That's a really cool LED setup, you got a link mate, I am very interested in getting some.
That's a really cool LED setup, you got a link mate, I am very interested in getting some.
Project: Elegant-Li *NEW*
Project: Alpha FINISHED
Project: LEXA Revival FINISHED
Project: LEXA FINISHED Bit-Tech MOTM Nominee October 08
Honey Roasted Peanuts Ingredients: Salt; Artificial honey roasting agents; Pressed peanut sweepings.
Cheers mate, I really wanna get some.
Project: Elegant-Li *NEW*
Project: Alpha FINISHED
Project: LEXA Revival FINISHED
Project: LEXA FINISHED Bit-Tech MOTM Nominee October 08
Almost done!On the home stretch now. Got the last couple of items painted, and the loops filled. woot!
Before I could finalize the tubing, I had to paint the tubing guides. So I did that while I was doing some last minute cabling.
Here's a wide shot of everything so far with the guides on. I swapped out those silver sata cables for some UV blue ones.
Here's a close up shot of the lower rad compartment. Don't even ask me how I managed to hook it all up lol!
(no, really. I don't remember.)
Upper main compartment with guides:
Close up shot of the T3 side:
Close up shot of the component side:
Finally I get to fill the system! I carefully turned the case onto its back and started filling. First the CPU loop:
Next is the NB/SB & middle video card loop:
Lastly, the loop for the two remaining video cards:
All three T3's filled and ready to go! I used a spare psu to cycle the pumps, bleed all the air out, and check for leaks under pressure.
Money shot of the floor with all three shades of coolant flowing through it:
And finally an overall shot:
I did have a few leaks I needed to address, but nothing catastrophic (which is actually amazing considering how many
fittings I'm using lol). I just have a few final items to address, then I can call this thing D-O-N-E.
![]()
Honey Roasted Peanuts Ingredients: Salt; Artificial honey roasting agents; Pressed peanut sweepings.
Whoooooo..... you got me speechless.
Still I would like to know your temps on the dual gfx loop.
Thumps up plus rep deff.......
looks incredible!!
![]()
Arctic Cat * Maximum Security * Cribbage Board * Rockin Case * Armor Redux
Tempest SXR * Power House * Red Comet * ICHIWZ * Acrylic Headphone Hook
Continuing sponsorship support from PCBoard.ca
Just absolutely unreal. I really don't know what to say, it's almost TOO amazing, keep up the god-like work
Absolutely speechless! Every time I think you've done the impossible, you keep one up yourself. Amazing!
Read through this whole thread the other day and just wanted to say that the floor is absolutely spectacular. I really think it is the centerpiece of this whole case, I've never seen anything like it. It's even more stunning now that you have it filled with coolant.
Great work!