A quick "Control Panel" mod i did

[Bucko]

I think the fan could be quite useful! Often here in Summer I want a small fan blowing air across me. I've hooked up a PC fan to sit on my desk before to help keep me cool.

[slytherock]

Cool and clean

[Cooper]

I love this mod, It's calm and very stylish. My two favorite thing when it comes to customizing. I have never been a fan of the 1 mil wires and tubes all over the place, give me something simple and stylish anytime. +Rep

[.Maleficus.]

Looking very cool. Again, great work man.

[DAE_JA_VOO]

Thanks for the comments guys!

Sanding and polishing. Start with 400 grit sand paper, work up to about 1000. From there, you can quit, or use a buffing/polishing compound to get the edges s00per smooth.

You can also repair scratches that way.

This is where my "secret" comes in. I sand all the way up to 2000 and THEN only do i polish. Never in your life will you see edges as smooth as these

[jdbnsn]

[elbarto241]

congrats on such a simple yet effective mod i dont trust those fans either

[Remy]

+REP for sure.

Art and engineering make such good bedfellows. This is both a simple and clever example of that at work. +rep

I very much agree with you.

DAE_JA_VOO ,
That bend in your plexi is nice. Very straight and sharp. How did you get your bend so clean like that?

[solja]

d0000d I want one but I want a red led fan on mine hehe use the fan to cool me off in intense gaming sessions

[DAE_JA_VOO]

Thanks for the comments guys!

Awesome!! Woohoo!!! That's my second front page link in about 3 weeks!

Thank A lot man!

That bend in your plexi is nice. Very straight and sharp. How did you get your bend so clean like that?

Very simple really. I just clamp the plexi down onto my work bench (the edge is a 90 degree bend) and then heat up the plexi, then i just bend it using a piece of wood. I'll take some pics next time i do it