Mjolnir is born....

[Mach]

Very interested to see how the powder coating turns out. Keep it up!

[BerticusPryme]

well guys even with a screwed up knee (slight dislocation yesterday)I have managed to tough it out and get some peices primed early this morning and some of the gunmetal layed down today. Also I figured out something. I can screw up bondo. DOnt know what I did or how I did it but I f'ed up bondo. But my mad elite modding skills I learned hwo to unbondo. Yes you heard me and i have proof.
Everything primed

Everything painted

Close up of the color i chose.It's called storm grey by duplicolor.Picked it up at the local Autozone

and last but not least my sad attempt at bondo and the picture after that shows my mad unbondoing skill

Let me know what ya think thus far. Maybe some more updates later tonight after the clear coat

[Mach]

Fell out or wasn't dry? I do like the color. Should really look good next to the powder coat.

[BerticusPryme]

oh no it was hard as a rock in there. It cracked on the outside edge so I took a hammer and a screwdriver to it. put the screwdriver int he port holes and went to town witha hammer and it worked. hehehe

[nevermind1534]

It looks good.

well guys even with a screwed up knee (slight dislocation yesterday)

That's supposed to hurt a lot, although you're still good enough to mod, I see.

[PartyLikeARockstar]

well guys even with a screwed up knee (slight dislocation yesterday)I have managed to tough it out and get some peices primed early this morning and some of the gunmetal layed down today. Also I figured out something. I can screw up bondo. DOnt know what I did or how I did it but I f'ed up bondo. But my mad elite modding skills I learned hwo to unbondo. Yes you heard me and i have proof.
Everything primed

Everything painted

Close up of the color i chose.It's called storm grey by duplicolor.Picked it up at the local Autozone

and last but not least my sad attempt at bondo and the picture after that shows my mad unbondoing skill

Let me know what ya think thus far. Maybe some more updates later tonight after the clear coat

nice un-bondo job! you'd be like....Defyant's arch rival!

[BerticusPryme]

Well guys not much of an update I got the paint finished and it is doing the last bit of drying now. Going to clear it sometime tomorrow morning and hopefully get started on the plexi work if the parts come in. But here are the pics of the parts now dried.
flash

no flash

Will hopefulyl have more updates tomorrow

[PartyLikeARockstar]

that is great great color! nice!

[p0Pe]

yeah! nice paint job will be a neat coulor for that case

[BerticusPryme]

Well the paint is dried and the clear is finishing the curing process. Here is all the peices cleared and about 70% dry. There is a few outisde pics and some inside pics. Sorry camera sucks cuz the pics do not do it justice. They really dont.
Everything is done

Outside gloss check

Inside gloss check

and it makes me happy to say none of these were taken with a flash.