Page 6 of 6 FirstFirst 123456
Results 51 to 60 of 60

Thread: Ammo Box 360

  1. #51
    Anodized ozzylow's Avatar
    Join Date
    Jul 2010
    Location
    Sydney
    Posts
    51

    Default Re: Ammo Box 360

    Today's Update



    Uploaded with ImageShack.us

    I was looking at ordering the stickers for the sides and other small things, comes out to be $54 which im not wanting to spend that on it, i dont think it will look to originsl either, so i decided i will go with the stencil. Easier said then done.

    First i tried to cut out the text carefully with a razor blade, definatly time consuming cutting these letters out on a piece of paper. Only cut a few letters out just to test and see how it works



    Uploaded with ImageShack.us

    Set it up and taped it ( progress shot, i did alot more prep work then this )


    Uploaded with ImageShack.us

    I like this look a lot over the stickers, i think they would keep making these ammo boxes looking too new, so im definatly going the stencil way, just not going to spend hours on cutting these letters, numbers and shapes out of paper, too time consuming



    Uploaded with ImageShack.us

    So i have decided to go with just buying a stencil tomorrow and seeing how this will turn out



    Uploaded with ImageShack.us

    I will go with the smaller stencils. 10mm high letters

    Have now taped up the bottom box with even spacing so i can get onto the stencils tomorrow and hopefully have some more progress to show.



    Uploaded with ImageShack.us

  2. #52
    ATX Mental Case licenseless's Avatar
    Join Date
    May 2011
    Location
    Okinawa Japan
    Posts
    101

    Default Re: Ammo Box 360

    LOVE IT BRO... coming from a military back ground i dont know why the heck i didnt think of this before hahahahah

  3. #53
    Anodized ozzylow's Avatar
    Join Date
    Jul 2010
    Location
    Sydney
    Posts
    51

    Default Re: Ammo Box 360

    Went out and bought the stencil that i needed, came in a pack of 10mm and 20mm. I went with the 20mm becuase the 10 was too small and not noticable enough, is larger then original but still looks good.



    Uploaded with ImageShack.us

    Test section on the bottom box



    Uploaded with ImageShack.us



    Uploaded with ImageShack.us



    Uploaded with ImageShack.us

    Coming out really nice, im happy that i went with the stencils, the stickers would of not looked nice at all. Stencil looks authentic



    Uploaded with ImageShack.us

  4. #54
    Overclocked BS Mods's Avatar
    Join Date
    Feb 2010
    Location
    Union Washington
    Posts
    333

    Default Re: Ammo Box 360

    That looks right on the money. The stenciling was the only way to go. It's looking awesome!
    Life is tough, it's even tougher when you're stupid. - John Wayne

  5. #55
    A.B. normal msmrx57's Avatar
    Join Date
    Jan 2008
    Location
    Western Wisconsin
    Posts
    1,602

    Default Re: Ammo Box 360

    Looks awesome!
    Quote Originally Posted by SXRguyinMA View Post
    Now, off to the basement to do some fiddling with the rods and such.
    so far left of center i'm in right field

  6. #56
    Anodized ozzylow's Avatar
    Join Date
    Jul 2010
    Location
    Sydney
    Posts
    51

    Default Re: Ammo Box 360

    Updates

    Finishing off the stencil work on the bottom box, i decided to leave all over spray and small marks on it, it definatly adds to the effect of the ammo boxes. Starting to get close to finishing this case.





    Uploaded with ImageShack.us

    Some more shots of the case.



    Uploaded with ImageShack.us



    Uploaded with ImageShack.us

  7. #57
    Anodized ozzylow's Avatar
    Join Date
    Jul 2010
    Location
    Sydney
    Posts
    51

    Default Re: Ammo Box 360

    Time for some more updates have been busy with other things recently.

    Just installing the newest dashboard by USB some reason its connection to Xbox Live but not wanting to update properly .

    Found out with the disc drive sitting up the way it is, it does not like having no disc in it. Small noise comes from the disc drive when it tries to spin up a disc when nothing is in there. never noticed it before. Shouldnt be a problem, I don't usually take games out and not replace with another one.

    Going to re wire the buttons at the back tomorrow, just to hard to unplug them the way they are. Wires are all crossed over so it makes a bit of a hassel. Need a Male to Female USB all so.

    Recently got a Full HD Video Camera so i will get some video up in the next day or so, time to see it in action.

    Couldnt see this taking much more then a couple of days to complete. The on to the next mod, im thingink Xbox 360 Slim Portable ( Laptop ) or Water Cool the Slim in a small Micro ATX Computer Case or HTPC. Getting ideas together for that and will have a new topic once the planning goes ahead

    Just another picture


  8. #58
    Anodized ozzylow's Avatar
    Join Date
    Jul 2010
    Location
    Sydney
    Posts
    51

    Default Re: Ammo Box 360

    Sorry about the lack of updates, been extreamly busy. Has been an extreamly busy 14 months. Got engaged, married and now having a baby in that space of time.

    I will take some better final photos to complete the project, nicer location and ill get some Army supplies and props to make a nice photoshoot. It will be the perfect way to finish the build off, i wouldnt know how much money i have put into this build now, it doesnt really matter, im happy with how it has all turned out, i learnt a tonne of things, never worked with this kind of stuff before and i taught myself a lot of it myself.

    What do you think people, Ammo Box 360 finished. Till Photoshoot




  9. #59
    Anodized ozzylow's Avatar
    Join Date
    Jul 2010
    Location
    Sydney
    Posts
    51

    Default Re: Ammo Box 360

    Finally got a video up, will be posting up some more.

    <iframe width="420" height="315" src="http://www.youtube.com/embed/tH81drVCWx8" frameborder="0" allowfullscreen></iframe>

    http://youtu.be/tH81drVCWx8

  10. #60
    100% Recycled Pixels. Twigsoffury's Avatar
    Join Date
    Jan 2006
    Location
    Oklahoma city
    Posts
    2,017

    Default Re: Ammo Box 360

    Quote Originally Posted by ozzylow View Post
    Finally got a video up, will be posting up some more.


    (fixed your HTML for you)

    : ) sweet xbox

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •