TBCS New Members Introductory Thread

[AmEv]

^It's a lie.

[omkarthik]

hi guys this is my first forum. I am starting a pc modding from scratch... hope it vl be successful in india. Also i need help from u in this project. Wish be that i could finish it up well in the end.

All the best for modders.

[Neodymium]

Hello all!
After an extensive read of a fellow Canadian, J-Roc's Citrus G5 mod project log, I was inspired to see if I can do something similar. I have been lurking and finally decided its time to register, hopefully mod my version of the G5 and post it here. Have learned a lot from many of the amazing modders here on TBCS and every time I come back, its something new to see and learn! Good to be here.

[rohit8]

i'm just curious if there is a way to post pictures of my cases on your site? a very interesting site i might add.

[TLHarrell]

I met Paul Capello and the Doom 3 casemod at Maker Faire a few years back. Too awesome. I've been a model builder for a long time, and have been building PCs since high school. Currently working on my own casemod and hopefully will be able to enter it in some competitions. Enjoying the site already, and looking forward to adding more of my mods as time, money and victims permit.

[CoderHead]

Hey everyone, I'm Jon. I've been building PCs for a long time but am new to modding. For my first project, I've decided to do a mineral oil submerged PC with a monster lab theme. I've started a blog to document it all here (http://computingwithoil.wordpress.com). Hopefully it turns out well! I'm completely blown away by some of the mods I've seen on this site and it inspires me on a deep level to do something really cool.

[Fradler]

Hey everyone. New to the forums, always looking for new inspirations and to stretch my modding further. Nothing spectacular yet, just basic "keep it simple" based on funding. Transitioning from the Military soon, looking forward to a nice bump in pay and will be putting that towards my computer habit. Hope to show the fruits of my labor here. Now on to more browsing

-Fradler

[DarKdanao]

Hello my name is Dan. I'm starting in the modding, and i seek inspirations and tips for a future modding. Your site contains any hardworked case, so i'm joined you.

[Ann20]

Hey everyone! Hope you're all good

[Neodymium]

i'm just curious if there is a way to post pictures of my cases on your site? a very interesting site i might add.
Not sure if you found it already, but here you go:
http://www.thebestcasescenario.com/forum/showthread.php?t=23313

[Ozziesironmanoffroad]

Hi everyone, I'm Nick, and I'm not an alcoholic.

I currently live in San Diego, and I'm an oil changer/tire boy at an evil auto shop we refer to as "hell" or "this darned place.) (edited for language).

I'm currently studying to get my A+ certification, so I can get out of the auto repair industry.

I found this site on google and have been lurking for awhile. Love the designs... Especially the Ferrari HTPC. That's dope.

Anyways, I got a huge older abit server case that can fit 6 hard drives and 5 5.25 drives, and what seems like 3 power supplies. I call it the monster. I'm wondering about what I can do to it. Reason for joining. I've always wanted to customize a case. I can build computers left and right, and troubleshoot them, but modifying cases is beyond my expertise... Until now.

Great forum guys lookin forward to seein more awesome builds. (like the vodka bottle coolant rez, that was insanely awesome.).

[Aldersan]

Anyways, I got a huge older abit server case that can fit 6 hard drives and 5 5.25 drives, and what seems like 3 power supplies. I call it the monster. I'm wondering about what I can do to it.

Easy.
3 Seperate computer systems, for different purposes (e.g. surfing the web, gaming, and something else you can think of on your own, guest pc maybe?)

Watercool each one with a seperate loop and color scheme, and make switching between them a peace of cake! (e.g. 3 way toggle switch, or something :D)

And then of course make some cool case design mods, because this threesome pc would be awesome, and must look awesome!

Good luck! :D

[Ozziesironmanoffroad]

Easy.
3 Seperate computer systems, for different purposes (e.g. surfing the web, gaming, and something else you can think of on your own, guest pc maybe?)

Watercool each one with a seperate loop and color scheme, and make switching between them a peace of cake! (e.g. 3 way toggle switch, or something :D)

And then of course make some cool case design mods, because this threesome pc would be awesome, and must look awesome!

Good luck! :D

Thanks! That is a useless but incredibly attractive idea.. Having 3 computers inside one. Hah. Not gonna spam this thread will start my own. Thanks again!

[Aldersan]

Thanks! That is a useless but incredibly attractive idea.. Having 3 computers inside one. Hah. Not gonna spam this thread will start my own. Thanks again!

Lol no prob, let us know if you need any more help for ideas, there's a ton of us running around like mice here, I'm sure together we can come up with a decent idea or two :D

[Stonerboy779]

Long time lurked finally decided to join.

Will start up a thread on my htpc/nas when parts come in over the next few weeks.
When I get around to it I will pull my arcade machine/jukebox out and finish it as well as take pic of my current mild modded case that is going in the arcade machine.
Need to disemble clean and finish a part of the case mod first.

Although soon will have time as full time work let's up next week for me.


Look forward to being around the forum.

[Avalon]

hello! My name is Avalon and I have just joined this forum to increase my knowledge in TBCS Community.

[Snayperskaya]

Hiya. I'm new to casemodding, and found out about this forum recently. I'm really impressed with some fine work done by folks here. I hope that someday I'll be able to do some cool things too. :D

[Robotguts]

:smoker:Hi all, I have been awaty for a while but I`m back hoping for more of the great inspiration that is on this site, hope to contribute... lolxxxx:D

[IMtech]

New member here! :banana:

Hello to everyone from Australia! :smoker:

[Cadimus]

Greetings All,
Hmmm, built my first comp in 1983 from an 8085. (Yes, I'm an old phart). Learned programming in 1972 on a RCA/UNIVAC Spectra 70. And am now getting into micro-controllers.

[Airbozo]

Greetings All,
Hmmm, built my first comp in 1983 from an 8085. (Yes, I'm an old phart). Learned programming in 1972 on a RCA/UNIVAC Spectra 70. And am now getting into micro-controllers.

Welcome!

There are several of us old farts here. I still learn from some of the "kids" around here and am amazed at the talent. Pull up a chair and sit for a bit!

[Cale_Hagan]

Greetings All,
Hmmm, built my first comp in 1983 from an 8085. (Yes, I'm an old phart). Learned programming in 1972 on a RCA/UNIVAC Spectra 70. And am now getting into micro-controllers.


Welcome!

There are several of us old farts here. I still learn from some of the "kids" around here and am amazed at the talent. Pull up a chair and sit for a bit!

yes, welcome!
thank you airbozo, i love your knowledge as well.

[SXRguyinMA]

Welcome to TBCS! You built your first rig a year before I was even born :D

[RENOVATIO-DESIGN]

Hi everyone,

My name is Paul, I'm from Argentina. I work as a CG artist.
I like everything related to design, create, restore, improve etc!

Amazing talent on the forum.

[mybadomen]

Hiya guys, New member here.You may have seen me around on other Forums i am a Modder/Overclocker and am looking forward to meeting you all.

[Cale_Hagan]

welcome to TBCS! :D

[Modeler'sBrand]

Hey all!
Though I've been building my own boxes since '96, last week was the first time I ever lit one up. I was pointed here by a phenom modder of a friend on youtube (RonLeec1). I gotta say this site is extensive! Lots of stuff to learn. Lotsa ideas to explore. Looking forward to digging in!

[WizzardOz]

Hi there))

[fafirdeath]

Hello all! I am new here, of course! I stumbled upon this site while trying to find some inspiration for mods of my Thermaltake Armor + LCS case. I have enjoyed what I have found so far!

Thanks,
Fafir

[jdbnsn]

welcome!

[PowerChucker]

Hi Everyone! first post, been lurking here for a long time, figured I might as well join the fun..
im an IT Network Administrator by day, and a PC builder/Gamer by night, although i have 0$ budget.(hence my dismal PC specs)but I still love to try and mod PC's/Cases. I cant wait to actually start my first build/Mod and share it with you guys!
and Ill be happy to hear any and all of the tips and advice you all have!
hope to get to know you guys.. :up:

[Fuganater]

welcome!

[Airbozo]

Welcome from Silicon Valley!

[PowerChucker]

Thanks for the Welcome Fuganater, and Airbozo!

[Diegojavbau]

Hi , I was sure that I registered before , but my username and mail are not in the database , so it seems I'm wrong :whistler:

Hello from Argentina !!!!

[Fuganater]

welcome!

[AwesomeDreams]

Hello Modders! I come in peace :P
Im 15 and I've started making my first casemod :D

[Fuganater]

Welcome! We hope to see your worklog soon.

[PatrickP]

Hello everyone! Glad to be part of the forum!

