in there...

[Gun Down]

From what i can see looks good some pics with the lights on would help though

[j00 60t PwN3d]

I took a couple of pictures with the lights on but it is even harder to see what is going on. I figured I will post them anyway.

[killergamer]

How did you put so many fans on your computer? And it is sweet! Lovin the orange