Project: Terminator

[SXRguyinMA]

nice work, cant wait to see the updated version

[Remy]

I love Terminator man, I think this mod is great. If I may make a suggestion? Perhaps instead of using wood, maybe you should try square aluminum tubing or aluminum U channel. Just a thought...

Love what you've done so far though. Keep it up!

Remy

[THRASHER2]

I love anything that has to do with the Terminator

[Frenkie]

I love anything that has to do with the Terminator

Yeah! Do you have such a DVD player? Looks soooo cool.

To connect the cyborg hand to the arm, I have devised a wrist connection.
On the one side, there are 5 fingers.

On the other side are 4 connections for the arm.

From sheet aluminum plate I made two wrist pieces.

Here are 5 large screws for the finger sticks.

Here are the 5 sticks attached to the screws and the 4 large bolts for the arms.

Bended, the bottom view.

And from the top view.

All fingers are attached.

I must still do a bit of touchup, but they look much better now like the terminator example.

To make it look even better, I got me some carressorierings.

I stuck the rings on the side of the phalanx.

On the rightside of the case, i am mounting a hand which holds a SF gun.
This one is from the Aktion shop, and cost almost nothing.

My friend Giel provided me with this slick laserpointer-pen.

Inside is this very tiny laser module.

Soldered some wires to it.

And mounted the whole thing inside the gun-optics-barrel.

Mounted the right hand to the gun.

And made some final smaller adjustments and paints.

[The boy 4rm oz]

Now that is cool. +rep

[Remy]

I take back what I said about using aluminum. That looks great man. +rep!

[Ichbin]

I was wondering how in the hell someone was gonna mod a case like that...GREAT CREATIVITY

Shnazzy

[DonT-FeaR]

wow those new hands look really really sweet

[Frenkie]

Time to show some of the skull. From the Aktion Store I got these two LED keychains, in the form of a light bulb (you know, grandma used these) They have exactly the good dimensions for eyeballs

With the Dremel, I made the holes in the eyes a bit bigger.

Here they sit neatly side by side.

The cool blue LEDs go off and in go two high-Brite red LEDs.

Bare LEDs

In the pear-shaped Aktion housings.

Off.

and on.

If we now look at various internet photos, you'll see quite a difference, you see only the front emittes light.

I was a time to think and experiment how I would get that. I decided to use sticky aluminum foil.

first cut out holes.

Then right on the center of the eyeball and cuts along the edge.

than apply the foil around the eyeball.

And then they look like this...

[msmrx57]

WOW!!!!! wipes drool from chin.... That is gonna look out of this world. Well technically out of this time frame anyway. I would have been lazy and tried paint on the eyes, but that foil woks so much better. +rep Looking forward to more progress on this fro sure.