[PowerChucker]

Welcome Patrick! hows it going?

[d_stilgar]

Welcome! Welcome Patrick and everyone else I've missed.

[Jtisdale35]

Hi everyone:banana:!

I'm Jtisdale:bunny:
and its my first time in this forum.

YOU HAVE BEEN EDITED BY THEGREATSATAN!

[TLHarrell]

Really? Spammer announcement... Go back to Spammer school. You fail.

[pangyind]

Very pleased to join the family

[jonydec]

hello

friends my name is jony dec i live in india and i am a student.

i like to play games and watch movies.
my favorite color is green.

thanks friend
jony dec

[razib12]

hi every body it is my first post

[Spineberg]

Hello there, TBCS.

I'm a computer enthusiast who got into building PCs about four years ago. I haven't built anything that was particularly fancy, just air cooled rigs in regular cases without much else to them. Over the past few months, however, I've been itching to do something a bit more involved and creative than that. Hopefully soon I'll have some absolutely amazing (or at least reasonably acceptable) case mod project to showcase.

[d_stilgar]

Welcome all! Nice to see new faces. Dive right in and support you fellow modders! Make a mod of your own (however bad or good you think it is) and post it.

[pr0udhon]

Hi guys, i joined TBCS because i want to learn from the awesome mods that are posted here an i hope to make my own one soon.

Thanks.

[Fr0zenComms]

First time on TBCS. Looks like some good stuff on here. Been using [H] for a while and need to expand my resources for modding.

Catch you in the work logs.

[waterdrag0n86]

I've been looking around the site and most of the mods are amazing. i work on computers for a living and always wanted to build my own one off custom rig, so i started the design phase for a scratch built borderlands gaming super computer. any advise is welcome. i still need to do a mock-up of the pc after i learn how to use sketch-up better.

see you in the logs.

[Airbozo]

Welcome to the forums!

Enjoy your stay and MOD SOMETHING!... LOL!

Great to have you and looking forward to your mod. What do you mean "gaming super computer"? (I know what this would mean to me, but you may have a different idea...)

[waterdrag0n86]

64Gb ram 4*500Gb sata hdd and intel i7 just for a start still looking for the right graphics card

[mountainman]

High all new to the forum but I think i have a pretty good idea I want to try out and I would lvoe some input on where to start.

[BillyPrefect]

Hi.

I've built systems, and I've got a couple of frankenbeasts running now (missing sides, open cases, things just hanging out of place cuz they weren't meant to be in the case) but I have some ideas and some thoughts, and with a wife and moving to a new house, I may have to move my toys up to where peoples can see them.

I am here for research, ideas, things to add to my kind of plans to see if I can build some toys that will be allowed to be viewable by folks in general.

Site looks great, and I'm itching to get started.

[d_stilgar]

Welcome all! We love to see new guys. Post your rigs, post your mods, or just post your support in other people's logs.

[Blackwolf]

Hello world I've joined TBCS so that I can further my knowledge on building computers and with my airbrushing hobby I airbrush design on the computer cases, right now I'm working on a close friends computer and I'm adding a John Wayne design on one side and a skull with pistol's on the other side. I've thought about calling it young guns lives on it. But the one thing that is puzzling me is that every time it starts loading up it would get the windows xp logo and it would restart over and over and I've racked my brain until I end up with a migraine. But any help would be most grateful and a big Thank you in advance.

[TLHarrell]

Welcome to the newcomers. Good to see some fresh faces. Hope to see your modding. If you need anything, feel free to ask in the appropriate forums. Plenty of knowledgeable people here who are willing and able to help.

[Scottie Daddy]

Hi.

[Pomp657]

Hi all im all new here on TBCS iv been reading up on alot of helpful subjects which has helped in the past.

But now im mega stuck and my need to pick some your brains for clues on what to do.

OK iv read the windows 7 formating help on TBCS im trying to format my pc from vista to my new windows 7 i got last week.

Iv loaded in my windows 7 already and i now have windows old files.

My problem is my pc is custom built and when i try to format my pc to try and remove the windows old files i don't get the option to delete them when following the instuctions on installing my windows 7.....I think this may be the problem the store i payed to build my pc did not program my computer properly and im missing vital files which i need to format my pc.

Question is there another way of deleting those windows old files if so how?

Massive thankyou in advance guys.

