Ey guys!
New project on the starting steps now, hopefully gotten some more experience since last time, and going into this one with all my "might"
Current pic
-Sponsors-
THX ALOT to these guys, they are making this project possible !
OCZ
AMD
Anfi-Tech
Spinnin Wheel
Netshop
EK waterblocks
-Goals-
I would like to develop my previous design, lots of hot air was blown directly onto other components last time, thats gonna change, all the disks will go in the middle module, while the main comps stay in their own on top and bottom, there will be no more "PSU in the top right corner" type of thing, got OCZ on the team this time, and they will provide some awesome custom powersupplies for this project
to sum it up :
* 3 mobo slots (gonna get in a mATX instead of the mITX)
* seperate disk case
* seperate comp case
* watercooled cpu's/gpu's
* TO HELL WITH PLEXI, god i hate that material...
* YES to andonized, cnc'ed alu
* fully welded alu frame
-hardware-
PC1 :
MSI 790FX-GD70 AM3
AMD Phenom II 955
8 GB OCZ FlexX DDR3
Radeon 4870x2
910w Silencer PC Power&Cooling
PC2 :
MSI 790FX-GD70 AM3
AMD Phenom II 955
8 GB OCZ FlexX DDR3
Radeon 4870x2
910w Silencer PC Power&Cooling
PC3 :
Asus M3A78-T AM2
AMD Phenom II 955
8 GB OCZ FlexX
Radeon 4870x2
910w Silencer PC Power&Cooling
Harddrives :
6 x : WD500GB, 7200rpm, IDE
16 x : WD500GB, 7200rpm, SATA
8 x : WD750GB, 7200rpm, SATA
4 x : WD1000GB, 7200rpm, SATA
2 x : WD1000GB, 7200rpm, E-SATA
4 x : SG80gb, 15000rpm, SAS
4 x : Seagate 1.5TB, 7200rpm, SATA
Watercooling loop1 - Mainrig, gfx :
OCZ Hydroflow cpu blocks
EK 4870x2 and 4870 gfx blocks
1/2" hosing
Iwaki MD15 pump
4x 360 rad's
A new day, a new set of renders !
consept art
Gonna post up some early renders on some thoughts and ideas this time around, feel free to contribute with ideas, they are greatly needed, as this is only the basic design without any awesome looking stuff
Getting late at my place, gonna do a proper writeup tomorrow =)
Stay tuned! ^^