Returning to the barrel I am assembling some things and putting them inside.
*
It is getting shape, little by little, there is not much left.*
Now I have to work on the lighting. Each lamp comes with two controls and I cannot connect both to only one. So I will operate both lamps with only one control. How to do this, … well, check my crazy idea.
*
Here I amgoing to desold the controls of one lamp and I will put an extension to operate both controls of the lamps.
*
*
So when they are finished, I turn on one, and I send the signal to the other control of the lamp, and also to the sound sensor and the regulator of the same.
This is how it looks like.
*
*
*
*
And it works perfectly, nothing is burned.
*
*
Now I am looking where the hard disc will go. First I made a basement for the optical unit from an old cabinet I had. I cut the basement at the right size for the hard disc of a lap top. As this hard disc needs an adaptor for the IDE connector of the PC, I left it a little bit smaller so that the adaptor will not crash with the basement when connected.
Here it is already painted.*
*
*
*
**
Now I only have to fasten the cathodes of the red light, the power supply and the buttons to turn on the computer and the reset.*
But first I have to prove if everything is working the right way, so I did the first tests so see if the computer works.*
*
As the power supply will be at the bottom, I will fasten it, so that it will come out together with the mother board.*
*
Here you can see it with the track system. I pull, and all comes out together.
*
*
Here the computer is turned on, and I am installing the operating system.*
*
*
*
*
*
*
There is not much left, only the buttons and closing the barrel.