[TLHarrell]

You need to boot into a different system in order to reformat the drive. You need to boot into ANYTHING else using a CD (your Win7 install media) or something like a Linux live CD (like Ubuntu). Either one should give you drive tools like FDisk to wipe and reassign partitions. Obviously only do this if you do not want any of the original data from the drive. You did make a backup, right?

For further help, please post in the proper forum section.

[Kaidenh0]

My first post and just wanted to say hi and that I'm happy to be here! I've always wanted to airbrush since I was a little kid (don't ever forget your childhood dreams)! I finally got one and I'm hoping to knock out some good stuff soon!

[XcOM]

Hi all, I'm new and old,

Thought I would pop in now I have some spare time, I wanted to come back to TBCS,

So HI ALL

[AmEv]

We're getting people back! WOOHOO!

[kevram23]

hello...newbie here..

[TLHarrell]

Hello newbie. Enjoy the forums.

[wkussmaul]

Hi Modders,

I joined specifically because I'm interested in briefcase computers. Actually I don't have time to build 'em so I'm looking for a reliable modder who has done briefcase stuff and might want to do more.

Unlike most briefcase PCs, ours can and should use laptop guts instead of desktop mobos and power supplies. Basically take a new 15" or 17" laptop, remove everything from the case, mount it well in a secure aluminum briefcase with screen inside the lid. How hard can that be?!

Briefcase modders who can meet deadlines with quality work, be in touch!

wk

[Airbozo]

Hi Modders,

I joined specifically because I'm interested in briefcase computers. Actually I don't have time to build 'em so I'm looking for a reliable modder who has done briefcase stuff and might want to do more.

Unlike most briefcase PCs, ours can and should use laptop guts instead of desktop mobos and power supplies. Basically take a new 15" or 17" laptop, remove everything from the case, mount it well in a secure aluminum briefcase with screen inside the lid. How hard can that be?!

Briefcase modders who can meet deadlines with quality work, be in touch!

wk

Is this for a one off system or a repeatable unit?

BTW: Welcome to the forums!

[Swilken]

Seems like a fun place to be! Hey everyone, first time poster, long time lurker. There's a lot of creative stuff on this site, and it boggles my mind how some of you guys can pull this stuff off... Personally, I don't think I've ever set enough time aside to finish anything you guys have. Maybe if I hang around enough, I'll pick up some good habits and stop leaving my projects half-finished...

[AmEv]

It just boggles my mind how some of you guys can pull this stuff off...

Sometimes, I wonder that myself. :whistler:

[roy w b]

Hi all,
Have built a few computers in my time, but the latest one has me foxed.
The front sound connections do not make sense. I have on the m/board:-

mic2_L, mic2_R, out2_R, J_sense, out2_L, gnd, presence#, mic_ret, out_ret

The leads from the panel are:- return R, spkout L, return L, spkout R, mic in,
ground, mic bias.

Can anyone help?

[Rhino73]

Hi there, Rhino73 from Manchester. Thanks for 'avin me. :)

[Fuganater]

Welcome!

[d_stilgar]

Hi all,
Have built a few computers in my time, but the latest one has me foxed.
The front sound connections do not make sense. I have on the m/board:-

mic2_L, mic2_R, out2_R, J_sense, out2_L, gnd, presence#, mic_ret, out_ret

The leads from the panel are:- return R, spkout L, return L, spkout R, mic in,
ground, mic bias.

Can anyone help?

return R, , return L, mic in, mic bias.

gnd = ground

mic2_L =
mic2_R =
mic_ret = (might just be another ground)

out2_R = spkout R
out2_L = spkout L
out_ret = (might just be another ground)

J_sense =
presence# =

That's all I've got. I would do some google-fu, but I've got to write right now.

[HAVOK]

Hi all. New to the site but happy to be here. Will post the build I'm currently working on.

-HAVOK

[masenzo2000]

hola soy de argentina, casi no hablo ingles, hago aerografias y encontre mucha info aca, gracias por agregarme

[UMich Hockey]

Hi!

I love reading through work logs and getting ideas. I have a bunch of them myself, but I wish I had the ability to make them a reality. Thanks for making this forum and for having me.

[doveman]

Hi all

I've been thinking of doing my first scratch build for some time but kinda need to pull my finger out now as I've got a lot of work being done on my flat in a few months, so I need to get my PC off the bench and into a case before then so I can move it and I really don't want to spend £100 on a case that isn't even what I want (I'm limited in cases I can buy anyway, due to the size of my Antec CP-850 PSU).

Anyway, love the pun in the sitename, which was one of the things that drew me to this site :) I'll post my ideas in the rookies section and ask for advice there.

[Fuganater]

Hi all

I've been thinking of doing my first scratch build for some time but kinda need to pull my finger out now as I've got a lot of work being done on my flat in a few months, so I need to get my PC off the bench and into a case before then so I can move it and I really don't want to spend £100 on a case that isn't even what I want (I'm limited in cases I can buy anyway, due to the size of my Antec CP-850 PSU).

Anyway, love the pun in the sitename, which was one of the things that drew me to this site :) I'll post my ideas in the rookies section and ask for advice there.

Welcome!!

[Java Gamer]

Hi, everyone, I join this forum to learn from you good guys and share my good experiences with you.

[rockysamule]

hi friends i have just joined this community right now and i want to know more about it.

[AmEv]

Downloading.

Oh, my ISP is gonna hate me for it....

[harp3]

Hey everyone,
I was looking for some Arduino info and joined the forum. New to Arduino, looking to learn...

[Pwnography6]

Hi everyone :p

[TLHarrell]

Nice to see you here.

[trius]

Couldn't find any new thread starter, so the reply button subs. Hello to all from Bay Area! I'm doing custom build of first home PC. Tired of being on the 'time clock' at library. Have not been able to track down any full-size tower ATX case having what I want (steel chassis, aluminum panels, & maglev fans), so looks like I may have to do some modding, and hope to find some direction here.

[TLHarrell]

San Francisco Bay Area? I'm down in Morgan Hill. I'd recommend hitting up Weirdstuff Warehouse and Halted in Sunnyvale if you're looking for older hardware.

[trius]

San Francisco Bay Area? I'm down in Morgan Hill. I'd recommend hitting up Weirdstuff Warehouse and Halted in Sunnyvale if you're looking for older hardware.

Weirdstuff looks excellent! Thanks. Is Halted the same as HCS Electronic Supply of Santa Clara or the one in Santa Rosa? Didn't find anything in Sunnyvale.

[brianwhite]

Hello everyone. New to the site so I thought I would introduce myself. My name is Brian White and I am just another fellow modder.

Some of you might have seen my recent Project that was featured on the April cover of CPU magazine "Project Green Machine".

My friend told me about this site so I thought I would come on over and share my worklogs here with everyone.

Thanks for having me.

[Powerglide]

Hey all, I've been voiding warranties and modding computers ( along with cars, houses, guns,etc ) for decades. Not much of a forum dweller but the exchange of information, new ideas, etc. id crucial. I picked this particular forum because here I find more of what I'm looking for, well done TBCS!!!

I have a mod that that's been knocking around in my head for a while but it's still fragmented, myself I can build, weld, cut, paint just about anything it's design that's difficult. So I'm here to learn and share.

PG

[d_stilgar]

Welcome Powerglide! Nice to have you hear. Feel free to post sketches or 3d models of ideas to get feedback or design ideas. Some people can just build and figure it out as they go. I go back and forth depending on the project (and if I have money). If I don't have money then sometimes it's really fun to just make a 3d model of the computer.

[flamnturtl]

Heloo,I am David DeWitt owner of Flamn Turtl Custom art.I love art and paint mostly with the airbrush painting motorcycles,helmets,t-Shirts and illustration.I love looking at art and grow as an artist seeing what others are doing so that I can learn more.I believe as an artist for one to get betteer they must always be willing to learn from others and experminting.
Thats it for now,God Bless, David

[Cale_Hagan]

Welcome! always nice to see more people! :D

[lordfred]

Hi guys, I stumbled upon this page while googling on aluminum computer case which I'm trying to build. I'm optimistic I can do this but I need help and advice on other members out there..

[Aortiz10]

Hello peeps just introduction myself and am saying hi!!
Looking to do some serious case modding

[d_stilgar]

Great to have you lordfred and Aortiz10. Feel free to dive in and start asking questions and posting pictures. We're happy to give advice, answer questions, or just be your cheering section.

[onevoicewild]

Hi everyone! My name is mike and though some very fortunate circumstances I'm in the middle of a sponsored build named Unforgiven
The Metallica Build. I'm just an normal working guy, but do to some fantastic friends and great company's I've been given the opportunity to do a major build on a 900D. Out of necessity I do a lot of my work by hand, Which is both satisfying and painful depending on what I've got myself in to ha ha. I Love to be in the modding community to learn from the incredible modders that amaze me with their skills and creativity. Glad to be here! see you in the forums.

[d_stilgar]

Welcome to the boards onevoicewild. Can't wait to see your build.

[fblah]

Hey everyone!

I'm new to the mod scene. Working on my first build now feels great! Its not much but I'm just starting :)

[d_stilgar]

Welcome fblah! Can't wait to see your first build.

[Theophilus]

just joined this forum and hope to solve some of my nagging electronics problems here. For a start, I have a project at hand were wireless data received by (arduino + xbee combination) connected to windows 7 pc running megunolink is inconsistent with the data sent by another xbee wirelessly enabled arduino stand alone project. I know this because , when i use (xbee + xbee adapter) connected to the pc running xctu, i get the actual data sent (on the Xctu terminal). Why is this ?. I neet to plot the data received with megunolink which only interacts with arduino boards, I wish it could with the xctu. Can someone tell how to resolve the problem ? Tanx in advance.
By the way, i am from Nigeria, and much of this electronics stuff is not our way of life, but i am hoping to change that in my own little way. So pardon me if you think the solution to this challenge is too easy for me to seek help.

[BooglesMcGee]

Hello all, just joined this site after looking for a community to talk about my computer plans/projects with. Just starting to get into custom computers. Had a friend build me a budget gaming rig about a year ago and I'm starting to get into case modding. Just simple stuff for now, not sure if I'll get into the hardcore mods or not. Anyway, here is what I'm working on now:
http://www.thebestcasescenario.com/forum/showthread.php?33817-Filling-up-my-empty-drive-bay-with-some-fans&p=380507#post380507

[TLHarrell]

Welcome. We can always use some fresh new members.

[rajatGod512]

Hi all , this looks like a cool forum . I joined because I haven't joined a new forum in a long time ... :D

[Jermin8tor]

I am not new to this forum.

I lost my friend Bucko nearly 8 years ago (Feb 2008 ). Since then I have changed considerably. I am back now and see this forum has grown massively. I also see a lot of old members are still around.

I hope I can help others learn and grow in their tech knowledge if needed.

Thanks

[d_stilgar]

Welcome Jermin8tor!

I remember when we lost Bucko. It's weird being on a forum long enough that you get to know people, and then weirder when they die and are memorialized, and then weirder still for those events to have happened so long ago.

If I ever find a spare minute I promise I'll start posting more again.

[OvRiDe]

Hello Jermin8tor and welcome back!

Its hard to believe it's been 8 years, I too still remember that day vividly. I do miss his sense of humor, and his wacky projects.

Kick your shoes off and relax while your here, you are among friends, and we are glad to have you around.

Curtis

[Jermin8tor]

Hello Jermin8tor and welcome back!

Its hard to believe it's been 8 years, I too still remember that day vividly. I do miss his sense of humor, and his wacky projects.

Kick your shoes off and relax while your here, you are among friends, and we are glad to have you around.

Curtis

My leaving was more of a falling out. I was in a bad way after Bucko died. I live in America and he lived in Australia, but he became a really good friend of mine.

I was young, a new father, very frustrated with life, and lost the only real friend I had to help me through it.

I apologize to Paul and other mods here who had to endure that.

I did finally finish my "Finding Nemo" mod, but I sold it years ago to help pay rent and any pictures I had of it are long gone from the data I lost during my divorce.

At any rate, I promise I am not here to make any waves (for those who have figured out who I am). I am only here to browse, reminisce, and be as helpful as I can.

-J

[Fredd]

Hi,
I started modding recently. I have built PC for my a friend and my brother. I want to improve at it. I hope I can gain more knowledge from here.
Thank you.

[d_stilgar]

Welcome Fredd! We'd love to see those projects (and more) here.

[TedBobby]

Hi, everyone! Newbie here. I'm glad to have found this great online PC building community. I'm hoping to learn more from the other members here. Cheers!

By the way, just in case anyone’s interested, my neighbor is selling an American Force Trax SS and Nitto tire package (https://4wheelonline.com/af-independence-ss-ironman-all-country-mt-package.298675.0). If anyone’s interested, feel free to PM me.

[OvRiDe]

Welcome aboard! There is a lot of good information still here, but unfortunately there aren't a lot of people posting these days.

Curtis