ATI tools can be used on nvidia cards?
[edit]
Dumb question... N/M..
Spawn, do you WC?
ATI tools can be used on nvidia cards?
[edit]
Dumb question... N/M..
Spawn, do you WC?
yes ati tool can be used on both, great program.
no i don't w/c... yet. in march once i get inheritance i plan on w/c'ing and upgrading to a q6600 and a 8800ultra or a second 8600GT.
for now i have a Arctic Cooling Accelero S2 on the video card and Arctic Cooling Freezer 7 pro on the cpu, both lapped and the cpu is too.
CPU: Q6600 G0 3.5GHz@1.4v (4.2GHz max) / 4790k 4.8ghz @1.265v
GPU: 9800GTX /GTX780 hydrocopper
Ram: Samsung 4GB /gskill 16gb DDR3 1600
Mobo: EVGA-NF68-A1 680i (P32) /AsRock Extreme6
PSU: Enermax Galaxy 850Watt /EVGA 850 G2
HDD: OCZ 120GB Vertex4, Samsung evo 840 250GB
LCD: Samsung 32" LN32A450, Samsung 226BW 22" wide
Sound: Logtiech Z 5500
CPU & GPU: 3x Swiftech MCR320, 2x MCP655, MCW60 R2, Dtek Fuzion V2, 18 high speed yates @ 5v
cool spec's guys...here is a screenshot of my xblade details for CPUZ and Tech powerup -
when i get the time i'll also to do the aquamark shyt...
Pushed this new Phenom X3 a little bit.
Current Setup:
Stock HSF
AMD Phenom X3 8650 @ 2.3 GHz
8800GTS and 8200 in SLi
2 WD 160 GB SATA Harddrivesi in RAID_0
MSI K9N2G
550 watt Rosewill PSU
Coffee is love, coffee is life.
This is what i just put together only 3 days ago. I'm pretty happy with it. gonna see if i can get 4.5 stable next. so far, 4.4ghz is rock stable, no errors, and a max full load of 59C using Coretemp. Idles around 30C. (core #0 26C/core #1 34C)
EDIT: Tried 4.5, but wont go stable unless i up voltage to 1.4 area, and then my full load temps go up to 65C. And that was only after about 10 mins of orthos. I just stopped it and lowered the clocks.
CPU : Core 2 Duo E8400 3.00ghz @ 4.42ghz 1.376v
Motherboard : ASUS P5Q PRO P45
Memory : 4GB (2x2GB) Corsair Dominator XMS2X4096 DDR2-1066 PC8500 @ 1040mhz 2.1v
Graphics Card : eVGA 8800GTS 512MB G92 670/972 @ 745/1050
Hard Drive : WD Caviar Black 500Gb 32mb cache
Sound Card : Creative SB X-Fi Xtreme Audio
Power Supply : Gigabyte Odin GT 550
Case : Modded Thermaltake Tsunami Dream
CPU cooling : Thermalright Ultra 120 With PWM arctic cooling 120mm fan
UPDATED: Lowered Mutli, Upped FSB. Running ram @ 1:1 fsb, 1040mhz. Temps went up a bit with a little more volts, but still below 60c full load with 2 instances of orthos running. Idle at 32C average for both cores.
Will post 3dmarkVantage screenie soon too.
Stressed using Gromacs core since I'm using vista and its buggy as crap. I'll update it when i get it going properly.
Am i missing any proof? or is this enough?
Last edited by bartvandenberg; 01-17-2009 at 11:47 PM.
CPU : Core 2 Quad 6600 GO revision 1.225 VID 2.40ghz @ 3.551ghz 1.280 volts
Motherboard : ASUS P5Q PRO P45
Memory : 4GB (2x2GB) Kingston Hyperx T1 DDR2-1066 PC8500 @ 1110mhz 2.2v
Graphics Card : eVGA GTX260 Core 216 896mb 576/999 @ 700/1105
Hard Drive : WD Caviar Black 500Gb 32mb cache
Sound Card : Creative SB X-Fi Xtreme Audio
Power Supply : Gigabyte Odin GT 550
Case : Modded Thermaltake Tsunami Dream
CPU cooling : Thermalright Ultra 120 Extreme With Antec tricool 120mm
This is my "newer" setup. Old ram is gettin RMA's, and my old E8400 went into my wifes computer.
Prime 95 stable for 8 hours last pass, no errors. 8 passes of memtest - no errors. This overclock is as stable as stock.
Idle temp between 28-31C, full load around 57-60C
FSB @ 444 x 8
10:8 divider on ram
NB voltage at 1.4
The pic is after only an hour of prime. I forgot to take a screenshot this morning.
you NEED to water cool that q6600 and get it to 4GHz and more!
CPU: Q6600 G0 3.5GHz@1.4v (4.2GHz max) / 4790k 4.8ghz @1.265v
GPU: 9800GTX /GTX780 hydrocopper
Ram: Samsung 4GB /gskill 16gb DDR3 1600
Mobo: EVGA-NF68-A1 680i (P32) /AsRock Extreme6
PSU: Enermax Galaxy 850Watt /EVGA 850 G2
HDD: OCZ 120GB Vertex4, Samsung evo 840 250GB
LCD: Samsung 32" LN32A450, Samsung 226BW 22" wide
Sound: Logtiech Z 5500
CPU & GPU: 3x Swiftech MCR320, 2x MCP655, MCW60 R2, Dtek Fuzion V2, 18 high speed yates @ 5v
i'll watercool mine, if you watercool yours.
My chip hits a wall at 3.6 i think. at least at safe voltage it does. I can get it stable at that, but then my ram is unstable overclocked, or underclocked.
Anything over 3.6, no matter how i do it, is only prime stable for 20 mins tops, before i start getting errors, or BSOD's.
Im happy with my 3.5 out of my free q6600.
CPU: Q6600 G0 3.5GHz@1.4v (4.2GHz max) / 4790k 4.8ghz @1.265v
GPU: 9800GTX /GTX780 hydrocopper
Ram: Samsung 4GB /gskill 16gb DDR3 1600
Mobo: EVGA-NF68-A1 680i (P32) /AsRock Extreme6
PSU: Enermax Galaxy 850Watt /EVGA 850 G2
HDD: OCZ 120GB Vertex4, Samsung evo 840 250GB
LCD: Samsung 32" LN32A450, Samsung 226BW 22" wide
Sound: Logtiech Z 5500
CPU & GPU: 3x Swiftech MCR320, 2x MCP655, MCW60 R2, Dtek Fuzion V2, 18 high speed yates @ 5v
haha.. nice setup. ok, i wont watercool mine. i dont have the money to do that.
I have to work all day so my wife can spend all day. pretty crappy agreement we have, but at least she cooks for me.
Did i mention, i got my q6600 for free?