-
Water cooled Madman
Re: Obsidian: A Scratchbuild "HTPC"
Ok this has taken to much of my time, but non the less it was fun. I learned much about 3D modeling (in sketch up that is). Here are my final release renders.
This picture here shows the look I am going for. the hole in the top cover of the case will be filled with mesh (I coudn't render it sorry) as will be the hole in the front of the case.
And a final picture of what we can expect in the future when I am turning off the lights.
Till next time...
Edit: I rendered this just to show it to you with a gloss finish.
Last edited by Cheron; 04-02-2008 at 05:09 PM.
Reason: Added a render.
-
Re: Obsidian: A Scratchbuild "HTPC"
-
Re: Obsidian: A Scratchbuild "HTPC"
Nice I like the concept of this case. Seems to be going along nicely as well.
-
Re: Obsidian: A Scratchbuild "HTPC"
Nice progress, good design, and an interesting choice of materials. +rep
________
Health Shop
Last edited by blueonblack; 02-24-2011 at 02:26 PM.
-
Water cooled Madman
-
Re: Obsidian: A Scratchbuild "HTPC"
I love the idea for the switch. Can't wait to see how it turns out.
-
Water cooled Madman
Re: Obsidian: A Scratchbuild "HTPC"
This is the basic wiring diagram for the option with the hidden reset (or even no reset at al.) as you can see in the diagram both the power and the optical drive conector (the last is home made, more on that later) are conected to a relais and a Momentary switch(MSwitch). the relais is in rest in the diagram but when you push the MSwitch the motherboard will powerup the psu. this will switch the relais and the MSwitch becomes the open/close for the optical drive.
Stay close more to come.
Yours Cheron
-
Overclocked
Re: Obsidian: A Scratchbuild "HTPC"
-
Water cooled Madman
Re: Obsidian: A Scratchbuild "HTPC"
people I am putting Obsidian on hold. why you ask?....... after numerous attempts to make a nice rounded front for this case I have given up. at least for now. I just don't know how I can make it happen.
Ill be making a start on my next case. It's my old "modded" lian li case called warlock which ill be resurrecting. but more on this later.
I hope some of you can help me out here.
yours Cheron.
-
Re: Obsidian: A Scratchbuild "HTPC"
Oh too bad I would have liked to see this one done. How were you trying to make the front. Bend something into a round shape? I would think it might work out if you carved the front out of foam and then put bondo or fiberglass over it and sanded that to a nice smooth finish.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules