Project: Woody by zwiks

[zwiks]

Hey my name is Mads R, and im 15 years old. Im comming for a little country called Denmark.
This is my first serious project, but i hope it is going to be cool.

I got the idea to the case in a woodwork lesson i had.. and i started immediately.

In the beginnign the hardware inside the case, isent that great, but that will change along the road.
Actruly i dont have alot of money , but i can assure you that it will be great.

The PC is going to be me main computer, cuz right now I only use my laptop.. not great.

THE ORIGINAL PROJECT-LOG: http://forums.bit-tech.net/showthread.php?t=144799

Here is some pictures.. [Remember im not done it needs some paint an a little bit of modding]


Before i started on the case i paintet the PSU:

Here is the "Donor-PC-case" i used.. heh it needs a vacuum-cleaing... alot:

I drilled a hole for the lille speaker:

Here is the front part of the PC: [Not done yet]

Here is the top part of the PC: [Not done yet]

Here is the right side part of the PC: [Not done yet]

Here is the left side part of the PC.. witch i needs a lot of grinding: [Not done yet]

Here is the backside of the right panel on the PC.. I cutted the "Metal-thing" out from the "donor-PC-case" i used [Not done yet]

Ups .. I pushet to hard... Now i have to cut a new piece:

I have to paint: [1st layer on the "metal-part]

Those to look nice together hehe: [The blitz on the camera i makeing a little "flash-thing" on the picture :S sorry]

Here are some new pictures, but remember i have to putty the cracks and paint it, + some grinding and modding:

More to come

[p0Pe]

i have been waiting for this one welcome to tbcs zwiks!

[zwiks]

Thank you p0pe heheh

[Luke122]

Looking good so far.. keep the updates coming.

[zwiks]

Yeah i will . maybe one more in 30 minutes-

[zwiks]

Hi guys,
its update time .. Here is the real deal


Jealous guys?? hehe:

Do you see any ugly edge??:

After i cut the new pice i started rasping the last edge "PYYH ! that was tough" heeh:

And this is me doing the same thing:

Some things is used:

And now to the "putty-work:" (i think its called )

And some "paint-preparations" and sanding.. pyhh im glad its over: hehe

And some more:

This is were i paint: (its my little-sisters play-house)

This is how the case looked like, after 2 layers of primer:

This is how the case looked like, after 1 layer of paint:

This is how the case looked like, after 2 layers of paint:

More to come

[Tavarin]

Looks like it's going to be a great case.
May I ask what kind of drill bit that is? I need something to make my fan holes and that looks perfect.

[Wag]

Man I love wood cases. Just can't get enough of 'em. Keep up the good work man.

[zwiks]

Its a 72mm homemade drill just the perfect diameter for 80mm fans

[zwiks]

Hi guys,
its update time .. Here is the real deal


First i cutted a pice of paper out, and painted it orange like the case: (Diden´t want that AC Ryan logo )

Using some tape:

And painting:

Have to paint this Orange like the case:

Have to scrape the paint left overs:

Scrape this off:

Have to fix/paint [Black] this:

Have to Cut off the red area:

Now its done, and its a little bit wet.. but you get the idea:

Here i used a nut, cuz i fittet perfectly, and it maked the "bay-tower" more stable..: (I used that metal-putty i just recived today, to make it fit together)

Here i maked a "angle-thing" .. also to make the case more stable:

And one more:

Here is the "wood-frame," without the "metal-frame"..: [The naked-wood needs to be black]

Here is the "metal-frame," without the "wood-frame"..: [It needs a paint-job very bad, I know it] [And some vacum-cleaning and so on]

More metal, which also needs a paint-job very bad, I know it

Here is a sketch i quickly made.. i shows the colo... arh forget it you know what it shows when you see it

Here is after the painting .. (ist at the drying-fase)

Here is what it looks like:

And one more:

Ready for the paint-job:

Yesterday I also painted the disc-drive, here is how it looks like:

Yesterday I also painted the disc-drive, here is how it looks like now:

Then I painted the "naked-wood" with a primer:

And i had to assemble the dics-drive, here is the parts:

This is the finished product.. I´m pretty happy with it:

More to come