Project M2 (Matriarch Rebuild)

[Acey]

Is that base solid paper pulp?
surely some holes would help it dry faster?

100% paper. Thought of paper-coated styrofoam but spray paint eat through this thing like rat on cheese.

Looking seriously good my friend.

Thx mate. Anymore new stuffs? Haven't really got time to go through any worklogs nowadays till I get my own line (again).

another one!?! yeah you got some wicked skills with that paper boy. truly unique

LOL. I got another 2 in my head hahahah but gonna take a break from modding after this one, probably a scratch-build end of this year once I get more $ from work.


There won't be any photos this week. Back in my hometown (about 7 hours' drive) to do some last minute packing before I start work at the new city next Wednesday. Come back to grab my hardwares and ransack the house to see if there's any stuffs to scavange for the case. So far found a soon-to-be mousepad.

A lil' progress on the case since I only worked on it 3 days this week. But once I get back there's a lot of work to commence. Got these few days to go off mode from modding and decided what to continue when I get back. Here's the progress (text only :wallbash: ) and what other stuffs I need to do.

Top: layered and laid the 'frame' for the stacked design on top. Something like Pprz's top panel but single-lined, much larger and taller.

Sides: finished and aligned with the front panel. I'll probably re-do the "MII" lettering into smaller size, a base for the letters, frame. Then stick it to the lower bottom corner of the panels.

Front: did some curves on the top part linking the face. With my ROM in hand when I get back tomorrow, can start working on the thickness of the drive frame and stealthing bezel. Need another UV-Green VIZO 120mm for bottom intake, I got only 1 so far. Will fill in the bottom part of the front (too empty) and merge with the base.

Base: the curves have been 'carved' just like in the sketch. Cut off under the front panel so the front is one piece with the base. Once all dried time for detailing.

Mousepad: going the easy way this time. Got a milk-can plastic cover and will fill it up to the brim and then the other side, that way both sides will be smooth. Keeping it simple in the middle and wings designs on the sides. So its gonna be pretty large once done.

Mouse: re-using the MX150 from Pprz, same design, different paintjob. I just can't leave that mouse alone since most mouse in the market can't even fit nicely when you have the fingers as long as a circus freak.

Keyboard: getting a new one once I get my first paycheck in 1.5 years (lmfao) end of this month. Aiming towards smaller sized k/b to give offset the size of the mousepad. Gonna hand paint the letters in.

Mouse case: somewhere to keep the MX150 and keep the design intact if I can find/afford a newer design soon. Using a Ferrero Rocher medium-sized choc box (clear thin plastic) that I scavenged from home.

LCD: leaving the back panel alone, gonna try to disassemble the front cover. Most job will be done on the stand and span wings all the way out and curve it into the frame itself.


So that's basically all that's left to do for this one. Gonna leave the speakers alone. Took it apart and noticed both top and bottom part are soldered together so can't really take the insides out and work on the box. See you guys next week

p/s: can't log-out from this bloody pc in the internet cafe so any posts from this onwards ain't from me.

[Eclecticos]

A truly incredible project. Its like the Frankenstein of pc cases.
May even come to life and fly away. +Rep

[Acey]

A truly incredible project. Its like the Frankenstein of pc cases.
May even come to life and fly away. +Rep

If 1 day I go missing from every forum you'll know what happen hahaha

update time...

Front Panel

Did the alignment and some touch ups on the cracks.

Patched some holes at the back to hold both sides

Top Panel

I got a BMW

Looks really horrible, once it dried everything bent...

Be tearing them up tomorrow and redo them


Mousepad

Little indent from the plastic cover itself. Drying it now and should have both surface extremely smooth compared to last one.

Box

Still yet to work on the detailing.

Base

Lol the base fell off while still drying (I flipped it around). Too heavy while its still wet, just like Rosie O'Donnell hanging on to a string on the 7th floor. Gonna rebuild it with 2 layers of styrofoam.

That's all for now. In a rush again. See yall next week

[DonT-FeaR]

oh very cool!

loving it

[The boy 4rm oz]

Thx mate. Anymore new stuffs? Haven't really got time to go through any worklogs nowadays till I get my own line (again).

Any progress on LEXA? I finished her, the mobo died, the CPU block corroded and I built her again lol, just got some final touches to do and I am doing another photo shoot. I will throw you a link when I do.

This whole thing is looking great. I really liked your original design but I must say that your revision is much better, excellent work.

[si-skyline]

Looking great

you got sweet line up with side and front panels, good job

[DonT-FeaR]

my case.. vento massive update soon

[Acey]

oh very cool!

loving it

Thx mate

Any progress on LEXA? I finished her, the mobo died, the CPU block corroded and I built her again lol, just got some final touches to do and I am doing another photo shoot. I will throw you a link when I do.

This whole thing is looking great. I really liked your original design but I must say that your revision is much better, excellent work.

GL with LEXA.. a lot have changed for the front panel

Looking great

you got sweet line up with side and front panels, good job

Thx mate. Re-aligning the FP and sides. Somehow newspaper is of poor quality compared to white A4s. It shrinks

my case.. vento massive update soon

Will update in 2 days.. a lot different now. Could say its 80% complete and some test-paint done on the sides. Probably will spray it with all the panels slapped on together.

After this one's done I might go AWOL for a couple of months and try out plastering. Should be back in action early next year... Next mod might be this

[Waynio]

Cool, a paper mache artist modding pc's, looking awesome m8 . +Rep

[Acey]

Cool, a paper mache artist modding pc's, looking awesome m8 . +Rep

Thx mate updates below...


Front Panel - Done

The forehead looked kinda empty. Stripped the original top panel off and didn't really plan to mod that night till I fool around with the scraped designs.

Hammerhead lol... then broke them into halves and just place them on the forehead. Looks good, green light. Waste not...

Looks like certain body part lol.. And the power switch (don't use the reset button at all)

Done...


Side Panels - Test Paint

Some test paint on Tuesday to see what it looks like...

Here you can see its bluish, but then off the sun it's hardly visible so gonna re-do it. Chuck in some lime green and cobalt blue, randomly mixed and painted

Still missing the bluish effect.. nvm, test phase hehe


Top Panel - Done

Scrapped the last one.. now its done. Keeping it low profile so this is the only thing I can come up with for "low profile"

Those are some big-ass bras to fill...


Base

Re-built. Cut out 3 pieces of styrofoam and glued them together using UHU glue instead of super glue (eats into the thing). Then hold them together using bent paper clips.

Layered some paper between the bottom of the case and the foam, and another layer below the foam. Coat everything up at the side.

Take out the extra and this is what we have.

On the inside since I took out the feet, there are holes so gave it a lil grip..

Hopefully this should dry much faster than the previous all-paper build. And since I'm working wouldn't really have to touch it as I only get home after sunset.


Mouse

Same one from the previous mod, only changing the color. One side got wrecked while being in the box that was shipped back when I moved home.

That's more or less the type of blue-ish highlight I want for the whole case. Just need to get the other side sprayed and then in comes the green.


That's all for this week... 80% near completion for the case itself. Just paint, a lil bit of the insides worked, and the 120mm bracket below the ROM. After that its keyboard and the LCD.