USS EURISKO - Intrepid Mark II Class

[DynamoNED]

I would call this case mod epic, but that term is insufficient to describe it. Suffice it to say that I'm really liking what I'm seeing. +rep and +sub.

P.S. I'm loving your idea of turning the Sentry LXE remote into a TNG datapad. All I can say is, "Engage!"

[ASPHIAX]

Huge rep. Everyone do the same now!

Just visited your site, OH ... MY ... GOD !!! Words just doesnt describe it.
I will spend weeks going through your worklogs as the work you are displaying is completely out of this world!

Thansk for the +rep! Coming from you it means a lot!
(not that +rep from anyone else doesnt mean a thing, dont get me wrong!!!)

The evolution of your builds is very visible (if the list of mods on your site chronological from shattered to diablo) from cases to non-conventionals.

Me , I just like dreaming up stuff and then building it. (2 appartements and a 3 story house and now computers, lol!)

Love your Commodore P.E.T build. Out of the box, clean, iconic, Briljant!

Thanks for your reply man !
ASPHIAX

[AmEv]

Me? I've got a bunch of builds, and in dire need of parts and funding.

You've inspired me.

+r.

[ASPHIAX]

I would call this case mod epic, but that term is insufficient to describe it. Suffice it to say that I'm really liking what I'm seeing. +rep and +sub.

P.S. I'm loving your idea of turning the Sentry LXE remote into a TNG datapad. All I can say is, "Engage!"

Thank you! I am hoping to get some work done today on the pylons and warp nacelles. Snowboarding just doesnt beat modding! Lol!

[ASPHIAX]

Me? I've got a bunch of builds, and in dire need of parts and funding.

You've inspired me.

+r.

You have definately got a bunch of builds! Great work there!
Hope my work will continue to offer some idea's!
Thanks!

[ASPHIAX]

Here is a short update:
It is good to take a break from the build every once and again. Left the build for a good week to come back and find several issues with the design that I didn't see before. So I spend the most part of the day with the dremel taking of milimeter by milimeter certain elements of the tail to make the "flow" of the design better. There was a 3 mm thick layer of dust in the room when I finished but its done now and I am happy with it!

Last time when I hooked up the tubing to the warp nacelle it looked like this:

The white coil only just prevented the tube from folding too much so no coolant would be able to flow through. Obviously not a good solution. Take this restriction times 4 (2 per nacelles) and the single pump would definately not be enough umpff to make the ship fly any harder then warp 1,1. Back to the drawing board it is. What would make a perfect 180 degree turn and do that within 4 cm ?
Contacted Bitspower to ask for the heart to heart measurements of their snake fitting. Could not find the deatils anywhere.
Bitspower descided after seeing the buildlogs to send me a box with all different types of fittings, connectors, converters and what not to help me out. How extremely cool of them ! Looks like there are a lot of old trekkies around !

Tehy are all from the Black Sparcle Series ...

So now with the new fittings it looks like this :

PS. the yellow tape is to ensure the plexi doesnt get scratched

Looks a whole lot better al ready. No more restriction in the tubing which also doesnt want to press outwards by the strong curvature in the old solution.

This week will start the foam work encapsulating the nacelles and place the led array.
No small job .. (but so much fun!!!)
Laterz
ASPHIAX

[ASPHIAX]

Well I Guess its official now !!!

Mod - Of - The - Month FEB 2011 Winner : USS EURISKO Intrepid Mark II Class

It was very close but with 6 votes the EURISKO came out victorious and looking at the quality of the competition it is most humbling ...

I would like to thank everyone who voted Gave mental support and helped with tips, tricks and suggestions !!!
Couldn't have done it without you !!!

Grt
ASPHIAX

PS: And now back to modding !!!

[msmrx57]

Congrats!! Guess now your wife should know it's worth the mess.

[ASPHIAX]

Just a dinner and a show to make it complete and I will be set for at least a couple of builds, LOL !!!
Thansk man !

[ASPHIAX]

Here is another update :

The Deflector Tunnel!
So, What do we have to do here. Fit the MDF PSU casing into the tunnel, fit the HDD drive cage with 2 HDD's and a SSD, fit the Laing DDC pump and add a 92mm fan for the HDD cooling.

Here is an upside down picture for explanation. After a tip from The Boiler I incorporated a structural element that will make attaching the case to the standard far more easy.
The MDF PSU casing has been raised for a couple of cm's making it stick out under the case. This will make it fit into a slot in the to be build standard and when everything is neatly airbrushed the model will seem to float 1,5 cm's above the standard (well thats the idea at least, LOL)

A little jump forwards, I was so busy I forgot to take pictures! I cut the raised casing out of the foam and sunk the HDD cage into it. Also added some structural elements to make it more stiff.

The foam "behind" the HDD cage has been removed to allow a 92mm fan to be placed pushing the air out of the tail section. So cool air is coming in through the raised PSU casing and pushed out through the tail-fan

Enough room for all the cables, esspecially when they have all been made to perfect length ;-)

I only have to move the pwr connector and switch to the back. A bit sorry to have to void the 5 year warranty on a PSU that has been in my posession for less than a day. Oh well, all part of the game right !?!

Put everything into the epoxy/glassfiber and put some additional layers where the tubing willenter the tail and where the fan will be cut out.

Here for the tubing :

Gonna drop by the hobbyshop tomorrow for some hinges to make the pylons and warp nacelles move up and down.
Laters
ASPHIAX