Basic CS Mod

[gaz_the_chav]

Messing with ammunition is a serious thing

You only really got one thing right in that post and that is that messing with ammo is extremely dangrous SO DON'T DO IT!!!!

What rounds are you using????

-gaz

[simon275]

All the bullets I have are not live rounds they have had powder, primer and all that stuff removed they look like real bullets but if you put them in a gun nothing happens. I dont have the guts to buy real bullets and pull them apart myself apart from the fact I dont have a gun lisence.

I have a few 50cal rounds but I want to get some deactived 9mm rounds.

[Maz]

wow guns are actually quite safe if you know what you are doing. i had someone buy me a 20Ga shottie with money i saved up when i was 14...

actually i dont know about the whole motor oil thing, maybe im just a little bit hick. we threw suspected duds into a bondfire (powder+rounds removed)

FOR THE 9 mm

the bullet puller does work great
however i actually suggest you buy the cases and the bullets and put them together (usually a tight fit but if you sand a little off the bullet...) dont screw around with **** if the only thing you know about it is that it is dangerous

[podpet24]

You could just use some casings. Make it look like your comp fired out the rounds and the casings just fell onto the bottom of it.

[Vertigo]

Dual Monitors, yeah I'm going with a pair of 920n Samsung Syncmasters in my current build, I plan on a second PC that's largely a workhorse with a KVM switch and a 3rd Samsung monitor (x3 19 inch monitors) But thanks for the link to the wrap around screens, pretty useful site. I've got another build I'm making for a friend I might use that on.

[simon275]

You could just use some casings. Make it look like your comp fired out the rounds and the casings just fell onto the bottom of it.

Nice idea thanks.

I am gonna go to either a nearby gun store or firing range and ask for spent or decomisoned rounds.

I swear this has turned into a worklog plus a thread on dual screen montior tips.

I AM HAPPY TO HELP

[ajmilton]

You could just use some casings. Make it look like your comp fired out the rounds and the casings just fell onto the bottom of it.

that's not a bad idea. maybe use some thin plexi rods to hold some casings off the side of the case to look like they're falling or something. maybe find one of those smoke machines like the doom3 mod has, have some smoke piped to come out of the casings that are on the ground.
that could be fun

[simon275]

That would be scik but fair expensive. I got my scope today it's fair baddass some courier turned up while I was eating breakfast at 7:30 . Like I can look into someones window a block away and watch their televison. Fair nuts. I just finished the first of my six final exams for highschool. The exams are spread out so 18 sleeps away and I am done and then the modding will get serious.

[ajmilton]

i don't think it'd be all that expensive. i'll poke around and see if i can find the link from that worklog, paul posted some info about where to get the smoker thing

the idea just sounds neat to me

[simon275]

i don't think it'd be all that expensive. i'll poke around and see if i can find the link from that worklog, paul posted some info about where to get the smoker thing

the idea just sounds neat to me

Thanks man let me know if you find it.